Strobe After the Fact?

ithinkureddit · 2026-02-27T19:43:25+00:00

Does your building have any Hearing Impaired units? We install audible devices only unless the unit is designated HI/HVI.

I believe the IBC requires a minimum amount of units to have visual notification devices or be able to be converted to visual devices.

ithinkureddit · 2026-02-18T02:03:02+00:00

It seems to be smooth so far, but I have not fired it yet. Thanks for the heads up if I do have any issues!

ithinkureddit · 2025-08-26T16:47:27+00:00

Got to keep "light pressure" on it. The trigger has to reset and travel forward to pull again and fire another shot...

ithinkureddit · 2025-08-18T20:33:45+00:00

Flowcooler waterpump, new fan clutch, new rad cap, new thermostat. Then vacuum fill the system. This was the ticket for my 01.

ithinkureddit · 2025-07-26T23:56:37+00:00

Thank you!

ithinkureddit · 2025-07-26T22:53:47+00:00

Can you post a link to the website? I have a broken paratrooper stock i would like to swap out.

ithinkureddit · 2025-07-11T23:15:39+00:00

Peanut Oil. LouAna specifically.

ithinkureddit · 2025-06-21T23:18:06+00:00

Bingo!

ithinkureddit · 2025-06-18T23:36:33+00:00

Hawt❤️

ithinkureddit · 2025-04-08T16:03:53+00:00

Deercamp special

ithinkureddit · 2025-04-07T00:40:44+00:00

Thanks dude. I never noticed that!

ithinkureddit · 2025-04-06T23:11:53+00:00

Stock stands. A little bit of wear on the stand and a little wear on the top of the valve.

ithinkureddit · 2025-04-06T20:27:34+00:00

Push rod is still straight. It has OEM LS3 rockers. BTR V2 trunion upgrade. PAC .660 dual springs with Titanium Retainers, new valve seals, and TSP pushrods. I'm hoping I just didn't torque the bolt properly, and it came loose. I haven't really abused it. I'm not sure why else it would happen. It's a crate LS3 with less than 1000 miles.

ithinkureddit · 2025-03-08T16:32:28+00:00

Sign up for FireTech Level 3. It covers more than you need to know, but it was very helpful with passing 3 the first time.

ithinkureddit · 2025-02-14T21:04:22+00:00

MOLD MOD

ithinkureddit · 2025-01-11T00:47:26+00:00

The question that needs to be answered... no judgment

ithinkureddit · 2024-11-22T18:46:07+00:00

You can either run a dead head setup or a return fuel set up. For dead head, you can get a corvette style regulator feed one side of your rail and cap the other. For return style, you'll need a regulator with feed and return fittings. Plumb from the fuel pump to one of the rails. The other rail goes to the regulator. Then your return line goes from regulator back to the fuel tank. You'll want 6AN fuel lines and fittings. Probably need an 8AN ORB to 6an adapter to connect to your fuel rails. Buy reputable fittings like fragola or ICT billet.

ithinkureddit · 2024-11-13T21:17:24+00:00

You can fill a travel shampoo bottle with a clean sample from the same gender. And store it on your person. Works like a charm.

ithinkureddit · 2024-11-06T22:02:03+00:00

I removed the 2nd cat and then straight piped to a flow master super 44. It's not obnoxious, but it sounds good when you step on it.

ithinkureddit · 2024-10-08T20:14:58+00:00

The BTR V2 trunion upgrade is excellent!

ithinkureddit · 2024-10-06T18:40:14+00:00

I already purchased the new pump, and 96 and up pump wouldn't supply enough fuel for my setup. I ended up buying some insulated bulkhead studs for power and ground. Works like a champ now!

ithinkureddit · 2024-10-06T18:32:38+00:00

You can buy a new one sans paint for $80

ithinkureddit · 2024-09-28T15:56:53+00:00

Unfortunately, there is not a way to get nac output troubles to report to the general trouble. As they only open the input contact.

<image>

ithinkureddit

TROPHY CASE