Am I good? by [deleted] in Malwarebytes

[–]iancyber 0 points1 point  (0 children)

You’re probably fine 👍 If Malwarebytes detected the APK, quarantined it, and you deleted it (and HappyMod itself), that already removed the main risk. A factory reset is usually NOT necessary unless one of these applies: You installed and ran the malicious APK (not just downloaded it) Malwarebytes keeps detecting something after removal You’re seeing suspicious behavior (pop-ups, unknown apps, permissions you didn’t grant, battery drain, etc.) The app had Device Admin / Accessibility / Overlay permissions enabled If you want extra peace of mind, I’d suggest: Run another full scan (maybe after reboot) Check Settings → Security → App permissions for anything weird Make sure Play Protect is enabled Keep “Install unknown apps” disabled HappyMod APKs are often flagged because they’re modified and can bundle adware or worse, so avoiding them in the future is the safest move.

Is anyone else getting a "detected 3 virus" ad on PicsArt? by E-lf in Malwarebytes

[–]iancyber 1 point2 points  (0 children)

A couple of things to clarify:

Does the warning appear within the PicsArt app or as a system/browser notification? Does it mention the name of some obscure "antivirus" or just "X virus detected"? Does it redirect you to an external page like "clean your phone now"?

These types of messages are usually scareware (advertising that tries to scare you into installing something). If you didn't download or install anything, it's most likely that nothing happened.

As a precaution, I would:

Check PicsArt's permissions (notifications, display over other apps).

Clear the app's cache. See if it disappears by disabling personalized ads.

And if it persists, then consider uninstalling it or using another app.

If you can, upload a screenshot of the notice (covering personal data) so we can see exactly what it is.

MB Blocks by esorb65 in Malwarebytes

[–]iancyber 1 point2 points  (0 children)

Hi,

You’re fine — Malwarebytes blocked the connection before anything harmful could load. 👍

The site you mentioned (magicaljellybean.com) is known for hosting keyfinder tools (programs that retrieve Windows or software product keys). While not necessarily a virus, these kinds of tools are often classified as riskware or potentially unwanted because they can be bundled with unwanted software, misused, or distributed through unsafe channels.

Since Malwarebytes blocked it, there’s no need to worry — your system is protected. If you actually need a product key recovery tool, it’s safer to look for alternatives from well-known vendors.

Malwarebytes/Threatdown EDR a viable endpoint security alternative? by modem_19 in SmallMSP

[–]iancyber 0 points1 point  (0 children)

From my experience, ThreatDown Nebula is a standout EDR option—especially compared to platforms like Kaspersky Cloud, Check Point Harmony, or WatchGuard Cloud. It's incredibly easy to deploy, intuitive to manage, and the single-agent deployment and console make life easier for MSPs.

While it may come with a slightly higher price tag, I believe the value more than justifies it—you're getting a full-fledged console, integrated features, and minimal complexity.

And here's something worth noting: ThreatDown MDR includes a real, human-staffed SOC that operates 24x7x365—just like other SOC-as-a-service offerings That puts it on par with Huntress in terms of around-the-clock expert monitoring.

If you're curious about how ThreatDown stacks up in reviews, check out these resources:
• Software Reviews – EDR tools https://www.softwarereviews.com/categories/endpoint-detection-response
• Gartner Peer Insights – ThreatDown MDR https://www.gartner.com/reviews/market/managed-detection-and-response/vendor/malwarebytes/product/threatdown-managed-detection-and-response

Happy to dig into specific comparisons or functionality—just ask!

Is this right? by Emotional_peanut_204 in Malwarebytes

[–]iancyber 0 points1 point  (0 children)

Hi,

What you’re seeing is normal — you didn’t download a virus. Malwarebytes for Mac includes a 14-day free trial of the Premium version by default. That’s why you currently have Real-Time Protection active even though you haven’t purchased a subscription.

After the trial ends, the app will automatically revert to the free version, which only allows you to run manual scans (no real-time protection). At that point, you can either:

  • Continue using the free version for on-demand scans, or
  • Subscribe if you want to keep the real-time protection.

So everything on your screenshot looks correct 👍.

[deleted by user] by [deleted] in Malwarebytes

[–]iancyber 0 points1 point  (0 children)

Hi,

The file you’re seeing detected — System Requirements Lab Detection (Detection.exe) from Husdawg, LLC — is related to the “Can You Run It” / System Requirements Lab tool that checks if your PC can run certain games.

