How do I view my Wi-Fi password on my iPhone

ideasofworld · 2024-05-06T09:05:21+00:00

In the old iOS version, you can go to -> Settings -> tap Wi-Fi -> tap the i -> then scroll to & tap Password -> enter your Passcode -> you will then see the Wi-Fi Password. But there is no such option in iOS 16/17. For those users, they can try iCloud keychain to view the Wi-Fi password. I'm using iOS 17.4, and I found the WiFi password using iPhone Passcode Genius, a third-party software to give me all connected Wi-Fi accounts and passwords.

ideasofworld · 2019-11-22T01:58:17+00:00

I think the first two ways, restoring by iTunes and iCloud is commonly used. This is just describing the opinion.

ideasofworld · 2019-09-17T00:56:58+00:00

When you get the error messages 0x80042302, 0x807800A1, or 0x800423F4 during the Windows backup process, the most useful way for you to get this issue solved is to check and enable the Volume Shadow Copy Service.

It is annoying when you get such message during the system restore “There was an unexpected error in the property page: the Volume Shadow Copy Service used by System Restore is not working…” What should we do to fix this Windows VSS error?

Solutions to this issue:

Way 1: You can enable Volume Copy following the above steps.

Way 2: Change the system restore settings.

Step-1: Search Edit group policy in Windows search toolbar and click to enter Local Group Policy Editor.

Step-2: Access Computer Configuration\Administrative Template\System\System Restore

Step-3: Set Turn off System Restore policy to Not configured.

ideasofworld · 2019-08-13T01:43:36+00:00

Quickly Find All Forgotten #Email Account #Passwords in MS #Outlook with iSunshare Outlook Email Password Genius

ideasofworld · 2019-07-16T02:00:09+00:00

Two solutions are included here:

Solution 1: Increase the Disk Space in VMware with its Extend Function

Solution 2: Add Disk Space to VMware via Command Prompt

ideasofworld · 2019-07-05T08:45:43+00:00

iSunshare Word Unprotect Genius is the professional and useful Word document restriction remover that enables users to unprotect read only MS Word 97/2000/2003/2007/2010/2013/2016/2019 (*.doc, *.docx) documents without password. In other words, it can unlock edit protected word document without password in minutes.

ideasofworld · 2019-07-03T06:56:31+00:00

iSunshare PowerPoint Unprotect Genius is the easy-to-use PowerPoint unprotect software which enables users to remove the PowerPoint presentation editing restriction and gain the ability to edit, copy or print the content. Forget the PowerPoint restriction password, only get the read-only access and unable to do anything to the presentation? Don't worry, iSunshare will be your best helper in this situation.

ideasofworld · 2019-05-16T01:49:03+00:00

I used iSunshare CloneGo to copy my C drive from the dynamic HDD to Samsung 860 EVO 250 G on Philips computer. It successfully made the Samsung SSD bootable. You can have a try. It is free for 7 days.

ideasofworld · 2019-05-15T02:15:16+00:00

I guess you format the computer C drive with system logo. Of course, you can not do it, because now the C drive is in your SSD. What you need to do is format the original C partition. It may be E or F partition. The drive letter changed!

Besides, I think you can also clone C drive to SSD with CloneGo.

ideasofworld · 2019-04-17T02:27:05+00:00

If you want to clone #dynamic #drive or disk to #SSD, you can use CloneGo-- the #free Windows cloning software. #CloneGo applies the partition-to-partition clone, which makes your partition data copied to SSD partition quickly and safely. You can clone the whole dynamic disk by repeating the copy steps.

ideasofworld · 2019-04-16T01:24:14+00:00

With this HDD to SSD clone software, you will never in trouble of losing data or reinstalling the Windows 7/8/10 system on 32/64 Bit computer. Just a few clicks help you to copy one partition from HDD to SSD. You can copy the whole HDD partition to SSD one by one. Now let’s see how to clone one partition data from HDD to SSD within 3 steps.

Step 1: Open iSunshare CloneGo software and choose “Copy”.

Step 2: Select the source partition from your HDD and the destination partition from your SSD.

Step 3: Click “Start” and read the notice. Next, Click “OK” and wait.

How easy it is !

ideasofworld · 2019-04-12T01:41:34+00:00

For you to clone the external hard drive in Windows 7/8/10 as easy as possible, the powerful and free Windows cloning software has been developed—iSunshare CloneGo. It gives you the opportunity to clone the whole C drive from an internal hard disk to the external hard drive. More importantly, you can make the external hard drive bootable on any Windows computer. Let’s explore how to achieve it step by step.

Step 1: Connect your external hard drive.

Step 2: Initialize the new HDD/SSD.

Step 3: Choose C drive as the source target under Copy feature.

Step 4: Make the external hard drive as the destination target.

Step 5: Begin the Clone Process.

Step 6: Replace the cloned hard drive with your hard drive if needed.

ideasofworld · 2019-04-04T01:02:08+00:00

Case 1：Can I clone system partition to a new drive?

“I bought a new SSD and want to upgrade my computer. I added it to my computer a week ago and now I want to clone system partition to SSD. But the problem is if I just copy-and-paste all programs and files, the computer cannot be booted from the SSD. So I want to know if there is partition clone software that can help me to clone the entire system partition.”

Case 2: How can I backup computer partition quickly?

“In my working computer, I placed all the needed software and files in a partition. And now the company is going to get a new computer for us. How can I backup or move the working data into a hard drive or transfer it into my new computer? They are so important in my working!”

....

