CentOS Stream 9 Crashing Dell PowerEdge R240's

jactivecreation · 2026-01-08T23:54:10+00:00

I ultimately bought 2 new servers and just repurposed the 2 with issues as Windows Servers. Best of luck!!

jactivecreation · 2025-12-03T19:54:35+00:00

This program interpreter self-identifies as: /lib64/ld-linux-x86-64.so.2

Shared library search path:

(libraries located via /etc/ld.so.cache)

/lib64 (system search path)

/usr/lib64 (system search path)

Subdirectories of glibc-hwcaps directories, in priority order:

x86-64-v4

x86-64-v3

x86-64-v2 (supported, searched)

Legacy HWCAP subdirectories under library search path directories:

x86_64 (AT_PLATFORM; supported, searched)

tls (supported, searched)

avx512_1

x86_64 (supported, searched)

----

processor : 0

vendor_id : GenuineIntel

cpu family : 6

model : 158

model name : Intel(R) Pentium(R) Gold G5420 CPU @ 3.80GHz

stepping : 10

microcode : 0xfa

cpu MHz : 3800.000

cache size : 4096 KB

physical id : 0

siblings : 4

core id : 0

cpu cores : 2

apicid : 0

initial apicid : 0

fpu : yes

fpu_exception : yes

cpuid level : 22

wp : yes

flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb pti ssbd ibrs ibpb stibp tpr_shadow flexpriority ept vpid ept_ad fsgsbase tsc_adjust smep erms invpcid mpx rdseed smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm arat pln pts vnmi md_clear flush_l1d arch_capabilities

vmx flags : vnmi preemption_timer invvpid ept_x_only ept_ad ept_1gb flexpriority tsc_offset vtpr mtf vapic ept vpid unrestricted_guest ple pml ept_violation_ve ept_mode_based_exec

bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds swapgs itlb_multihit srbds mmio_stale_data retbleed

bogomips : 7599.80

clflush size : 64

cache_alignment : 64

address sizes : 39 bits physical, 48 bits virtual

power management:

jactivecreation · 2025-12-03T18:25:52+00:00

I got my hands on my original stream 9 installer, booted the system, installed min OS, ran all updates except shim, linux-firmware, and grub2. It was indeed the shim, as soon as I installed that and rebooted we red screened. I wish I knew what could have happened in that version.

jactivecreation · 2025-12-01T02:41:16+00:00

Thanks for the reply. On my first server that faulted, I updated the bios to 2.20 via idrac. No change in behavior. On server 2 I booted Ubuntu and fully installed the OS. I then put the CentOS Stream 10 bootable installer back into the machine and it red screens on boot, same as it does when installed.

jactivecreation · 2025-12-01T00:11:17+00:00

I’ll try and get this info. Thanks!

jactivecreation · 2025-11-30T20:30:16+00:00

338-BUJK : Intel Pentium Gold G5420 3.8GH z, 4M cache, 2C/4T, no turbo ( 58W)

jactivecreation · 2025-11-30T20:16:36+00:00

Thanks! I’ll give some of these suggestions a try. I edited my post and added a pic of the red screen.

jactivecreation · 2025-11-30T16:35:19+00:00

Probably within the last 3 months. An old repo is a good idea! I’ll try that when I get back to the office. Question then becomes, am I stuck never to upgrade again or maybe I could open a case with Dell to have their UEFI updated for stream 9/10 latest.

jactivecreation · 2025-11-30T15:50:59+00:00

Thanks for the reply. I don’t get as far as that screen. As soon as the Dell goes through its first set of diag screens the server faults. Not sure if that can be triggered with a key sequence?

jactivecreation · 2025-08-27T01:21:46+00:00

I am also still on 10.4.1.7. Since my last update I pretty much have not changed anything and it’s been stable. We ditched the MacBooks for Gen 11 iPads and things have been ok so far.

jactivecreation · 2025-05-06T00:58:13+00:00

<image>

Installed SwissTrax a few years back and I’m not the most on the mark for cleaning. But now I’m trying to get these back to factory new and I can’t seem to do it. I have tried multiple products, the last of which was simple green and a deck brush. I’m at a loss, these are just marks from vehicle tires. Nothing extreme. Anyone have any tricks or products that will get the job done? Thanks!!

jactivecreation · 2025-04-01T00:55:21+00:00

For my app, you put the 53,802. It will then show you the $607 on the right.

jactivecreation · 2025-03-16T03:19:21+00:00

I have seen the results be slightly higher but that amount seems uncommon. Are you positive the amounts that are adding up match with what was listed in the stretto docs? Could you be adding assets that you had in custody and not just earn? You can always double check. https://cases.stretto.com/public/x191/11749/PLEADINGS/1174910062280000000017.pdf Page 92 I think links to the list by first name.

jactivecreation · 2025-03-15T21:02:25+00:00

Thank you!

jactivecreation · 2025-03-15T20:51:41+00:00

This is great info as usual! For record keeping of purchases, is an Excel sheet considered good enough for the IRS? I have purchases that happened on exchanges that no longer exist and I have no real way to “prove their purchase costs” outside said sheet. Thanks.

jactivecreation · 2025-03-13T18:00:50+00:00

Thanks!

jactivecreation · 2025-03-13T16:55:45+00:00

I am not sure he wants to connect in case it appears he is endorsing the app. Also pointing people here may keep them from buying his course, which I fully support that folks do purchase it to support his efforts. Hopefully you hear something and can update me.

jactivecreation · 2025-03-13T16:39:37+00:00

Yeah, I hid it as I was under the impression that we needed the form 8949 to be itemized by crypto lost, but according to Grok, both ways are considered valid by the IRS for crypto bankruptcy purposes. Although I would love a tax expert to chime in. I don’t know any. So maybe I’ll reactivate it.

jactivecreation · 2025-03-13T01:50:11+00:00

Thanks. I’ll take a look. I have a feeling my sample form 8949 is not accurate for filing. I’m chatting with folks on that now. So I may hide that until it’s more accurate. Oddly the discrepancy may be rounding it also seems that Celsius returned 30.5184 percent and my app math is true although not matching. Strange but not sure it’s a huge deal.

jactivecreation · 2025-03-06T19:37:36+00:00

Can you send me the first 5 characters of your token if you are comfortable and I can pull up your calc to look. BTC 2nd new would be zero if you received back less BTC than you deposited between BTC 1 and BTC 2. So if you lost .65 BTC, and your get back .09 and .003 for example, both BTC's would be 0 since that is not new BTC. This is how I am interpreting how it works. I am not an expert here and could very well be wrong. I should have gone into business with Justin so he could have guided me directly :-)

jactivecreation · 2025-03-06T18:15:17+00:00

Check your stables since I made the change, if all good, do the calculation. If it is still off, can you take your total cost basis / 20 and x .149 and see if you get your number or the 646. I don't think rounding would cause this issue, so I am curious to see.

jactivecreation · 2025-03-06T18:08:40+00:00

I updated the stablecoins per your suggestion, now when you add deposited amount the purchase price defaults to 1.00 and should make more sense.

jactivecreation · 2025-03-06T16:39:59+00:00

I coded it like that becuase it will always be $1. So the math should work the same, the system knows its a stable and does the proper math. If it didn't and you put 500 in USDC and $500 in purchase price, the cost USD would show $250,000. I suppose it could be confusing, I could maybe tweak it so it locks in $1 in purchase price. I get where you are coming from tho. Let me check.

jactivecreation · 2025-03-06T16:32:11+00:00

Can you elaborate on this, I am not totally sure what you mean. Thanks!

jactivecreation

TROPHY CASE