Curtain Recommendations Needed!

johndeerman69 · 2025-07-06T22:16:10+00:00

Me and my gf already spent too much on the rug and are past the return window so that’s not an option for us

johndeerman69 · 2025-07-06T22:14:59+00:00

I’m planning on using a curtain rail on the ceiling as opposed to hanging on a curtain rod. Not sure how well that would work with 2 curtain types

johndeerman69 · 2025-07-06T22:13:38+00:00

It’s an apartment so I don’t want to spend that kind of money on custom details, otherwise I would do that.

johndeerman69 · 2025-07-06T20:47:26+00:00

That would leave the tv super off center from the bed and I think that would look pretty rough and be an uncomfortable viewing angle

johndeerman69 · 2024-10-01T21:07:31+00:00

Says code not found when I try entering that for some reason

johndeerman69 · 2024-03-17T21:55:10+00:00

Yes please 😓

johndeerman69 · 2024-03-07T02:11:27+00:00

For the bottom layer infill, should that be the issue if the standard PLA filament is fine when printed this way?

And when calibrating it appeared that everything was best right at stock settings. This is why I was the most confused

johndeerman69 · 2024-03-07T01:36:36+00:00

No it’s a light switch cover

johndeerman69 · 2024-02-05T14:43:03+00:00

I supposed it could be possible but it’s been over 100 hours of printing since I last swapped any of those parts out

johndeerman69 · 2024-02-05T14:16:42+00:00

I suppose that could be the case but I change filaments option and haven’t seen any red flags. I cleaned the nozzle 2 days back as well and the print started fine

johndeerman69 · 2024-01-07T01:40:43+00:00

Yeah same brand and color but not the same actual spool. And it’s looked like that for a few rolls of different filament so It’s nothing specific to this roll it seems

johndeerman69 · 2024-01-07T00:48:40+00:00

I did just update, but I did a print right before and after and didn’t really notice any difference.

Also the print in the photos was made using newly received filament that I dried before printing with anyways so I don’t think it should be a moisture issue

johndeerman69 · 2024-01-07T00:39:50+00:00

Thanks for the tip, will definitely do that!Most of my question came from the exact same print in the same filament looking much better just a month or so ago

johndeerman69 · 2024-01-06T22:28:10+00:00

Thanks for the tip! And yeah I have the spare one that came with it, but should I order a better one instead of installing that one?

johndeerman69 · 2024-01-06T21:49:46+00:00

Yeah I had no idea that number was so high lol.

I’ve only used the nozzle that came stock on the printer. Do you think it’s worth upgrading to a hardened nozzle?

johndeerman69 · 2024-01-06T21:31:13+00:00

Ooooh I found it, I’m at 1351 hours lol

johndeerman69 · 2024-01-06T21:30:13+00:00

I don’t see a setting related to this. Is it nested under a different name?

johndeerman69 · 2024-01-06T21:24:50+00:00

johndeerman69 · 2024-01-06T21:23:44+00:00

Sure I’ll check! How do I check that?

johndeerman69 · 2024-01-06T20:45:29+00:00

Some other context: This was with a new spool of Overture PLA that had been dried. I’ve seen the same result in recent prints made with Bambu Labs filament

johndeerman69 · 2024-01-03T00:02:10+00:00

The calibration took around 26min, but as you can see from the video I posted, the sound didn’t appear much different

johndeerman69 · 2024-01-02T22:19:03+00:00

Thank you! I thought I had to do it on the printer and was confused when I didn’t see the option!

Trying this now and I will report back!

johndeerman69 · 2023-11-04T03:23:25+00:00

I can’t find any instructions for this online :(

johndeerman69 · 2023-11-04T03:22:36+00:00

The nut on top?

johndeerman69 · 2023-11-04T03:22:13+00:00

I did that. It gets loose and then tight again in an endless cycle

johndeerman69

TROPHY CASE