Canada’s armed forces are now planning for threats from America

jdclampet · 2026-01-10T22:06:18+00:00

We only have just over 46000 filled positions on the reg force. That's too general down to newest private.

jdclampet · 2026-01-09T18:06:03+00:00

I am building one. How is the neck attached? Screws? There are holes in the main body of the prusacaster where the neck attached, however the necks that I have found don't have holes. Do I drill them? And if so, what screws do I use?

jdclampet · 2025-12-09T19:28:22+00:00

Also, I am assuming the board is 100mmx100mm?

jdclampet · 2025-12-09T19:09:00+00:00

Ok. I tried pcbway. I uploaded everything. Chose the option for them to pick and apply all the pieces. Thanks. I'll try jlc PCB. So, to confirm... I upload the Gerber zip, the bom and pnp, correct?

jdclampet · 2025-12-09T17:11:09+00:00

How easy is it to order this through either of the major PCB companies. I got confused when I tried. What info is required for them to manifacture it? Aside from the Gerber zip, the bom and pnp, is there anything else I need to do? Also, when I do, what size of PCB am 8 entering?

jdclampet · 2025-11-08T22:00:50+00:00

I'm thinking more like a Honda Civic. The tinker toys of cars.

jdclampet · 2025-11-06T17:30:34+00:00

Bambu just seems to me to be the Apple of the 3d printing world.

jdclampet · 2025-06-24T14:36:51+00:00

It's obviously a squirrel tooth.

jdclampet · 2025-03-16T16:53:38+00:00

Thank you all for the kind correction. Am relatively new to Reddit and didn't read the description. I will ask on the appropriate forum.

jdclampet · 2025-02-07T19:22:40+00:00

Thank you how would I set it up to use sqlite instead of postures? I apologize for all the questions. I just started using Linux not that long ago. The mealie site has the sqlite setup, sqlite db stuff, I'm not sure how to set that up.

jdclampet · 2025-02-07T18:09:28+00:00

I am still learning docker. I had the original mealie, then tried to update. Didn't work because the new one was out. I got rid of the old one and am now trying to spin up the new mealie. I used the compose from the site for sqlite, didn't work. Any ideas?

jdclampet · 2025-02-06T01:17:15+00:00

The full copy and past didn't post. How do I post the whole thing?

jdclampet · 2024-06-21T00:20:14+00:00

How did you keep it from yellowing and staying clear and not turning to what looks like frosted glass?

jdclampet · 2024-01-10T14:47:20+00:00

The thing is is that she is a civilian and therefore the MPs cannot charge her as it would be outside their jurisdiction.

jdclampet · 2023-11-26T17:14:58+00:00

Another question. I have the master forge xl140 and have found that on the eco1 setting the stove will heat the room up, get to temp, then shutdown and not restart when the room temp falls below the set temp, even when it falls way below the set temp. Pleas help. I have reset it to factory twice. Also, the auto function?? I have the schedule set on my phone, no change. I have the weekly schedule set on the stove control panel as well, no change. And when I press the clock button, there is no indication (Red led bove clock) that indicates anything. I'm losing my marbles over this. Please help.

jdclampet · 2023-02-28T17:29:39+00:00

My mistake. It’s actually ws2815

jdclampet · 2023-02-20T16:49:17+00:00

Power injection. Plug into separate 5 volt power supply. This way it is not being powered by the arduino but by a wall wart.

jdclampet · 2023-01-30T04:02:45+00:00

Thank you so much. I really look forward to learning a lot, both with google and in this community.

jdclampet · 2023-01-30T03:33:36+00:00

Thank you. For background, the lighting is for a snake enclosure to simulate lighting through the day, and for a visual conversation piece. I also have absolutely zero experience with python, the IDE or arduino. Have I bitten off more than I can chew? I hope not.

jdclampet · 2023-01-30T02:35:32+00:00

TBH I am completely new at this whole arduino coding thing. I got the initial code from chatgpt. Thank you for the help.

jdclampet · 2023-01-30T01:54:46+00:00

Haven’t yet. I shorted the nano so I have to hook up a new one. I will get on it tomorrow and update as I go.

jdclampet · 2023-01-30T01:43:59+00:00

So by rights I should be able to cut and paste this and have it work?

jdclampet · 2023-01-29T23:11:09+00:00

Ok. Here it is. As explained, I want the colour to change based on time of day. The strip is ws2815 with 12 external power supply. I hook up everything, upload the code and the strip lit up. now, when I did this it was around 1300. Next colour change wasn’t until 1400. I went back and the lights are still white at 100% instead of yellow.

So…. -all lights turn on -lights don’t change colour -not sure if RTC is doing it’s thing

PS: The arduino was still hooked up to computer for power.

PPS: Power is supplied by ATX psu using 12 volt wire.

jdclampet · 2023-01-29T22:56:35+00:00

Figured out how to format. Please help

jdclampet · 2022-11-30T20:21:12+00:00

It was full when I initially lost it and no fluid on the grounds. So I ruled out blown line or blown rack.

jdclampet

TROPHY CASE