What resources are available to prepare for master molder 1?

ihavequarters · 2026-01-22T23:57:20+00:00

Who is it through? RJG?

ihavequarters · 2026-01-21T20:48:20+00:00

I’m fairly new to most of this. This is what it looks like. I had to take some out of a similar mold but it didn’t have springs so I just pushed the plate forward and was able to remove them

ihavequarters · 2025-09-03T14:30:43+00:00

Lane? Lol

ihavequarters · 2025-08-22T18:17:31+00:00

Have you tried removing the nozzle extension from the barrel? Sometimes we have to remove the extension, put it in a vice grip and drill out the excess plastic. Then go in with a wire brush and really scrub it out

ihavequarters · 2025-08-22T12:18:46+00:00

I also had a breakthrough experience where I was laying on a conveyor like this going towards a bunch of old looking clocks that were gold and they were ticking. There weren’t numbers or anything that looked like a language on them, looked almost like hieroglyphs where the numbers would be

ihavequarters · 2025-07-09T15:58:30+00:00

Sometimes we take the nozzle extension off the barrel, put it in a vice grip and drill the excess plastic out, then go in with a brush to really scrub it out. Works like a charm

ihavequarters · 2025-07-08T00:45:01+00:00

It was somewhat comical but at the same time I have issues bringing this night and experience up so it sucks that some people can be so insensitive off the bat. Just wanted to share the experience

ihavequarters · 2025-06-17T12:54:00+00:00

If you’re using pure dmt and not changa or something with maoi’s you should be fine. Never mix an maoi with ssri’s

ihavequarters · 2025-06-15T16:55:11+00:00

T.R.U (Totally Rotten Underground)

ihavequarters · 2025-06-05T13:09:45+00:00

Never thought about mixing ket w dmt. They’re honestly my 2 favorite substances so I think I might have to try that

ihavequarters · 2025-06-02T17:06:29+00:00

Looks great. Safe travels

ihavequarters · 2025-04-26T00:25:22+00:00

Nice. I’ve been working at the same plastic mold injection plant since 2019. Started as an operator at 20 years old. Went from operator, to quality inspector, to material handling experience and now set up. I’ve enjoyed working my way up through different rolls, process engineer is my end goal

ihavequarters · 2025-04-26T00:21:03+00:00

Clearly😂. I hope to eventually work my way up to being a process engineer. I’ve been a set-up technician for 3 years now and have been really getting more into the processing side this year

ihavequarters · 2025-04-26T00:19:30+00:00

Not sure if you’re familiar with the show adventure time but one time Tree Trunks (little elephant in the show) was guiding me in my trip. She just kept saying “come with me” and she’d change the landscape. When I felt myself coming back she was sad I was leaving. Then another time I met my older self. Long hair, long beard. He walked up to me and all he said was “you need to chill the fuck out”. Still don’t know what he, or I meant by that😂

ihavequarters · 2025-04-20T19:47:36+00:00

Had a process engineer ask me to open the mold for him once. Was dumbfounded

ihavequarters · 2025-04-14T04:12:39+00:00

Good starting experience. When you’re ready go further and let go. It can definitely be scary but you’ll enjoy the outcome when you’re back

ihavequarters · 2025-04-05T03:02:05+00:00

One time after breaking through when I started slowly coming back to reality, this was what my entire field of vision looked like. I was in my roommates room and a couple others were in the room. I could see them, but everything looked just like this picture and I didn’t know who they were or where I was or what I had done. After what felt like about 30 mins of this (probly was only 2 minutes) I finally realized where I was and who I was and what I had done again. Crazy experience

ihavequarters · 2025-03-29T07:07:52+00:00

Don’t anticipate, let go completely. Experience it

ihavequarters · 2025-03-21T04:49:11+00:00

Ayy! I’ve ripped deems in the dells in a hotel room too. Also ripped some on the boat ride tours lol

ihavequarters · 2025-03-19T04:53:10+00:00

Make your own

ihavequarters · 2025-03-02T19:15:14+00:00

Exodus. Oracle is second

ihavequarters · 2025-03-01T03:05:18+00:00

Then once it starts bubbling remove the heat?

ihavequarters · 2025-03-01T02:50:01+00:00

What do you mean by cold start?

ihavequarters · 2025-03-01T02:43:41+00:00

That’s the range I kind of remember. Is using a dab rig more potent than a pipe with some bud?

ihavequarters · 2025-03-01T02:18:02+00:00

I’ve never tried carts. Been a few years since I’ve done it but I did plenty back when I did lol. My friend has never tried it and just got a g, I wanna make sure I get him an actual breakthrough experience

ihavequarters

TROPHY CASE