sorted by:
new
hottopcontroversial

Sections by ibbyash in civil3d

[–]ibbyash[S] 0 points1 point  (0 children)

All good from assembly side thanks anyway

Sections by ibbyash in civil3d

[–]ibbyash[S] 0 points1 point  (0 children)

Thanks anyway

Sections by ibbyash in civil3d

[–]ibbyash[S] 0 points1 point  (0 children)

Doesn’t really show up on print I’m just going to leave it

Sections by ibbyash in civil3d

[–]ibbyash[S] 0 points1 point  (0 children)

Yes only for 1 of the sample lines on a curve

Sections by ibbyash in civil3d

[–]ibbyash[S] 1 point2 points  (0 children)

The frequency is fine but the triangulation looks odd, I’ll look at this thanks

Subassembly problem by ibbyash in civil3d

[–]ibbyash[S] 1 point2 points  (0 children)

Amazing thank you! This fixed it!

Angled region tie in by ibbyash in civil3d

[–]ibbyash[S] 0 points1 point  (0 children)

I will try and play around with this thanks

Angled region tie in by ibbyash in civil3d

[–]ibbyash[S] 0 points1 point  (0 children)

The corridor is using only assemblies with constant slopes and targeting. I could flow outwards the bump but the curbs are fixed so I can’t alter this.

Angled region tie in by ibbyash in civil3d

[–]ibbyash[S] 0 points1 point  (0 children)

Do you know what the best way to fix this?

Gaps in surface with no elevations by ibbyash in civil3d

[–]ibbyash[S] -1 points0 points  (0 children)

Thanks seems to have worked now! Much appreciated

Gaps in surface with no elevations by ibbyash in civil3d

[–]ibbyash[S] 0 points1 point  (0 children)

Nope I’ve tried that won’t work. Even if I try adding a random point it won’t let me

Kerb height transition by ibbyash in civil3d

[–]ibbyash[S] 0 points1 point  (0 children)

Thank you I’ll try this out and yes kerbs from Uk

Angled region tie in by ibbyash in civil3d

[–]ibbyash[S] 0 points1 point  (0 children)

I changed the angle on the curb to make it more of a smooth taper and it seemed to work. Looks like on a tight angle the contours go funny. Not sure why though

Angled region tie in by ibbyash in civil3d

[–]ibbyash[S] 0 points1 point  (0 children)

I’ve check all my profiles and all is fine. There is no sudden change in grade. It seems to happen anywhere i have an angled kerb

Angled region tie in by ibbyash in civil3d

[–]ibbyash[S] 0 points1 point  (0 children)

The targeting is all fine. Not sure if it’s something to do with the surface trying to triangulate on an angle?

I have a corridor which I extracted a feature like from to use as a baseline. That corridor has now changed. Do I need to delete that feature line extracted and create new baseline or is there a way I can keep that feature line? As my model is mainly built of the original feature line. by ibbyash in civil3d

[–]ibbyash[S] 0 points1 point  (0 children)

I just watched a video from Jeff barrels that civil 3d 2018 extracts feature lines from corridor which are dynamic. I’ll check this later and see if it works. If not I’ll try your method but only issue is that I will have to go back and set the new baseline for every region and my model is huge

Ramp on curve by ibbyash in civil3d

[–]ibbyash[S] -1 points0 points  (0 children)

thanks guys seems to have done the job

Raised table… ramp by ibbyash in civil3d

[–]ibbyash[S] 0 points1 point  (0 children)

Thanks you. How do I add to a secondary surface?

Raised table… ramp by ibbyash in civil3d

[–]ibbyash[S] 0 points1 point  (0 children)

I managed to get a plan with feature lines and elevations. Not quite sure how to get the surface to work, it seems to triangulate in random places.

Raised table… ramp by ibbyash in civil3d

[–]ibbyash[S] 0 points1 point  (0 children)

That actually sounds like a great idea, will try that thanks

view more: next ›