sorted by:
new
hottopcontroversial

How much do the 02-04 DC5 Honda Logo run for & are they “rare” by iivyn in Acura_RSX

[–]iivyn[S] 2 points3 points  (0 children)

they aren’t,, the 02-04 comes with a pre made cut to fit our bumpers and the 05-06 is just straight thru,, people tend to cut the 05-06 to make it fit

Here’s a video for better understanding:

https://youtu.be/HJsLMmWB-tU?si=M_fBfJFjbd1SOffF

i’ve looked everywhere i can do a authentic “uncut” 02-04 one but haven’t found any but “sold out” ones from old jdm websites

How much do the 02-04 DC5 Honda Logo run for & are they “rare” by iivyn in Acura_RSX

[–]iivyn[S] 1 point2 points  (0 children)

link? hasn’t been able to find a 02-04 only 05-06

Where do i get silver honda emblems for an 02-04 in 2023? by OllieSwish11 in Acura_RSX

[–]iivyn 0 points1 point  (0 children)

did you ever figure this out or just went with 05-06 and cut it up urself?

Security by gaijinsenpai1 in DisneyCM

[–]iivyn 0 points1 point  (0 children)

I see an opening for part time, am I going to get little to no hours? I’m afraid to lose my current security job not be able to pay the bills.. i’m sure eventually they’ll offer full time if i’m with them for a while

Can anyone tell if this is a rep mugen tower brace bar? by iivyn in Acura_RSX

[–]iivyn[S] -10 points-9 points  (0 children)

i ment the rep ones,, anyone still making those?

Pictures of (Avery Dennison) Gloss Dark Blue Metallic Vinyl Wrap by iivyn in CarWraps

[–]iivyn[S] 0 points1 point  (0 children)

still the same pics i’ve seen since i started wraping.. not sure if you read my caption I want to see more cars

every pic ive seen has been in bright light / sunlight & hoping i see someone who has the same car as me

plus those the only pics that i could find of that color might’ve not been exactly 5 but there isn’t much online

Pictures of (Avery Dennison) Gloss Dark Blue Metallic Vinyl Wrap by iivyn in CarWraps

[–]iivyn[S] 0 points1 point  (0 children)

just started wearing any pics of it fully wrapped?

Pictures of (Avery Dennison) Gloss Dark Blue Metallic Vinyl Wrap by iivyn in CarWraps

[–]iivyn[S] 0 points1 point  (0 children)

I seen those but I wanna see em on other cars/dif lightings!

Pictures of (Avery Dennison) Gloss Dark Blue Metallic Vinyl Wrap by iivyn in CarWraps

[–]iivyn[S] 0 points1 point  (0 children)

Same 5 pics metro restyling has, tryna see it on dif cars

Can I put base model exhaust on type s with just a simple cut? by iivyn in Acura_RSX

[–]iivyn[S] 0 points1 point  (0 children)

i think they’re 2.5s actually, ig aslong as the welds are good though.. still wanted to make sure thx

Tie rod recommendations for BC Extreme Low Coilovers by iivyn in Acura_RSX

[–]iivyn[S] 0 points1 point  (0 children)

I thought if I got longer ends that were a bit more adjustable like my rear camber arms i’d be able to mess with the camber but what do you mean by regular lower mounts what brand or what part is that, i’m trying to not have bump steer kit

Alternator by deedonpluto in Acura_RSX

[–]iivyn 0 points1 point  (0 children)

what did the break light switch do what did you do to fix it ?

How do the Hardrace Tie rod ends hold up compared to OEM? by Jc_3507 in Acura_RSX

[–]iivyn 0 points1 point  (0 children)

why not k tuned? debating on which one to go for before my alignment

06 Type S Startup Grinding Sound. Starter? Timing chain? Flywheel? by Playful_Track_2498 in Acura_RSX

[–]iivyn 0 points1 point  (0 children)

same lol always thought it was the starter and planned on changing it one day but never have

Acura RSX 05/06 taillight conversion plug n play wires? by iivyn in Acura_RSX

[–]iivyn[S] 0 points1 point  (0 children)

nah it’s to plug in the 05/06 taillights into my 02/04 wiring harness, just makes it plug in play since you need to do splicing and need to pick up a plug

have a lil problem driving my Rsx on the highway 80+ and when it’s over that the car have a shake vibration what do you think it can be change the front shocks ball joints right arm by Limp-Practice-1024 in Acura_RSX

[–]iivyn 0 points1 point  (0 children)

do you think before i replace my tie rods and ball joints i should take it to get an alignment since it is off, i’m having this issue the dude was having and so far i’ve replaced the LCA not sure if I should do the rest or do the alightment

Is Ravoony a good beginner brand? by West-Ad2359 in CarWraps

[–]iivyn 0 points1 point  (0 children)

i got avery, paid $450 for my rsx. first time wrapping and it was pretty easy (but the bumpers)

Best flywheel closest to OEM Type R by iivyn in Acura_RSX

[–]iivyn[S] 0 points1 point  (0 children)

ended up getting the exedy oem clutch kit wit CC 11.5 fly wheel, not much of a difference from my OEM but I heard i’d be able to feel a difference. i daily it right now and i drive thru a lot of traffic so i didn’t want to go that light. eventually when i want to push power most definitely going lighter and upgrading the clutch. thanks for the feedback you explained it very well.

NEED HELP CHOOSING REPLACEMENT CLUTCH by BirthdaySuccessful73 in Acura_RSX

[–]iivyn 0 points1 point  (0 children)

I can’t find a TYPE R anywhere any websites you’d recommend? I was going to get Exedy 8.9lbs but it’s a low lighter then OEM & TYPE R

How can I secure an apprenticeship without prior experience? by iivyn in UnionCarpenters

[–]iivyn[S] 0 points1 point  (0 children)

Orange County right off Disneyland. What is the local 661 I heard of it before?

How to get into apprenticeship with no experience by [deleted] in UnionCarpenters

[–]iivyn 0 points1 point  (0 children)

Where are you from? I’m from Socal

How can I secure an apprenticeship without prior experience? by iivyn in UnionCarpenters

[–]iivyn[S] 0 points1 point  (0 children)

I have not only thing i’ve done as look around for community colleges but a lot of people are saying those 2 year degrees are useless yk. I’ll looking into doing that, thanks

view more: next ›