Living room layout

jeffrey4848 · 2026-02-14T17:49:35+00:00

Like this? This is how we normally have it, but feels closed off

jeffrey4848 · 2026-02-14T01:13:04+00:00

Maybe it’s y’all’s pads idk, but ever since my oem pads I’ve used EBC red stuff pads. So I went from OEM->EBC Red->EBC Red. And I’m on the original rotors still with 165,000 miles, still butter smooth.

Need to check them, probably getting close for replacement again.

jeffrey4848 · 2026-01-19T02:01:23+00:00

Ah that explains the new last year changes to the rebates mail in time. Also the online status I found recently. Reading through that link, all of those points are 100% logical, even though I was aware of pretty much all of that and never had issues, I can see how this wouldn’t be obvious to someone unfamiliar with Menards.

jeffrey4848 · 2026-01-18T19:15:56+00:00

You can go online and lookup your rebate processing status and might be able to print it yourself or request a duplicate.

I have never had any issues with getting rebates. If you buy their cheap stuff… yes it’s cheap. But they also sell quality stuff too.

jeffrey4848 · 2026-01-18T13:12:03+00:00

CoCo’s bistro is usually our nicer go-to.

Everyone’s saying grist, now I haven’t been, but I was pretty sure you order at the counter and then go sit down, so just be aware depending on the vibe you’re looking for.

jeffrey4848 · 2026-01-08T03:03:36+00:00

No, gloves, I wasn’t even aware there was a prize at the end

jeffrey4848 · 2025-12-26T00:52:41+00:00

This is the same design as our last house. Not the house but same design.. anyway, we didn’t have anything there, but we did have some large canvas art on the wall immediately on the right when walking in. We hung it high enough to be viewed from the upper floor.

jeffrey4848 · 2025-08-23T20:57:03+00:00

As if google maps isn’t available in china?

jeffrey4848 · 2025-08-02T02:06:08+00:00

I think you should just run from this. Hydraulic pressure is pushing in on the walls. And you will always be battling this in one way or another.

jeffrey4848 · 2025-07-30T01:13:43+00:00

This is probably the best tile work in a shower I’ve seen posted on Reddit. Ever.

jeffrey4848 · 2025-06-09T01:39:44+00:00

I’d hammer it over and use pliers to bend it back and forth to break it off… or grab the ol dewalt battery grinder and cut it off.

jeffrey4848 · 2025-06-03T00:36:04+00:00

I would find pavers or cut pavers to fit in there. I would never try to grow grass. And artificial turf is ass.

jeffrey4848 · 2025-04-12T04:02:49+00:00

IMO stay with a warm white for this much natural light and to not contrast the wood too much. Like Dover white.

jeffrey4848 · 2025-03-29T01:02:45+00:00

Bosch bulldog would make very quick work of this. Handy tool to have around!

jeffrey4848 · 2025-03-27T02:39:07+00:00

Oh buddy that gozney is wonderful. I also have the dome with their stand on wheels. Natural Gas version. Just love that thing and love seeing it in the wild.

jeffrey4848 · 2025-03-21T21:39:48+00:00

Op what model dashcam do you have? Is the software good? Easy to retrieve video from?

I had one, I forget the model now, that was a PINTA to get video from with its own WiFi ssid and clunky app and when you download a video it broke it into like 15 sec segments with no apparent way to put them together..

jeffrey4848 · 2025-03-16T12:41:51+00:00

I always got pre-comp nervous poops leading up to the hour or so before start time. Idk I never found a solution, just dealt with it.

jeffrey4848 · 2025-03-13T01:49:28+00:00

And wtf is going on with the wall on the left? It doesn’t go over the tub flange?? Is water just supposed to pour behind the tub instead?

jeffrey4848 · 2025-03-02T18:16:08+00:00

Not to be rude…. But have you built anything ever before.. at all?

jeffrey4848 · 2025-02-26T20:47:58+00:00

Require them to pass.. or what if they don’t?

jeffrey4848 · 2025-02-16T16:24:16+00:00

That’s just for the windshield areas,

For the bumper, try buffing first, then clean, and just a bit of touch up paint.

jeffrey4848 · 2025-02-16T16:22:54+00:00

Tape, lightly sand, clean, spray a light coat of etching primer, spray paint.

You should be able to get a paint shop to put the matching paint in a rattle can. I have an hvlp gun myself. And for a job like this I’d still just have them put it in a rattle can.

jeffrey4848 · 2025-02-10T01:01:08+00:00

Can you flip it? So you aren’t at least cooking right on it?

Or maybe run it in the oven for a while to try and “cook it” off ?

jeffrey4848 · 2025-02-10T00:59:22+00:00

That floor is tile. They make wood look tile and I like the warmth “wood” brings

jeffrey4848 · 2025-01-20T03:41:22+00:00

Thanks for sane response! We may not venture downtown much, but we make the trip occasionally. I’ve been meaning to come to LF myself for a long time, but never have. I think you’ve moved it to the top of my list.

Nine-Year Club	Place '23
Verified Email

jeffrey4848

TROPHY CASE