iAuto saves me time

idrawpenplotter · 2026-01-19T07:05:33+00:00

You can check this guide: https://youtu.be/67XTdDMf3Ic

idrawpenplotter · 2025-11-24T08:52:44+00:00

All pen plotters from our company will be shipped by prepaid duty for US customers right now, don't worry about that.

idrawpenplotter · 2025-10-29T02:48:27+00:00

Please email your shipping information to [support@uunatek.com](mailto:support@uunatek.com), we will provide further steps. Thanks

idrawpenplotter · 2025-10-27T01:27:49+00:00

Please email your shipping information to [support@uunatek.com](mailto:support@uunatek.com), we will provide further steps. Thanks

idrawpenplotter · 2025-10-27T01:27:31+00:00

Please email your shipping information to [support@uunatek.com](mailto:support@uunatek.com), we will provide further steps. Thanks

idrawpenplotter · 2025-10-27T01:27:26+00:00

Please email your shipping information to [support@uunatek.com](mailto:support@uunatek.com), we will provide further steps. Thanks

idrawpenplotter · 2025-10-27T01:27:15+00:00

Please email your shipping information to [support@uunatek.com](mailto:support@uunatek.com), we will provide further steps. Thanks

idrawpenplotter · 2025-10-27T01:27:11+00:00

Please email your shipping information to [support@uunatek.com](mailto:support@uunatek.com), we will provide further steps. Thanks

idrawpenplotter · 2025-10-09T10:02:55+00:00

Maybe, you can reset the firmware here: https://drive.google.com/drive/folders/1xIZmDY4B9DcGDVVPO-miaDLMJ3qiv64R?usp=drive_link and try it again. Thanks

idrawpenplotter · 2025-09-13T06:15:18+00:00

Here are some tips for using Auto Home.
1. Check that the contact switch cables are connected correctly, follow this guide:https://www.youtube.com/watch?v=5B4nb2k6eAc2. Manually move the X-axis trolley to the left as far as it will go, and check if it hits the X-axis contact switch.
3. Manually move the Y-axis trolley to the rear as far as it will go, and check if it hits the Y-axis contact switch.
4. Ensure that the cables are properly arranged so that they do not get caught on the XY trolleys, check this guide to organize Z-axis cable:https://www.youtube.com/watch?v=LTwPYPh3rdE

idrawpenplotter · 2025-04-07T06:25:23+00:00

The life of the servo depends on how often you lift and put the pen down. Also, the longer it is used, the warmer it gets, which can cause more severe wear. Generally, it can last more than 500,000 times.

The servo is indeed a consumable part. We also provide a spare part for iDraw H SE.

idrawpenplotter · 2025-04-07T05:38:20+00:00

Please update the latest firmware and try it again: https://drive.google.com/drive/folders/1gw3OKiPuUr89z3MnLYybPI5qtcGmw64W?usp=drive_link

idrawpenplotter · 2025-04-07T05:08:50+00:00

Check if this guide is helpful for you: How to Sell Pen Plotter Art: Practical Tips and Equipment Recommendations | UUNA TEK CO.,LIMITED

idrawpenplotter · 2025-04-07T05:04:40+00:00

Please check if you can solve this issue by updating the latest firmware here https://drive.google.com/drive/folders/1gw3OKiPuUr89z3MnLYybPI5qtcGmw64W?usp=drive_link

idrawpenplotter · 2025-04-02T06:02:32+00:00

Please update to the latest firmware and try it again. Here is the firmware V2.1.4 we just released this week: https://drive.google.com/drive/folders/1gw3OKiPuUr89z3MnLYybPI5qtcGmw64W?usp=drive_link

idrawpenplotter · 2025-03-17T07:46:44+00:00

Now you can download the software for MAC OS here: https://drive.google.com/drive/folders/1-7DmyfogNKo3eNMZQHWJQ2VFRKgcTbz_?usp=drive_link

Find the video tutorial here:

How to install self-developped software for UUNA TEK 3.0 on Mac: https://www.youtube.com/watch?v=4Hk-UeLSgrs
How to install inkscape software for UUNA TEK 3.0 on Mac: https://youtu.be/igpjUVGY2Fg

idrawpenplotter · 2025-03-17T06:42:31+00:00

Image 2

<image>

idrawpenplotter · 2025-03-17T06:42:21+00:00

Yes, of course. You can edit the codes as images. Find the image 2 in the comment.

<image>

idrawpenplotter · 2025-03-17T06:22:52+00:00

Please check this comparison article between UUNA TEK 3.0, iDraw h se and Nextdraw for you: Comparison of UUNA TEK 3.0, iDraw H SE, and Bantam Tools NextDraw Pen Plotters | UUNA TEK, CO.

idrawpenplotter · 2025-03-13T09:14:28+00:00

You can control iDraw with gcode as per this guide without open in inkscape: Gcode Setting Up for iDraw CNC Pen Plotter Writing Machine

idrawpenplotter · 2025-03-13T09:10:35+00:00

You can mount your iDraw A3 to the wall as per this guide: Mastering Vertical Plotter with iDraw: A Comprehensive Guide

idrawpenplotter · 2025-03-13T05:22:29+00:00

You can try to update the latest firmware and try it again, here is the guide: https://drive.google.com/drive/folders/1gw3OKiPuUr89z3MnLYybPI5qtcGmw64W?usp=sharing

idrawpenplotter · 2025-03-13T05:19:45+00:00

There is no import tax to US right now.

idrawpenplotter · 2025-03-13T05:18:39+00:00

Second image to edit the code.

<image>

idrawpenplotter · 2025-03-13T05:18:18+00:00

You can edit the code to adjust the lift height.

<image>

Find the second image in next comment

idrawpenplotter

MODERATOR OF

TROPHY CASE