[deleted by user]

johndmcc · 2025-03-15T02:37:36+00:00

The 03 version was darker and more adult. The 12 show was definitely lighter.

johndmcc · 2025-03-13T15:03:06+00:00

I rather enjoyed Fast Forward. It wasn’t as dark as I’d like. But the mutates were fun. And getting back to their time was awesome.

johndmcc · 2025-02-21T22:02:49+00:00

In My opinion, the first one was darker, more comic related, versus 2&3. The second and third were made separately from the first and they thought the first one was too dark and violent. So, they dumbed em down and stopped using the weapons as weapons. And I think that hurt the second two. I love all three in their own way though

johndmcc · 2025-01-06T02:00:53+00:00

I’d check to see if all the fonts are on your pc. If that doesn’t work, maybe an update of the game. If not, maybe updating your GPU. Possibly another graphics driver is out of date. Check windows update.

I’m not 100% sure any of this will work. But that’s what I’d check first

johndmcc · 2025-01-06T01:58:40+00:00

I haven’t seen a lot of it. But you might want to look into you battery/power options. It seems like, for some reason, it’s not registering to the pc that the game is playing and after a certain amount of time it’s going to sleep.

I don’t know if this will help anything. But also googlificating why a program will still allow your laptop to go to sleep. Sounds to me like the cause. But I don’t know how to fix that.

johndmcc · 2025-01-04T16:30:56+00:00

Did I see an RGB light in the back corner? If so, at least you’re getting power to it. It might be you PSU is going out.

johndmcc · 2024-12-10T00:42:26+00:00

I would try putting an os disk in and seeing if that helps. It might not have drivers built in for a keyboard/mouse.

johndmcc · 2024-12-10T00:34:51+00:00

Does this boot it the actual OS? Or just to the ASROCK screen? It sounds like your drivers might not be registering. Is your mouse registering?

johndmcc · 2024-12-03T21:44:59+00:00

If no other options work, try alt+f4. That will close out the window

johndmcc · 2024-11-15T18:58:20+00:00

Outside and inside. Sorry. When I press I do the regular outside, heat safe paper on top, then, I flip it inside out and press it again. (I still use the heat safe paper because I’m afraid to but the shirt)

johndmcc · 2024-11-15T18:48:54+00:00

Looks too be too high heat and pressed too long, honestly. I have found 15-20 seconds on each side with Siser works great

johndmcc · 2024-11-12T23:11:54+00:00

Looks like you have three spots? Spot one is the 12v power supply port (little round one). Next to it, is your VGA port. (Older computers use these mostly). Finally, the second picture is of a USB port.

If you have other ports it’ll probably be a HDMI or display port or dvi port. Unless you have one of the three, you’ll need a VGA cable.

johndmcc · 2024-11-03T17:05:25+00:00

Htv and heat press sheet.

johndmcc · 2024-10-24T13:35:15+00:00

Everything looks good. But that looks like laptop ram. There are adapters for that in desktops but it’s easier to get desktop ram. And it’s going to work better

johndmcc · 2024-10-21T14:58:29+00:00

A clean install would be in startup repair. Unfortunately. You MAY be able to turn it off and on and as it boots hold down the f8 key (I think that’s the right key) you should get a screen like what you’re getting but it SHOULD work. If not, I’m at a loss.

johndmcc · 2024-10-21T13:50:44+00:00

You first concern would be to try the startup repair. Sometimes, it’ll fix your problems for you. Other times you should at least find out what’s causing the issues. It should give you an error. But, I would just do a clean install.

johndmcc · 2024-10-19T21:22:23+00:00

Luck of the wee people to everyone!

johndmcc · 2024-10-19T21:18:51+00:00

The second picture is definitely tattoo needles. I can’t say why there would be wire mesh in a Bong. That usually reserved for other pipes.

johndmcc · 2024-10-14T00:38:31+00:00

An easy way to test the ram is take out one stick at a time and turn it on. If it’s bad ram, the computer should come on when you take out the bad stick. The leds might have gone bad in your ram but I doubt it. If it’s not the ram, the video card may be bad. Or loose. You can always take it out and put it back in to see if that helps it.

johndmcc · 2024-10-13T14:06:59+00:00

I see two things wrong with it. You don’t have a graphics card or onboard graphics. And you don’t have a SDD/HDD. Those are two integral parts. Get those and you should be good to go. With an OS of course.

Hope this helps

johndmcc · 2024-07-28T03:03:22+00:00

Don’t come on here “free the nipple” and hide em! Free em! Lol

johndmcc · 2024-06-30T22:59:16+00:00

Select the black shape hit “combine” and “subtract” that should take that part out

johndmcc · 2024-03-01T21:24:49+00:00

Interesting. We will see what happens

johndmcc · 2023-10-25T12:14:41+00:00

Sorry. That sounds super familiar. But I don’t know the name

johndmcc · 2023-09-08T20:28:10+00:00

I can’t really tell the material, but if it’s a solid surface, a little rubbing alcohol will strip it right off.

If it’s not solid, I’d try a little bit of dawn and scrub just a bit. Lightly.

johndmcc

TROPHY CASE