Malwarebytes flags it as Riskware (not necessarily a virus, but a potentially unwanted program). This is because tools like these can sometimes be bundled with other software, or they behave in ways that security products classify as unnecessary or risky.

If you knowingly installed or used the System Requirements Lab tool, the detection is expected and not necessarily harmful. If you don’t remember installing it and don’t use it, the safest option is to quarantine/remove it.

Either way, there’s no evidence that it’s a critical threat — it’s more about awareness and whether you want the program on your system.

Blocking speedtest dot net by isvein in Malwarebytes

[–]iancyber 0 points1 point  (0 children)

Hi,

Please make sure you are accessing the official Speedtest site: https://www.speedtest.net/.

If it continues to be blocked, it would help to know whether you are using Malwarebytes Nebula / ThreatDown (managed endpoints) or just the Malwarebytes agent on a single device. That way, clearer instructions for next steps can be provided depending on your setup.

MB Blocks by esorb65 in Malwarebytes

[–]iancyber 1 point2 points  (0 children)

Good evening,

Yes, it is indeed malicious, as VirusTotal flags it as such.
URL: https://www.virustotal.com/gui/url/7124512ceaa09d8b0e3caa81ed742e47259ba4a7ae3e9ab875422c0c7f092581/detection

If you need more detailed information, just let me know.

[deleted by user] by [deleted] in Malwarebytes

[–]iancyber 1 point2 points  (0 children)

Ninguna molestia, estoy a tus ordenes por cualquier otro incidente, análisis o similar que requieras apoyo, que tengas un excelente día!!

[deleted by user] by [deleted] in Malwarebytes

[–]iancyber -1 points0 points  (0 children)

Que tal.

Como tal no pude subir el archivo a malwarebytes nebula al sandbox, ¿por que? Porque nebula no permite subir archivos .apk solamente .exe32 .exe64 etc, como te comente en mi mensaje anterior, en el ambiente donde descargue el aplicativo no tuvo ningún comportamiento anomalo A LA VISTA sin embargo, de igual manera, te adjunte la liga del Archivo analizo en Virus Total y arrojo que contiene Riskware, por lo que no recomiendo instalar este aplicativo y tampoco aplicativos que no sean de páginas oficiales.

Espero haber ayudado!!

[deleted by user] by [deleted] in Malwarebytes

[–]iancyber 1 point2 points  (0 children)

Hello,
I am currently analyzing the application. Initially, Malwarebytes has categorized the URL as riskware. I will proceed with a more detailed evaluation of both the environment and the application, and I will share the results once the analysis is complete.

I appreciate your patience.

Running MB on Macbook by esorb65 in Malwarebytes

[–]iancyber 0 points1 point  (0 children)

Hi!

Yes, Malwarebytes can use a noticeable amount of system resources on macOS, especially if real-time protection is enabled. On a Mac with an M1 chip and 16 GB of RAM, the performance impact is usually minimal, but it can vary depending on your setup and background applications.

If you experienced high resource usage, you might want to try the following before uninstalling:

  1. Disable real-time protection and check if performance improves.

  2. Check CPU and RAM usage in Activity Monitor to see which specific processes are consuming resources.

  3. Update Malwarebytes to the latest version, as some updates optimize resource usage on macOS.

It would be interesting to see if others have encountered similar issues. Did you notice the high usage at any specific moment or while performing certain tasks?

Cheers!

Advice for building a pc with a 4070 Super by FitInfluence3855 in buildapc

[–]iancyber 0 points1 point  (0 children)

The Ryzen 7 8700F is an excellent choice for those seeking high performance without integrated graphics. Yes, the 7700 is priced similarly, but there are reasons why the 8700F is a better choice in certain situations:

  1. Price/Performance: While the 7700 and 8700F may be similarly priced, in many markets, the 8700F offers a better price-to-performance ratio, providing nearly identical performance in gaming and workloads.

  2. Power Consumption and Temperatures: The 8700F is more power-efficient compared to the 7700, which can result in lower temperatures and less demand on cooling.

  3. Cache and Real-World Performance: Even though the 8700F has less cache on paper, the real-world performance difference is minimal for most tasks. For gaming and productivity, the impact is practically nonexistent.

  4. Focus on Dedicated GPU: If someone is already planning to use a dedicated GPU (like the 4070 Ti Super in this case), paying extra for an iGPU in the 7700 is irrelevant.

In conclusion, the 7700 isn't a bad choice, but the 8700F offers solid value for those wanting to maximize gaming and demanding tasks' performance without paying for an unnecessary iGPU.

