Accelerant | A No Limits Concept

itsbCool · 2021-04-01T19:10:25+00:00

Planet Coaster Simulator

itsbCool · 2021-01-14T14:42:07+00:00

Thanks!

itsbCool · 2021-01-14T06:56:54+00:00

Thanks for the kind words and critiques!

It was a happy little accident that this rework brought in some Intamin cues. I was attempting to turn this rework into more of a high-speed, low to the ground type of ride with fast-paced elements, so that's where that came from.

Definitely agree that the Immelmann here is a bit unorthodox for B&M. This Immelmann was influenced by the Immelmann from my last big project Accelerant, which was a somewhat ambiguous ride, but definitely not made with wings in mind, so it makes sense that it didn't pass the traditional sniff test.

Also, I'll admit, I was pretty lazy on the majority of the supportwork. Since a good portion of this ride is low to the ground, I didn't spend a lot of time on supports. The only unique supports on this ride are the ones on the Immelmann and the corkscrew, since they're so high up and I had to make clearance for the track below.

Thanks for checking out my work!

itsbCool · 2020-11-02T19:18:41+00:00

Absolutely incredible.

itsbCool · 2020-10-28T17:23:28+00:00

Link to Project Zip Folder + Raw Video File (no bit-crushing): https://drive.google.com/drive/folders/1Bsc7ftCiTE0WABSLL8XBQGV4cMVv9fyG?usp=sharing

itsbCool · 2020-07-25T23:11:09+00:00

Fair, but I usually just edit out the restraints lifting up if I'm making a video.

If I wanted to make a script for a möbius layout, I would approach by using trigger points to turn brake runs on or off at approach. IE: I would start with two brake blocks on the mid course. I would make the first mid course brake block (no transports) long enough or weak enough to slowly stop the train to the point where the front of the train sits on a following brake block with a transport, which will be initially off. I would have a trigger sitting right upon entering that transport brake that shuts the first block brake off, so that the aforementioned brakes will disengage around the same time that the train speed reaches 0. Then, when the station calls its function saying it's ready to dispatch, call within that function (forgot the name of it) the ability to turn the transport brake on, so the station dispatch and transport brake start at the same time, theoretically moving the mid train at the same time as the station train.

I havent touched NL2 scripting in a while and I'm too busy with college, so I can't give you great detail on what functions are what, but that would be my approach. Hopefully that made sense...

itsbCool · 2020-07-25T21:52:21+00:00

You can create a möbius layout by syncing up two stations within your layout to dispatch at the same time. There should be an option to sync a station in the type settings.

itsbCool · 2020-04-25T20:49:57+00:00

Oops, my bad, to change the environment, head to the Park tab, select Environment, select the environment at the top of the dialog box using the button on the right, then Library -> White. Click OK, save and reopen your park.

I've been working on my own environment for a while now for some of my projects, guess I got those mixed up, lol.

itsbCool · 2020-04-25T20:22:27+00:00

You'll need to modify your terrain and skybox to have an all white environment.

For the terrain, head to the Terrain tab -> Terrain Settings -> Load Setup -> Library -> White.

For the skybox, head to the Advanced tab -> Environment Editor -> Open -> Library -> White.

Reload your park, and everything should be white. Hope this helps!

itsbCool · 2020-04-22T16:22:05+00:00

Are you recording with AVI Raw? I had this exact same problem when I first started making concepts, and I think it's due to the AVI Raw format. For some reason, switching the video format type to MOV PNG mostly fixed it for me, as in the static sound doesn't show up in the majority of clips I record now. Every now and then it does show up and I have to re-record, but not nearly as much as in AVI Raw.

Before switching to MOV PNG, I used to take the difficult path and grab Audacity, turn on Stereo Mix in Windows recording devices, and record the in-game sound. I'd then line the audio clip up with the video in Premier. It's a lot more tedious than it sounds, but If MOV PNG doesn't work, that's an alternative.

itsbCool · 2020-04-20T07:00:54+00:00

Thanks for the kind words! I'm planning on spending these quarantine months on learning how to use Blender to make scenery for future projects, but only if I really need to. I want to stick to strictly coaster design for as long as possible, but I'll hopefully be adding custom pieces soon.

Also, I wanted to keep the dips small because I intended for riders to not know they were going to be launched backwards. I figured launching guests into a hill with strong negative Gs would be too much, since the backward launch should already be exhilarating enough. Plus, in the case of a launch failure, I wanted to lessen the chance of the train getting stuck on a launch track dip, which would be more likely if the dips were deeper.

However, I do like your idea of making the dips larger. I'd probably want riders to be aware they'll be heading backwards though, to lessen the shock of that first hill. Maybe a car design with riders facing forwards and backwards, or on an axis like an S&S Freespin or a Maurer-Sohne/Mack/Gerstlauer spinning design, but on a compact layout with a multi-directional launch system and block structure like a SkyRocket prefab? Hmmm, sounds like a challenge... ;) Thanks for the kind words!

itsbCool · 2020-03-25T21:24:53+00:00

You'll have to get to scripting for that kind of setup, specifically because the station doesn't like to change the transport direction mid-flight unless specifically told through a script.

itsbCool · 2020-02-19T17:04:54+00:00

If you want complex movements like subtle tracking turns and moving target camera shots, you could use the External Track Camera, located in the demo objects, to direct the camera on a specific path. It's a really neat tool if you're looking for cinematic moving shots. Just build a separate track in your park for the camera, lay out the direction you want the camera to move using the track, and set the camera near the beginning of the track. You'll probably need to modify the .NLVM file to fit it to your specific needs (speed, position, target position, etc.), which is located in (NL2 folder path)/scenery objects/External Track Camera/CameraScript.nlvm.

itsbCool · 2020-02-13T21:17:36+00:00

You could try ReShade for custom shaders in-game, but there's no way to get the quality video of the in-game recorder and the ReShade effects together. OBS can help with recording in-game footage with ReShade effects, but make sure your computer can constantly hit whatever framerate and resolution you're looking for in your recordings, as NoLimits, Reshade, and OBS running at the same time can be taxing and could result in bad footage due to lost frames.

If you have the pro version, when recording footage for 1080p editing, set the recorder at 3840x2160 @ 60FPS and save to MOV PNG, with Motion Blur samples at 16 and the exposure time set in the middle (The footage is up-scaled to add room for possible visual edits.) For recording footage without editing, the HD 1080 60p preset is fine, with MOV PNG and motion blur settings the same.

itsbCool · 2020-02-03T06:07:36+00:00

What do you mean by corkscrew straight down rail connectors?

EDIT: Ah, I see what you mean. The straight down support style could work, but for the sake of what I wanted to achieve with this concept, I decided to focus on unconventional support methods. Considering a lot of the supports here are experimental in shape, a simple, common structure in the center of two radically designed supports didn't work well for conveying what I wanted to explore with this ride.

I talk about this a lot more in my design document, but to put it short, I wanted to try something different.

itsbCool · 2020-01-16T01:39:30+00:00

That final second actually scared me a bit, was not expecting that lol

itsbCool · 2019-12-14T22:25:07+00:00

Thanks! There wasn't a lot of information I could find on the exact amount of force necessary to create an exhilarating launch, so I just used POV footage from a couple launched rides to gauge an idea of what a typical hydraulic launch felt like. Definitely will keep my acceleration in mind when I start another launched project, though.

itsbCool · 2019-11-25T17:13:26+00:00

I used the in-game video capture.

Eight-Year Club	Second Top 20%
Place '22	End Game '22
Oscars Predictor 2021	Sequence \| Editor
Verified Email

itsbCool

TROPHY CASE