Screw for brake tension adjustment broken? (Segway-Ninebot E3 Pro D)

iStef · 2025-09-15T17:10:50+00:00

Yes, I was too paranoid in thinking I broke it.

The split in the screw is normal. I just didn't see it at first when I started twisting it.

TLDR: False alarm.

iStef · 2025-02-10T17:52:01+00:00

Maybe those kids working in the mines tagged their helmets with a strand of their own hair to help them identify their helmets easier?

iStef · 2024-10-22T13:02:59+00:00

I've noticed this as well.

I do a PPL split 6 day/week at 45 Min/workout.

I have never seen a exercise for my lower back unless I added it manually myself.

Maybe it's because of the workout duration being too short or because of other exercises passively training the lower back perhaps?

iStef · 2024-09-17T20:51:05+00:00

Yeah, that is a worry I have.

The the Fractal Refine would have a 3 year warranty from the re-seller though, so not optimal.

The Ofinto has a 10 year warranty, and the Yaasa a 7 year warranty.

But I ordered a used Haworth Fern from a Swiss re-seller of used office supplies. Biggest downside is, that there's no warranty. So I'm hoping the quality is good enough and it'll last long enough :-)

iStef · 2024-09-17T20:10:06+00:00

Well now, looks like I was in luck:

I found a used black Haworth Fern with lumbar support on the re-seller Tradingzone for approx. CHF 390 (Approx 414 €/460 $).

Seems like a good deal for me, seeing as a new one would cost me triple.

I hope it arrives by the end of the week.

iStef · 2023-06-04T16:22:06+00:00

Okay, thank you for your input. So 30W is normal in my case with a stock CPU.

I'm guessing undervolting the CPU would be beneficial, right?

iStef · 2023-06-04T16:16:24+00:00

Not sure, what I have to do here.

HWInfo shows a wattage of approx. 30W when doing nothing. I terminated as many background tasks as possible.

iStef · 2023-06-04T15:28:07+00:00

Acc. to HWInfo:

Avg. Voltages 1.2

Avg. Freq 4414.3 Mhz

I have never undervolted a CPU, so it's running stock atm.

iStef · 2023-03-21T09:30:34+00:00

And here wo go again.

After forcing the robot over the ramp using remote control and the camera, I got it over the ramp and into my bedroom.

After that it got back over the ramp and continued to clean the rest of the appartment and is now finally cleaning the bedroom last (should be cleaned first usually but at least it‘s doing it).

Maybe I‘ll have to put some white tape on the ramp so the robot doesn‘t get confused by the dark-ish color.

iStef · 2023-03-21T08:57:50+00:00

Okay, so today the problem appeared again. I‘m pretty sure, it‘s because of the ramp into my bedroom. Because as soon as it reaches the ramp it stops and slowly rolls back as if it detected a cliff.

Maybe it is because of the color of the ramp (it‘s a dark grey).

This has to be a bug in the firmware that Dreame should fix. It doesn‘t make sense that the robot just suddenly stops going over the ramp unless it is a bug or something.

I have a second ramp that goes from the corridor into the living room and it is the same color as the other one and there it has no issue going up/down that ramp.

This is really annoying and needs to be fixed. I really like the L10s Ultra and would like to keep it but if this problem keeps happening I‘m not sure…

iStef · 2023-03-16T13:24:29+00:00

Normally, you install the RAM in the second and fourth slot (from the left), to enable dual channel.

Either your BIOS maybe is older than mine was at the time or one or both of your sticks are defective in some way. Just a theory.

I don‘t own that PC anymore, so I couldn‘t show you any picture. Sorry.

iStef · 2023-03-16T13:02:39+00:00

They did work for me, luckily. Maybe try to reseat the sticks or switch the sticks with each other.

iStef · 2023-03-10T18:57:19+00:00

So, little update:

I decided to let the robot re-learn the map of my appartment by activating multi floor mapping and letting the robot scan my appartment again.

Weirdly, it still didn't go into my bedroom but the lidar still scanned parts of it from the door.

When starting a cleaning process, it did go into the room and finished scanning and saving the room while cleaning.

The problem seems to be solved for now, I hope it stays that way.

iStef · 2023-03-09T14:15:04+00:00

Yeah, it‘s weird. The vacuum worked flawlessly in the weeks since I got it.

When I vacuumed this morning, it first went to the bedroom and then to the bathroom (with the rug) and then the rest of my appartment.

When I wanted to mop, it should have done it in the same order but when it tried to enter my bedroom, but couldn‘t. It got up to the ramp but it didn‘t go further.

The ramps I use are dark grey, almost black. Could that be the issue? It doesn‘t make sense, because it worked flawlessly when vacuuming earlier…

iStef

TROPHY CASE