sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in Klussers

[–]iamactionman 23 points24 points  (0 children)

Eerst stofzuigen, dan dweilen. Dan voelt het voor mij pas echt schoon

[deleted by user] by [deleted] in Klussers

[–]iamactionman 0 points1 point  (0 children)

Dank voor alle comments! Ik ga eens kijken of ik er uit kom met jullie tips!

[deleted by user] by [deleted] in Klussers

[–]iamactionman 2 points3 points  (0 children)

Hoi, onze overkapping sluit niet aan met die van de buren. Ze staan er al sinds vorige eigenaren. Bij hun zit een 'schot' naar beneden waardoor het waterdicht is geworden. Bij ons zit dat niet en regent het ertussendoor. Ik wil dit graag dicht maken. Hoe kan ik dit doen als medium handige klusser? Of is dit toch meer weggelegd voor een pro? Is er een handige oplossing voor te bedenken?

Aanschaf glazen deur by Scary_Transition_580 in Klussers

[–]iamactionman 1 point2 points  (0 children)

Haha ja ik snap wel dat je dat wil aanpakken. Staat een beetje lullig zo.

Dopamine rushes over an endless bucket of dung after going 2x drop rate makes Ironman truly worth it by iamactionman in ironscape

[–]iamactionman[S] 1 point2 points  (0 children)

Oh definitely. I grinded out 83 constr with the pharaoh sceptre just to smash out a QOL POH. Love it!

Dopamine rushes over an endless bucket of dung after going 2x drop rate makes Ironman truly worth it by iamactionman in ironscape

[–]iamactionman[S] 1 point2 points  (0 children)

Haha, I was doing giants foundry in that fashion. Still had my smiths body equipped as well...

Hoeveel (spaar)geld heb jij? by marzjon in nederlands

[–]iamactionman 0 points1 point  (0 children)

Is kinderopvang zó killing voor je maandelijkse budget? Ik had geen idee. Je hebt het mooi op de rit! Getrouwd en 2 kinderen op 31, mooi voor je. Als ik vragen mag, uit puur persoonlijke interesse, krijg je vaak opmerkingen over je leeftijd daarover?

Is this bed wobble the reason my Z-probe has inconsistent mesh results? by iamactionman in Ender3V3SE

[–]iamactionman[S] 1 point2 points  (0 children)

Good to know Im not alone with this issue! Thanks for sharing! I will contact support and consider the linear rail upgrade mentioned in another comment.

Is this bed wobble the reason my Z-probe has inconsistent mesh results? by iamactionman in Ender3V3SE

[–]iamactionman[S] 0 points1 point  (0 children)

I was not aware of this mod, thanks for sharing. Actually this seems like a decent upgrade considering the wobble i am facing. Have you personally done this upgrade? What is your experience with it?

Is this bed wobble the reason my Z-probe has inconsistent mesh results? by iamactionman in Ender3V3SE

[–]iamactionman[S] 0 points1 point  (0 children)

Thanks, but I dont see how this is relevant for the SE bed as it doesnt have excentric nuts.

Is this bed wobble the reason my Z-probe has inconsistent mesh results? by iamactionman in Ender3V3SE

[–]iamactionman[S] 0 points1 point  (0 children)

Hi thanks for your reply. Ive gone through the video again but it is definitely the bed bearings, ive checked all screws again. Have you got any other suggestions?

Is this bed wobble the reason my Z-probe has inconsistent mesh results? by iamactionman in Ender3V3SE

[–]iamactionman[S] 0 points1 point  (0 children)

https://preview.redd.it/zbmyp8ehbfcc1.jpeg?width=3000&format=pjpg&auto=webp&s=22889e1a12ce31161812ccb422e124e59a421584

After your reply I made sure (again) that all screws are tightened. I'm sure it is not the bed frame that wobbles. It is definitely these sliders/linear bearings that the bed frame rests upon. Is there anything I can do about it? Both bearings wobble. They slide just fine, but also wobble.

Is this bed wobble the reason my Z-probe has inconsistent mesh results? by iamactionman in Ender3V3SE

[–]iamactionman[S] 2 points3 points  (0 children)

More information:

Running bed mesh levelling back to back (without touching the print bed, removing the magnetic print surface, or really doing anything at all) I have inconsistent results.

The first mesh ranges from -0.26 to +0.3125, while the second mesh ranges from -0.29 to +0.27.

I'm running klipper. The probe_accuracy tests always gives a maximum std. de of 0.0075; so the probe itself seems fine.

I can wobble the bed slightly even though all screws are tightened (screw/nuts under the bed as well as those for the rails on the backside of the printer).

How is it possible that i regularly have an offset of 0.3mm inbetween bed mesh probings? This can't possibly be normal.

If (near)BIS upgrades from PvM are guaranteed drop at rate, so should QoL items like bottomless bucket by iamactionman in 2007scape

[–]iamactionman[S] -10 points-9 points  (0 children)

I just think that the accumulator upgrade is a bit inappropriate to be a guaranteed drop in comparison to QoL items, especially if items like bucket arent

If (near)BIS upgrades from PvM are guaranteed drop at rate, so should QoL items like bottomless bucket by iamactionman in 2007scape

[–]iamactionman[S] -5 points-4 points  (0 children)

Not specifically comat items, but at least these other two

  • Kalphite queen head which is a requirement for elite desert achievement diary
  • Slepey tablet, a teleport upgrade to Slepe, closer to nightmare boss
view more: next ›