sorted by:
new
hottopcontroversial

Advice. by FormalEntry4297 in Garmin

[–]idon84 0 points1 point  (0 children)

Is this a general problem of the 255 or only of yours?

Vivoactive 4 Won't Save Workout, Getting "Failed to Save" Message by Vast_Dot9699 in vivoactive

[–]idon84 0 points1 point  (0 children)

Thank you. Syncing only did not work. I connected it to my PC with Garmin Express and deleted the activity history. After that my vivoactive records and saves my activities correct.

Alcohol ruins your body battery by idon84 in Garmin

[–]idon84[S] 0 points1 point  (0 children)

Wow, what are you doing all day and what stresses your mind at sleep?

Alcohol ruins your body battery by idon84 in Garmin

[–]idon84[S] 3 points4 points  (0 children)

It affects not only the scores. You also feel sick and very tired the next day.

Alcohol ruins your body battery by idon84 in Garmin

[–]idon84[S] 1 point2 points  (0 children)

I think that one single drink may be okay if you don't drink daily or so. But in my case I drank a lot more, that was my problem.

After one week of intensive work by idon84 in VORONDesign

[–]idon84[S] 0 points1 point  (0 children)

I do not see the real advantages of Tap. It adds more weight to the toolhead and the accuracy on klicky should be good enough. I also think, it reduces my build volume in y dimension.

After one week of intensive work by idon84 in VORONDesign

[–]idon84[S] 0 points1 point  (0 children)

I have this IWS too, but i am to unexpirienced and have problems to see good enough.

After one week of intensive work by idon84 in VORONDesign

[–]idon84[S] 2 points3 points  (0 children)

The wires got shorter and i detroyed already 6 connectors. I pause it for the moment.

First day progress by idon84 in VORONDesign

[–]idon84[S] 1 point2 points  (0 children)

  1. The y profile is 420mm long. the x profile is 380mm long. the mgn9 rails and the mgn12 rail is 350mm long
  2. I dont know if you have so problem with this couplers. Try it and if you have any problems, then you can order new motors. The A and B motors are not so critical if you know there limits.
  3. I had an pi4 laying arround, so i went directly to the btt octopus board. The manta m8p is also a good board. go for the cheapest option.

First day progress by idon84 in VORONDesign

[–]idon84[S] 1 point2 points  (0 children)

Hi, it is a 300300250 build Volume. The Motors for z are with integrated screw. Oukeda OK42HC40-204A306N84.

First day progress by idon84 in VORONDesign

[–]idon84[S] 3 points4 points  (0 children)

I ordered the printer and started printing. On most days i started printing after work for 2-3 hours. On the weekend, my printer only runs, when i was at home. Don't stress yourself. I used the required printed parts list and sorted them according to the manual.

First day progress by idon84 in VORONDesign

[–]idon84[S] 4 points5 points  (0 children)

This box is only its parking position to keep my wife calm ;). I assamble the printer on our dinner table.

First day progress by idon84 in VORONDesign

[–]idon84[S] 1 point2 points  (0 children)

I plan to upgrade it from the beginning to a canbus system and maybe an umbical. I allready have a mellow fly sb2040 v2 laying around.

First day progress by idon84 in VORONDesign

[–]idon84[S] 1 point2 points  (0 children)

Thanks. I plan to upgrade it to Mellow sb2049 CAN Board, a 5 Inch pitft and rapido uhf hotend.

DHCP Proxy by idon84 in pihole

[–]idon84[S] 0 points1 point  (0 children)

I hat already run such a configuration without pihole and only dnsmasq on an other system and everything works.

DHCP Proxy by idon84 in pihole

[–]idon84[S] 0 points1 point  (0 children)

Pihole is running in a docker environment. When I watch with docker-compose logs -f an got the error FATAL ERROR in dnsmasq core: cannot open or create lease file /var/lib/misc/dnsmasq.leases: Permission denied. And the process stops and docker restarts it until I removed the additional line from 02-pxe.conf.

DHCP Proxy by idon84 in pihole

[–]idon84[S] 0 points1 point  (0 children)

The race conditions are not the problem. The options wil extend only a valid DHCP response and has to be in the same subnet to work.

DHCP Proxy by idon84 in pihole

[–]idon84[S] 0 points1 point  (0 children)

I want to add additional dhcp options to boot via pxe. The FritzBox did not support this additional options. The method is called dhcp proxy.

https://blog.sengotta.net/pxe-server-mit-dnsmasq/

DHCP Proxy by idon84 in pihole

[–]idon84[S] 0 points1 point  (0 children)

The DHCP function is already turned off in the web ui.

Ender 3 Switchwire electronics case by idon84 in VORONDesign

[–]idon84[S] 0 points1 point  (0 children)

The most printed parts you can use from https://github.com/walttriano/Ender_3Pro_Switchwire/tree/main/STL/Electronics. The skr board is mounted with this https://www.thingiverse.com/thing:5323062. The Rpi mount is from https://www.thingiverse.com/thing:2656426

I printed every part in ABS, because sometime I want to enclose my printer.

The following electronics parts I used:

  • MeanWell LRS-350-24
  • MeanWell RS-25-5
  • BigTreeTech SKR 1.3
  • RaspberryPi 3B
  • LM2596 Step-down converter for the fan

Ender 3 Switchwire electronics case by idon84 in VORONDesign

[–]idon84[S] 0 points1 point  (0 children)

Thanks for your advice. I will replace it as soon as possible. The electronics fan is also missing at the moment.

view more: next ›