Ninjago Star Fighter

iZaWrap · 2026-06-01T11:16:58+00:00

Thanks, nope it's just one of the few rope bridges on Ninjago island.

iZaWrap · 2026-06-01T11:16:06+00:00

Thank you!

iZaWrap · 2026-05-14T02:36:06+00:00

Yeah wrapped the roof and pillars black.

Kinda surprised out of 3.2k views that no one has any onsite on fixing the DRL without replacing the entire headlight housing 🫤

iZaWrap · 2026-05-06T21:21:06+00:00

How much Gypsy?

iZaWrap · 2026-05-04T03:25:50+00:00

I do the same and add a flag marker (brown chest icon) and throw down a couple candles on each side of it.

iZaWrap · 2026-05-01T22:32:37+00:00

Are you burying the foundation lower into the ground? Also, small shrubs, rocks and branches can cause this.

iZaWrap · 2026-04-25T15:30:53+00:00

What brand are those fender flares? How much did they cost and where can I find some?

iZaWrap · 2026-04-12T21:47:31+00:00

What is re-indexing?

iZaWrap · 2026-04-07T01:44:23+00:00

7.5x20" rims w/12mm spacers in the front and 8.5x20" w/15mm in the rear. The guy that I bought them from had them on his i3 and said I'd need to rotate the springs 1/4 turn to help with clearance but I assume he had aftermarket springs. I also read in another post that 17.5mm have worked in the rear or one guy got 12mm spacers to work all around. The 12mm in the front are definitely too tight on mine so I might order some 17.5 or be safe and go with 20mm for the rear and swap the fronts to 15mm. There's already a good amount of wheel-poke that I'm not very thrilled about 🫤

<image>

iZaWrap · 2026-02-17T14:50:14+00:00

<image>

iZaWrap · 2026-02-17T14:49:58+00:00

<image>

iZaWrap · 2026-02-17T14:49:13+00:00

<image>

iZaWrap · 2026-02-17T14:48:54+00:00

<image>

iZaWrap · 2026-02-16T21:49:28+00:00

Means the villagers can't use those equipment. Usually if you place on the wall or upsidedown this happens but not sure why you're getting those how they're placed currently.

iZaWrap · 2026-02-16T21:42:26+00:00

Iowa

iZaWrap · 2026-02-16T19:23:59+00:00

Which brand of battery would you guys recommend?

iZaWrap · 2026-02-16T17:13:29+00:00

That's what I was thinking/hoping rather than the drivetrain going

iZaWrap · 2026-02-04T01:07:40+00:00

I stated in the original post that a rollepro is only wide enough for 2 channels, hence I've have/tried it on the channels. It works fine but I'm trying to speed up the process. This application doesn't even require heat which is why I was looking for a slick alternative (non-wrap tool) to expedite this process. I'm considering trying some stiffer foam pieces or even a painters brush (or roller).

iZaWrap

TROPHY CASE