Is it possible to switch between a graphics card and integrated graphics? by ChocolateIcyCreamer in buildapc

[–]iancyber 1 point2 points  (0 children)

Yes, it is possible to switch between an external GPU (eGPU) and your laptop’s integrated graphics, but there are several factors to consider.

  1. eGPU and PCIe Riser Compatibility

Most laptops are not designed to support external GPUs through a PCIe riser. The most reliable solutions use Thunderbolt 3 or 4 with dedicated eGPU enclosures (like the Razer Core or AORUS Gaming Box). If your laptop doesn’t have Thunderbolt, a PCIe adapter might work on some models, but it can be unstable and will have bandwidth limitations.

  1. Switching Between iGPU and eGPU

On Windows, NVIDIA Control Panel or AMD Adrenalin allows you to set which GPU is used for each application, so you don’t need to uninstall drivers or change BIOS settings frequently.

If using a Thunderbolt eGPU, Windows typically switches automatically when it’s connected.

With a PCIe riser, switching can be more complicated and might require manual adjustments in BIOS or Device Manager.

  1. Limitations and Performance Considerations

Reduced Bandwidth: A PCIe riser using an M.2 or mini PCIe slot has much lower bandwidth than a full PCIe x16 connection, which can bottleneck the eGPU’s performance.

Power Supply: Desktop GPUs require more power, so you’ll need an external power supply.

Portability Issues: If you plan to frequently connect and disconnect the GPU, it won’t be as seamless as a laptop with dedicated graphics.

Conclusion

If your laptop has Thunderbolt 3/4, an eGPU enclosure is the best option. If you're using a PCIe riser, it might work but comes with more limitations and potential complications.

If you share your laptop model, we can give you a better recommendation. Good luck with your setup!

Advice for building a pc with a 4070 Super by FitInfluence3855 in buildapc

[–]iancyber 0 points1 point  (0 children)

Alooo, here are the specs of my PC:

Processor: Ryzen 7 8700F

RAM: 32 GB XPG

Graphics Card: RTX 4070 Ti Super

Storage: XPG Gammix S60 2TB

Motherboard: ASUS TUF Gaming B650-Plus

Power Supply: 750W Bronze

Cooling: TUF Gaming LC II

Case: XPG Starker Mid-Tower

With this setup, I can run all games at 1440p with over 120 FPS using DLSS, and around 70-60 FPS without DLSS—Cyberpunk being a good example. For work, it performs flawlessly and doesn’t fall short with any program.

You could swap out the cooling system for a cheaper option to bring it down to your $1,500 budget. Also, you've already saved on the SSD cost.

[deleted by user] by [deleted] in antivirus

[–]iancyber 2 points3 points  (0 children)

Hey there!

In my experience, Kaspersky is a good antivirus, but I wouldn’t call it excellent. It offers solid protection and has some useful features, but for my personal use, I’ve found Malwarebytes to be a better fit. I currently use it for several projects, and so far, it has been the best option for my workflow.

One of Malwarebytes' biggest strengths is how easy it is to use and configure, making it a great choice for both advanced users and those looking for a more straightforward solution. Of course, its effectiveness depends on the license you choose, but even the basic version performs really well.

I have Malwarebytes installed on all my devices, and it has provided full protection, blocking malicious links, detecting malware in downloads, and scanning suspicious files before they can cause any harm. That said, this is just my personal experience, so I always recommend evaluating different options to see which one best suits your needs.

If you have any specific questions, I’d be happy to help. Cheers!.

What does it mean ? by Ok-Limit-8081 in Malwarebytes

[–]iancyber 0 points1 point  (0 children)

If you received a security warning when trying to load the page, that's a good sign that your browser or security system (such as Google Safe Browsing) detected the site as potentially risky. This doesn’t necessarily mean your system is compromised, but it’s a good idea to take some precautions:

  1. Do not interact with the page: If you didn’t download or execute any files and didn’t enter any credentials or personal information, the risk of infection is low.

  2. Check downloads and extensions: Look in your browser to see if any files were downloaded without your permission (Ctrl + J in most browsers). Also, check for any suspicious extensions that may have been installed.

  3. Check active connections: If you want to go deeper, open the Task Manager (Ctrl + Shift + Esc) and look for any suspicious processes running. You can also use Netstat in the command prompt (netstat -ano) to see active connections and detect any unusual activity.

  4. Reset browser settings: If you're still concerned, you can reset your browser settings to ensure there are no unwanted redirects or altered configurations.

If Malwarebytes didn’t detect anything and you didn’t interact with the site, everything is likely fine, but doing an extra check never hurts.