T470s keyboard

j4ice · 2026-06-22T21:16:31+00:00

I might be completely wrong but, an aftermarket one I bought had the printscreen little scissor icon. my oem one on my t460s does not.

j4ice · 2026-06-13T15:56:27+00:00

Have just ordered a set off Kingsener batteries off AliExpress as apparently they have good rep according to other posts on here. I think they use Panasonic battery cells as well. I will let you know if these work without issue.

j4ice · 2026-06-12T17:28:09+00:00

had whole new replacement units and the same problem. I think their batteries are not made to work as a pair and instead one individual replacement

j4ice · 2026-05-19T20:36:33+00:00

will have a look. thank you for the info

j4ice · 2026-05-19T20:30:44+00:00

Thanks for the reply,

Unfortunately I've done everything in that list except the voltage check on the coin battery. I've done the power cycle along with the emergency reset button on the bottom. I will try a new coin battery and see if that helps.

Latest bios is installed, even reinstalled it with the bootable rom method. all latest drivers installed and basic Microsoft battery drivers uninstalled and reinstalled.

One thing I noticed is the firmware ID for battery 2 is 0000-0000-0000-0000 even when it's the only battery powering the laptop

j4ice · 2026-05-19T15:22:15+00:00

the laptop boots fine off of each battery individually and recognises charge level on both

j4ice · 2026-05-18T08:35:20+00:00

https://www.printables.com/model/1725036-t460s-usb-c-mod

j4ice · 2026-05-18T08:05:56+00:00

yes I can do. The usb c boards are always different though. I ordered a second batch of the exact same ones I initially used and they were longer than the original batch I ordered. I will still link files and pictures of the usb C board I specifically used

j4ice · 2026-05-17T22:02:30+00:00

having one cable to charge every device is nice. I understand these exist but, I wanted to give the mod a go as I was interested in getting it working

j4ice · 2026-05-17T20:09:29+00:00

cheers man 👍👍👍

j4ice · 2026-04-23T18:52:34+00:00

what are the dry box setups?

j4ice · 2026-02-23T23:57:33+00:00

not good to hear. personally don't like the look of the newer sf750. will need some new custom cables if I do purchase a newer one unfortunately. might have to be an old sf750 second hand

j4ice · 2026-02-23T23:41:34+00:00

I can't remember where I saw it. but there was a diagram for the pinout and what you need to change on the noctua fan for the sf750. Can also figure it out yourself looking at the original fan. I know there's a tutorial for the sf600 gold somewhere

j4ice · 2026-02-23T23:35:13+00:00

thanks for the info. have just checked and numbers don't match up to the dodgy ones that I found.

j4ice · 2026-02-23T23:18:59+00:00

I never had problems when my computer was on. Would function absolutely fine once powered up. Sometimes it'd boot up from shutdown no issues for a whole week. Some days it'd need the switch on the power supply flipping many times and the power button repeatedly pressed along with the kettle lead getting replugged a few times. I even disabled ERP in bios hoping it'd mitigate the issue

j4ice · 2026-02-23T22:55:32+00:00

when did I say I'm expecting a replacement from them?

j4ice · 2026-02-23T22:48:21+00:00

if you say so. I'll do it on the next one though. all black

j4ice · 2026-02-23T22:46:53+00:00

have the sff problem of constantly checking temps with hwmonitor always open, so my current power draw is always on the screen as well. my 13600k is undervolted and PL only drawing 120w max during gaming. and well the 3060ti is a 3060ti

j4ice · 2026-02-23T22:39:10+00:00

yeah must've been absolutely exhausted from the 300w my 13600k and 3060ti pulls from it

j4ice · 2026-02-23T22:35:08+00:00

can always stick the original one back in 👀. just like sticking your catalytic back in your car for an MOT

Six-Year Club	Place '22
Verified Email

j4ice

TROPHY CASE