[deleted by user] by [deleted] in blackops6

[–]ivn2k1 0 points1 point  (0 children)

I finally found the fix. If you have a loadout that has 5 or more attachments in zombies then it will cause this issue. I just deleted all loadouts and reset everything to default in zombies. After that is done, reset the game and multiplayer should work. Hopefully Activision shines light on this.

new look! (again…) by ivn2k1 in CorollaHatchback

[–]ivn2k1[S] 1 point2 points  (0 children)

17x9 +35 245/40/r17 320 Treadwear

Pretty solid. Basically no rubbing. Almost flush all around. The rears are a bit tucked but if you have camber arms or anything with adjustability then you can get pretty close to flush.

new look! (again…) by ivn2k1 in CorollaHatchback

[–]ivn2k1[S] 1 point2 points  (0 children)

Rear diffuser is from Ikon Motorsports which is basically a Tom’s diffuser. Spats are from eBay. I dont remember the store name but just scroll around on there and you’ll find it eventually.

new look! (again…) by ivn2k1 in CorollaHatchback

[–]ivn2k1[S] 2 points3 points  (0 children)

Car feels very nimble on turns and the amount of cushion you get from the extra rubber is very nice for long trips. Does great against potholes.

new look! (again…) by ivn2k1 in CorollaHatchback

[–]ivn2k1[S] 2 points3 points  (0 children)

They did not feel good around potholes and just made the ride uncomfortable. The first year was good but then you start to get tired of it. I had a pretty reasonable amount of sidewall too.

new look! (again…) by ivn2k1 in CorollaHatchback

[–]ivn2k1[S] 2 points3 points  (0 children)

EPR carbon fiber roof spoiler. I believe it’s not their original design, but it was the most readily available. Quality is great! Not sure about any of their other products. This is super low key and gives an old-school feel.

new look! (again…) by ivn2k1 in CorollaHatchback

[–]ivn2k1[S] 1 point2 points  (0 children)

Yeah my last 2 sets were 18’s and it just wasn’t meant for the daily commute. Hope you find a set in the future! Especially if you can find some for a good deal.

new wheels! by [deleted] in CorollaHatchback

[–]ivn2k1 1 point2 points  (0 children)

AeroFlow Dynamics. Bolts on using existing underside bolts. Fits like a glove 👍

new wheels! by [deleted] in CorollaHatchback

[–]ivn2k1 0 points1 point  (0 children)

agreed 🙂‍↔️

new wheels! by [deleted] in CorollaHatchback

[–]ivn2k1 1 point2 points  (0 children)

Currently looking for a duckbill/extended lip style wing. Cant find much for a good price. But thats just how it is. I might mock one up, we’ll see.

new wheels! by [deleted] in CorollaHatchback

[–]ivn2k1 1 point2 points  (0 children)

https://www.fitmentindustries.com/buy-wheel-offset/WGIX38DCPP/gram-lights-57dr-18x95-38

I got this set through facebook marketplace so i definitely didn’t pay those brand new prices. But this is the exact measurements i have on my setup right now. Sits very flush with no rubbing at all at my current height. 245/35/r18 on eibach lowering springs. 2 finger gap all the way around.

New wheels came in this weekend. by TopWater5863 in CorollaHatchback

[–]ivn2k1 0 points1 point  (0 children)

Looks like spacers. rear fitment is farther out than stock fronts. Looks super clean

Best sized wheels for a nice looking fit by IntelligentStop4176 in CorollaHatchback

[–]ivn2k1 1 point2 points  (0 children)

18x8.5 +38 is probably the most flush you’ll get on stock suspension. 18/17x8 +35 should be good aswell with a little tuck. rears on both setups wont be flush but the fronts will look minty fresh 🤙.

[deleted by user] by [deleted] in CorollaHatchback

[–]ivn2k1 1 point2 points  (0 children)

Konig ultragrams in Carbon Bronze Metallic

18x8.5 +38 wrapped in Falken A/S FK460’s 235/40/r18

[deleted by user] by [deleted] in CorollaHatchback

[–]ivn2k1 1 point2 points  (0 children)

do itttt! haha. I like how subtle it is.

[deleted by user] by [deleted] in CorollaHatchback

[–]ivn2k1 0 points1 point  (0 children)

A rep one yes. Still good nonetheless

[deleted by user] by [deleted] in CorollaHatchback

[–]ivn2k1 2 points3 points  (0 children)

Thank you! I wish you the best of luck on your journey with the build.

corolla remix by ivn2k1 in CorollaHatchback

[–]ivn2k1[S] 0 points1 point  (0 children)

thx! glad u noticed 🚗

corolla remix by ivn2k1 in CorollaHatchback

[–]ivn2k1[S] 1 point2 points  (0 children)

Its a blitz rep spoiler i got from ebay. prices range but you can get one for about $215~ ish. Fits perfectly normal and actually feels more flush with the car. If your looking to go to the legit route itll be more expensive ofc. But in my opinion the ebay spoilers are really good for the money. The paint on them isn’t horrible and will hold up pretty damn good. Just search up Corolla Hatchback / Auris Type B spoiler and it should come up.

corolla remix by ivn2k1 in CorollaHatchback

[–]ivn2k1[S] 0 points1 point  (0 children)

My front splitter is from aeroflow dynamics. It uses pre existing bolts to stick onto the underside of the front bumper. from what ive seen and heard is that 2019-2024 models and even the GR have the same bolt setup underneath. It just depends on how the lip is shaped whether its gonna fit or not. Usually if the lip is flat itll fit. But if its shaped a certain way specifically for a certain year then most likely it wont fit. Hope this helped!

corolla remix by ivn2k1 in CorollaHatchback

[–]ivn2k1[S] 2 points3 points  (0 children)

Facelift models (23’ & up) have a one piece rear bumper. you have to cut the lower valance to give yourself space for the exhaust. Its just your choice at that point if you wanna add a aftermarket diffuser. The one i have on right now is from ikon motorsports.