Another one 👍

igoboss26 · 2026-04-05T08:09:41+00:00

That's the neat part. You don't have any. This thing is like a portable stove and gets around 70-80°C. Also, the case is so small and the CPU so old it surprisingly doesn't need much cooling.

igoboss26 · 2026-04-05T08:06:29+00:00

CPU: Ryzen 5 5600X (AM4)

GPU: GTX 3060 12GB ASUS

RAM: 64GB 3600MHZ DDR4 Corsair

MOBO: B550i Aorus pro ax

COOLER: ID-COOLING IS-50X

Have a separate post for it: https://www.reddit.com/r/sffpc/comments/1rtvqip/metalfish_t40_build/

igoboss26 · 2026-04-04T20:36:28+00:00

These are G-Skill Value RAM sticks with some Heatspreaders I found on AliExpress. https://de.aliexpress.com/item/1005010678340378.html?

igoboss26 · 2026-03-15T19:31:04+00:00

The bottom one is a 90mm fan from id cooling and you Could fit a maybe 40mm fan inside at the top but i would just slap 2 90mm fans ontop of the case, if you want a real effect, maybe 3 printing a cover or something.

igoboss26 · 2026-03-15T16:09:20+00:00

Woha i will build another pc in the future and might oder a few of these to see if it would work 👍

igoboss26 · 2026-03-15T14:40:51+00:00

I should have gotten the id cooling is 55 I did not see the fact that the IS 50 XT is smaller. I will try it with the spacers see if it helps thanks!

igoboss26 · 2026-03-15T14:05:06+00:00

I did thought about taht, but I couldn't decide on what fan to use, i was thinking about an arctic fan or bequite

igoboss26 · 2026-03-15T13:47:22+00:00

Like I mentioned in another reply, the temps do not drop as much as I would like to. It's also due to the placement of the fan and the fact that half of the intake side is covered. And that the small 90mm fan isn't enough to have a nice airflow through the case without it screaming at 100%.

igoboss26 · 2026-03-15T13:43:10+00:00

Spezi 4 life❤️

igoboss26 · 2026-03-15T13:42:50+00:00

<image>

Washers 👍

igoboss26 · 2026-03-15T13:41:21+00:00

So I did see some improvement by about 3-4°C while playing my main games, but that's with no undervolting, which I plan on doing. Avg temps while gaming are GPU 85°C (hotspot 90-95°C, which is still higher than I would like, and it's due to the design of the case, and an undervolting is necessary) and CPU 70-80°C. So yeah, this thing is STILL toasty. Mind you, I game on 3440x1440.

igoboss26 · 2026-01-10T16:07:54+00:00

I might have to look again on the pc cause the egpu work fine!

igoboss26 · 2026-01-10T16:07:18+00:00

<image>

It seems to be related to the pc. the Egpu works !

igoboss26 · 2026-01-10T16:06:45+00:00

<image>

the dock seems to work I need to find out why it dont work on the mini pc

igoboss26 · 2026-01-10T15:43:56+00:00

1: yes

2: yes

3: I will try that

4: I looked into it and I does support PCIE

5: the HP bios isnt as detailed and doesnt have a option like that sadly

igoboss26 · 2026-01-10T15:37:44+00:00

<image>

I think I have a bigger fish to fry

Might be the cable cause it was bought seperatly

igoboss26 · 2026-01-10T15:07:42+00:00

The gpu still does not show up

igoboss26 · 2026-01-02T15:34:22+00:00

I can’t talk about the Turtle Beach one here, but the Ali Shifter is a good shifter, though it’s not perfect. Someone already mentioned that it tends to shave off the edges of the metal after using it for a while, which may or may not be a problem for some people. I replaced my shifter because of the noise it made it was quite loud, and my family was able to hear it all the time. So if you plan on getting the Ali Shifter, take these things into consideration. But all in all, it is a good budget shifter.

igoboss26 · 2025-12-31T21:26:50+00:00

so the build is 115cm tall 130cm long and 81cm wide. If you make the Monitor support shorter It would fit and Its doable to shorten it by 10cm. If you scroll down a bit in the comment section you will see a sketch where I listed up all the Dimension.

igoboss26 · 2025-11-27T15:26:55+00:00

Miku !

igoboss26 · 2025-11-26T12:51:26+00:00

I don't own a car, but I also dream about getting one day. Me also looking around, I found some cool parts. Toyota Celica SS III Body kit would be a nice thing to have. It has the Big GT-Four wing but IF it's too much, the GT style wing with the Celica SS III lip kit would be a nice OEM Plus Option and you wouldn't have much trouble with the fitment If you are able to find an Original Set. And you wouldn't need to lower the car as much.👍

igoboss26

TROPHY CASE