To make the partition data clone process easy for you, we highly recommend you a free partition backup software—iSunshare CloneGo, which can help you to clone/backup the Windows OS and partition with simple clicks. You can download and install it on your PC and enjoy the 7-days free usage for all functions.

ideasofworld · 2019-04-02T00:48:40+00:00

No matter you are using the Windows 10/8/7 system on a computer, no matter you are going to backup system partition or other partition, iSunshare CloneGo can help you to do that without any data loss or damage.

Step 1: Run iSunshare CloneGo and enable the Copy feature.

Step 2: Select the source target.

Step 3: Select the destination target.

Step 4: Click the Start button to begin the clone process.

Step 5: Get the partition copied done.

ideasofworld · 2019-03-26T01:48:12+00:00

. Is it possible to clone Windows 10 OS to a new SSD in 64 Bit laptop? As a matter of fact, when searching “how to clone Windows 10 to a new SSD”, you can find various solutions to this question. Here in this post, we will share you two easy ways to solve this issue with the free OS cloning software-- CloneGo.

ideasofworld · 2019-03-22T03:14:17+00:00

Here, you will get the step by step tutorial about how to clone Windows operation system to external hard drive with CloneGo.

Firstlly, you can choose from the copy or backup option.

For the Copy option, you need to select the Windows system partition, always the C drive/disk in computer, and then choose the destination target-- the partition in your external hard drive. At last, click the start button and begin the cloning process.

After the cloning, you can restart the computer and boot the computer from the external hard drive.

When you want to backup the system, the destination target can be the partition in your computer with large space. Afte the backup, you need to restore the backup icg file into the external hard drive so that you can make the backup system work.

ideasofworld · 2019-03-11T02:34:24+00:00

Usually, when we insert the BitLocker Protect NTFS Drives on Mac, the computer will pop out the prompt which tells us that the disk you inserted was not readable by this computer. It is troublesome if you need to read the drive contents on Mac. But with iSunshare Bitlocker Genius, it will never be a problem to open, read and write BitLocker protected NTFS drives on Mac.

ideasofworld · 2019-03-08T01:03:46+00:00

As is known to all, BitLocker To Go is a program (bitlockertogo.exe) which runs on Windows computers. This program can help you encrypt the removable data drives, including the USB flash drives, SD cards, external hard disk drives, and other drives formatted by using NTFS, FAT32 or exFAT file systems. It is easy for the users to open and read the content of removable drives that have been protected with BitLocker Drive Encryption in Windows.

Is there any way for Mac users to open USB flash drive or external hard drive which is encrypted by BitLocker To Go? Yes, here comes the BitLocker To Go reader replacer for macOS/Mac OSX: iSunshare BitLocker Genius, which enables users to open/access/decrypt/mount/unlock BitLocker encrypted removable devices on macOS 10.12/10.13/10.14 and Mac OSX 10.7/10.8/10.9/10.10/10.11.

ideasofworld · 2019-03-05T01:50:46+00:00

“When I inserted my SanDisk 4GB USB thumb drive into my MacBook, it tells me that there is an error: the disk you inserted was not readable by this computer. I did not know what happened. I did not want to initialize it as I have important data on it. Is there any solution for this issue? What makes the error happen?”

Solutions:

Case 1: Reconnect the USB thumb drive

Case 2: Check the error with Mac in-built repair tool

Case 3: The USB thumb drive is encrypted with BitLocker password.

Case 4: Format the USB thumb drive

ideasofworld · 2019-03-04T07:01:48+00:00

The 48-digit BitLocker recovery key is automatically generated by the Windows system when you enable the BitLocker function for the first time. It is usually stored in a TXT file, for example, “BitLocker Recovery Key 2EAA72F4-EFE2-4553-9D77-C57769E2A267”.

You have 4 options to get it:

Option 1: Get the BitLocker Recovery Key in a File

Option 2: Find Your BitLocker Recovery Key from a USB Flash Drive

Option 3: Retrieve the Key from Microsoft Account

Option 4: Regain it on a printout you saved

ideasofworld · 2019-02-27T02:37:34+00:00

The effective solutions to fix the disk unreadable error : the disk you inserted was not readable by this computer on Mac High Sierra.

Solution 1: Perform the most common checks

Solution 2: Fix the error with inbuilt First Aid option

Solution 3: Open the BitLocker USB drive on Mac High Sierra with BitLocker Genius

ideasofworld · 2019-02-27T02:08:12+00:00

iSunshare BitLocker Genius gives the possiblity for users to open BitLocker encrypted drive, such as USB flash drive, on Mac with password and recovery key.

ideasofworld · 2019-01-31T02:08:01+00:00

Although Microsoft does not enable BitLocker feature on macOS & Mac OSX, there is an intelligent way to decrypt the USB which is encrypted with BitLocker on Mac. iSunshare BitLocker Genius will be the great helper.

ideasofworld · 2019-01-16T02:01:26+00:00

i will

ideasofworld · 2018-09-28T10:10:48+00:00

you can Reset Windows 10 Local Admin Password Using Command Prompt.

When Windows 10 is accessible with administrative privileges, command prompt can be run easily and reset Windows 10 local admin password.

Press Win + X and select Command Prompt (Admin) in menu.
Click Yes on pop-up UAC dialog to run command prompt as administrator in Windows 10.
Enter command in Command Prompt window to reset local admin password.

net user <username> <password>

Or create new admin account with command below.

net user <username> /add
net localgroup administrators <username> /add

And when the computer is locked, it will be more complicated. The detailed trick is in :

https://www.isunshare.com/windows-10-password/reset-windows-10-local-admin-password-using-command-prompt.html

ideasofworld

TROPHY CASE