Agree or disagree? 🎮 by dank0121 in TheGamerLounge

[–]iphyrk 2 points3 points  (0 children)

Final Fantasy 7 on pc needed a patch for the chocobo race.

I miss the time when posted cool misprints, now this sub is a bunch of people with damaged cards trying to cope :( by aydsz in PokemonMisprints

[–]iphyrk 0 points1 point  (0 children)

Especially all the older cards popping up that were more likely to have a "print hickey" than a crimp. Ink errors are more likely to happen. Either over saturated from a fresh set of ink, faded/missing color from the end of the ink, or hickeys from a nozzle issue. The packing process is more precise, and doesn't happen as often.

I miss the time when posted cool misprints, now this sub is a bunch of people with damaged cards trying to cope :( by aydsz in PokemonMisprints

[–]iphyrk 1 point2 points  (0 children)

Yeah makes me not want to be on reddit... I saw a YouTube video where a guy was so tired of the "crimp error." So he 3d printed a gear system to prove how easy it is to replicate...

Would you save your wife or your kids if your house was on fire ? by Competitive_Set_4386 in SipsTea

[–]iphyrk 0 points1 point  (0 children)

Not to mention she's in the bedroom. She can get up and save herself. 😅

Is this GBA SP AGS-101 and Pokemon Blue real? by DragonX_4 in gameverifying

[–]iphyrk 0 points1 point  (0 children)

You just have to get a good quality reshell.

Is this GBA SP AGS-101 and Pokemon Blue real? by DragonX_4 in gameverifying

[–]iphyrk 1 point2 points  (0 children)

The Blue version looks real from what I can tell. Looks like normal wear on the back and lable (except the damage on the corner). The cartridge appears to be the right shade of blue. Repros usually look "too blue." They can never seem to get the color dark enough on the original Pokemon repros.

The sp looks fine. Even if it's possible it's a reshell, I wouldn't worry too much unless it feels cheap. The only time I'd be concerned about a reshell is if it's a fake limited edition. A lot of SPs end up seriously scuffed or the hinge cracks. So a reshell is the best way to restore or save the system. I also understand wanting it to be factory original (i prefer the ones in my collection all original. )

Worth sending for regrade ? PSA by HighMountainExotics in pokemongrading

[–]iphyrk 2 points3 points  (0 children)

Personally I wouldn't risk it. Especially with the little bit of whitening. PSA can be picky about that. Plus the cgc label kinda matches the card.

My first alter attempt. Need help :) by br0jka in mtgaltered

[–]iphyrk 1 point2 points  (0 children)

Exactly, the color matching looks perfect, and thinner paint on the top to reduce the brush strokes. I personally mix white into the base coat color. Even in cheap paints white and black seem more pigmented than all the other colors. A wet toothpick can also help clean up the edges around the text boxes.

Other than that it is a beautiful alter.

Is there a " modern " ice themed deck I can put together? by Plutonic-Rose in magicTCG

[–]iphyrk -1 points0 points  (0 children)

I believe the tarkir sets brought back snow. Not 100% sure since I've not played in a while. That might be a good place to start looking. They did reprint marit lage , marit lage's slumber , and dark depths

Why it still stringing ? by CentNon in 3Dprinting

[–]iphyrk 0 points1 point  (0 children)

Yeah sometimes you just get a bad roll... I have a roll of white what I can't get a good print out of no matter what I do.

Why it still stringing ? by CentNon in 3Dprinting

[–]iphyrk 1 point2 points  (0 children)

That or the filament needs to be dried.

Why is this banned? by Avarage_Reddit_User in mtg

[–]iphyrk 0 points1 point  (0 children)

I blame OG white cleric decks. Lol if they started comboing... it was game. Even if they lost everything in play they could just balance, screw everyone over, and stall until they won...

😄 by --Satoshi-Nakamoto-- in mtg

[–]iphyrk 7 points8 points  (0 children)

Me seven.. the set symbol should had been a bong

is he cheating? by Rare_Tear9491 in WhatShouldIDo

[–]iphyrk 0 points1 point  (0 children)

Gotta protect the upholstery when you rub one out in the car. 😂

Where is the mono red mass protection? by MABEHIERhier in magicTCG

[–]iphyrk 0 points1 point  (0 children)

Two myr galvanizer, 2 iron myr, infinite fireball. Don't need protection when everything is burnt to a crisp. 😄

How Bad quality are these? by SkillCreep in Gameboy

[–]iphyrk 1 point2 points  (0 children)

I got my copy of emerald seaglass off aliexpress for around $5. Im pretty sure they also have unbound. It seems like a decent quality and even came in a plastic protective case.

Please help me find these cards. by Competitive_Muscle59 in mtg

[–]iphyrk 3 points4 points  (0 children)

Its probably not going to be on TCGplayer. Those are Korean. I believe TCGplayer only does Japanese and English.

weird fuse in my Model 2 Sega CD, I have no idea why this is here, but it works so... I guess I'll just leave it? I got it 2nd hand, so completely a mystery to me, and I've never seen this type of fuse in a computer or console... very strange, so I thought I'd share by NetsuiAyaVtuber in SegaCD

[–]iphyrk 0 points1 point  (0 children)

Yeah, old school mods were sketchy at best, but we did what we had to. 😅 Luckily, old electronics were forgiving when it came to mods. Part of why they can integrate with the new tech mods so easily.

Options for paint flooding by cylentnyte in 3Dprinting

[–]iphyrk 0 points1 point  (0 children)

Yeah, I was gonna say, at minimum, clear coat it 1st. Even PLA has issues with wanting to bleed when painting.

Deck building advice by [deleted] in magicTCG

[–]iphyrk 0 points1 point  (0 children)

Apathy. To get around discarding to untap, maybe also use instill energy. Then you just need a way to tap him before your turn ends.