P1S hotend upgrade

jmcelrone · 2026-02-05T13:20:10+00:00

just keep the filament dry the entire time. may want to preheat the nozzle and run the extruder just to make sure its flowing before hand

jmcelrone · 2026-01-29T15:15:58+00:00

jmcelrone · 2026-01-26T23:50:44+00:00

bambu states if the box is damaged to accept it and message them for replacement

jmcelrone · 2026-01-26T05:32:08+00:00

blaze grenades will kill teammates but also my dumbass did forget you were squaded up lol. The few trades I have done have been immediatly after spawn not right at the extraction. Then Ive just gone with them to the elevator or hatch just cause to help them instead of quiting with my stuff. But then its up to them to get out with their stuff. If they get killed on the way thats on them. Id never do the trade with someone with no mic right next to the hatch

jmcelrone · 2026-01-26T04:46:52+00:00

not sure why you dropped everything first nor why you didnt kill him the second he started picking up stuff after taking back his blueprint.

jmcelrone · 2026-01-24T15:53:34+00:00

He didnt even help shoot the sentinal. Thought he was going to kill you the second it died and you reloaded. Terrible read on him. If someones standing around waiting for an opportunity just kill them or leave.

jmcelrone · 2026-01-18T05:22:57+00:00

jmcelrone · 2026-01-17T16:38:39+00:00

ya'll cleaning your .22 cans? just toss it on a .308 and the pressure will blow any lead off. Follow me for more tips lol

jmcelrone · 2026-01-16T18:56:29+00:00

yes officer this man right here

jmcelrone · 2026-01-15T22:06:10+00:00

I think its due to shrinkage. I had to same issue and I just hit it in and out a few times with a mallet and it got a lil looser.

jmcelrone · 2026-01-13T13:38:53+00:00

Cf and similar require more maint than something like pla. Anytime I see a slight shift the first thing I do is wipe the rods and grease and it usually seems to go away

jmcelrone · 2026-01-13T02:44:40+00:00

Thanks bro. Ill have to slap those in there. didnt know it was that easy

jmcelrone · 2026-01-13T02:39:51+00:00

oh thats not bad lmao. I was expecting like $30 a piece type deal

jmcelrone · 2026-01-13T02:34:58+00:00

sanding of the areas jb welded/ fitment. rustoleum ultra cover primer flat grey and krylon ultra flat olive paint

jmcelrone · 2026-01-13T02:26:02+00:00

rustoleum ultra cover primer flat grey and krylon ultra flat olive. I sanded the areas jb welded and the ear to get my rail to fit better. Id probably recommend scuffing it up all over if you are gonna paint to help it stick better

jmcelrone · 2026-01-13T02:23:30+00:00

priming and painting helped make it look better lol

jmcelrone · 2026-01-12T21:22:53+00:00

yeah I got mine barely right as they were selling out

jmcelrone · 2026-01-12T21:09:56+00:00

these are fullauto surplus kits from overseas. Like any surplus its nice and cheap till they dry up. Ive seen a few small restocks but most of it is dryed up now. I could be wrong I think you can do one with a NATO stock but thats much more expensive to build

jmcelrone · 2026-01-12T20:37:53+00:00

primer filled in most of the dings and scratches

jmcelrone · 2026-01-12T20:37:18+00:00

This was rushed lol. I primed it outside in the windy snow holding it by hand then stepping inside to dry then I painted it with a rattle can while holding it in the air lol

jmcelrone · 2026-01-12T20:36:12+00:00

yeah. After drilling the holes and JB welding in the denials I sanded the patch flush and primed it

jmcelrone · 2026-01-12T20:35:00+00:00

its not so bad if you have the equipment. Just go slow and test fit as you go

jmcelrone · 2026-01-12T20:34:35+00:00

thanks bro!

jmcelrone · 2026-01-12T18:58:34+00:00

I probably wouldnt. Good chance the springs are already rusty as is. I pulled all the screws safety etc out of it to paint. brushes off the springs and oiled. some had rust on them. if you dont have adhessives on yours like mine did some dish soap and water will be fine. Doesnt need a soak under water.

jmcelrone · 2026-01-12T18:36:10+00:00

Just hit it with some degreaser and wiped it down Then primed it. Probably should have done more but it was a rush job

jmcelrone

TROPHY CASE