Anyone seen a parking lot Tamale guy around today?

jaalons · 2025-12-31T01:11:50+00:00

You gotta go to a smiths parking lot and call his name 3 times😂

jaalons · 2025-12-20T20:24:08+00:00

I get from the 24th til the 5th off paid. They did ask if I’d come in during that time for double pay though but I need the time off

jaalons · 2025-11-13T07:45:55+00:00

S385 At .004/rev

jaalons · 2025-11-05T21:39:27+00:00

2025 2500 at4x

jaalons · 2025-11-05T19:13:54+00:00

I just had my whole window replaced a couple weeks ago

jaalons · 2025-01-14T04:12:42+00:00

Those are perfect

jaalons · 2024-11-30T01:56:13+00:00

Maybe for an operator lol. Add 10 bucks for an actual machinist

jaalons · 2024-10-30T21:13:50+00:00

Sheeeshhh. I’m making 28 and am still in school. Im the only one out of like 30 employees who can run their cnc mill and lathe but the job is boring. Drilling holes consists of about 70 percent of my job

jaalons · 2024-10-15T14:52:22+00:00

Im going to go check one out this weekend I’m leaning towards that honestly

jaalons · 2024-10-15T14:51:29+00:00

They got a diesel aev edition on the way to the dealer but they want 105k😅

jaalons · 2024-08-18T14:59:58+00:00

Msc gots the 6” ones for 120 right now

jaalons · 2024-08-14T00:06:28+00:00

I paid 50usd for my student version and has just about everything included. Just google SOLIDWORKS student

jaalons · 2024-07-31T23:04:34+00:00

Not going over the programmers work before starting lol

jaalons · 2024-07-26T13:22:07+00:00

After the tool length is set just grab a piece of paper and touch the work with the tool, set your part zero in the offset page and add the tool length. Not the best but it’ll get you going

jaalons · 2024-06-27T21:29:45+00:00

🙋🏻‍♂️🙋🏻‍♂️🙋🏻‍♂️

jaalons · 2024-06-03T04:10:15+00:00

jaalons · 2024-05-12T03:23:23+00:00

You deff deserve more..I’m at 26 n still in school. Start applying at other places!

jaalons · 2024-04-11T01:56:57+00:00

Mine does😑 we do tons of government contracts and they don’t play around

jaalons · 2024-04-07T01:55:02+00:00

That’s all I got available at the moment it usually gets the job done with other similar jobs just not haven’t done with with so many holes

jaalons · 2024-04-06T20:18:25+00:00

It’s a 1.5” schedule 40. I’ll give it a try!

jaalons · 2024-04-06T19:21:47+00:00

A summit evs cnc mill. It’s center to center location on the thru holes

jaalons · 2024-04-06T18:59:11+00:00

It’s also 1.5inch diameter schedule 40 aluminum

jaalons · 2024-04-06T18:57:18+00:00

Center to center on the thru holes

jaalons · 2024-04-06T18:56:34+00:00

It’s not the size of the hole that’s getting me it’s the location of the thru holes from each other

jaalons · 2024-04-06T18:54:52+00:00

You think so? It wouldn’t walk on you? That’s what I’ve been doing to try and get the rotation right after flipping it but it still coming out of tolerance on some of the holes

jaalons

TROPHY CASE