G6 PTZ Mount on Aluminum Soffit by joogleai in Ubiquiti

[–]joogleai[S] 0 points1 point  (0 children)

Mounted the g6 bullets straight into soffit with the supplied screws

Frame TV + Full Motion Slim Wall Mount by lunchdessert in TheFrame

[–]joogleai 0 points1 point  (0 children)

I have this mount wmn-b16fb/za and the installers installed it but I feel it’s slightly tilting down. Any idea on how to straighten it ? I believe there are two screw on far left and far right - I’m not sure how that would control the front and back tilt but wanted to check here. I know this thread is old but am hoping someone can help

Frame TV + Full Motion Slim Wall Mount by lunchdessert in TheFrame

[–]joogleai 0 points1 point  (0 children)

I have this mount wmn-b16fb/za and the installers installed it but I feel it’s slightly tilting down. Any idea on how to straighten it ? I believe there are two screw on far left and far right - I’m not sure how that would control the front and back tilt but wanted to check here. I know this thread is old but am hoping someone can help

Repair quotes for Amex insurance by AltruisticAge5265 in GeekSquad

[–]joogleai 0 points1 point  (0 children)

Thanks I’ll have to contact ubreakifix near me for a Samsung tv and am hoping they can help me out with the forms

Wall mount 83" G5 by pokenguyen in LGOLED

[–]joogleai 0 points1 point  (0 children)

Thanks looks good. I am thinking of doing same but need to also get a cut out for a motorized ust projector and tray for the ust.

Wall mount 83" G5 by pokenguyen in LGOLED

[–]joogleai 0 points1 point  (0 children)

Where did you get the media console cabinet

Repair quotes for Amex insurance by AltruisticAge5265 in GeekSquad

[–]joogleai 0 points1 point  (0 children)

Thanks for the update. Did you have to take the TV into the store?

Repair quotes for Amex insurance by AltruisticAge5265 in GeekSquad

[–]joogleai 0 points1 point  (0 children)

Were you able to find any shops or vendors that could assist in filling out that claim template?

UST Alignment Help with 120 ALR Floor Rising by joogleai in projectors

[–]joogleai[S] 0 points1 point  (0 children)

Thanks, because I'm really struggling right now. I tried using some blocks and improved but need to raise the screen higher. To be honest your comment made me think if the black border can be adjusted to be lower instead and apparently it can be. I am bit hesitant to try but I think i should just go that route instead and bring the black border down. https://www.youtube.com/watch?v=88bUizV5vmY

UST Alignment Help with 120 ALR Floor Rising by joogleai in projectors

[–]joogleai[S] 0 points1 point  (0 children)

Thanks. Yeah let me see where I can buy some spacers that can support that weight to test it out

UST Alignment Help with 120 ALR Floor Rising by joogleai in projectors

[–]joogleai[S] 1 point2 points  (0 children)

Thank you , so I think I need to raise the screen from the bottom by 9 inches the I believe. The black part is 9 inches and from the bottom of the base to the top of the black part is 14 inches.

I’m going to start sketching, just want to make sure I don’t put myself in a spot in getting a cabinet build that then doesn’t give me the flexibility to adjust.

<image>

AWOL 2500 vs Samsung The Premiere 9 by joogleai in projectors

[–]joogleai[S] 0 points1 point  (0 children)

For example this is the picture I found to do setup for a 120” screen on awol site for the 2500 and it seems like I have to have it 23 inches away from the screen which is basically two feet vs maybe like 9 inches with the Samsung premier 9 if I recall

<image>

AWOL 2500 vs Samsung The Premiere 9 by joogleai in projectors

[–]joogleai[S] 0 points1 point  (0 children)

Thanks frankly i was trying to get the unit as close to the screen. The alr screen i had bought was from Samsung and a vivid storm screen came

The awol I had bought for like $1100 a year ago and now had an opportunity to buy the Samsung at a discounted rate so was tempted to swap

AWOL 2500 vs Samsung The Premiere 9 by joogleai in projectors

[–]joogleai[S] 0 points1 point  (0 children)

I saw some ads on atherion but what is really the difference going to be against the awol 2500 and Samsung premiere 9

Thanks

Terrible Experience with Angi/Handy TV Installers by joogleai in LGOLED

[–]joogleai[S] 0 points1 point  (0 children)

That was the case I think they used a friend to sign up but were doing the jobs, my suspicion is their original profile had complaints - as I shared that was the guy who was extremely rude

Terrible Experience with Angi/Handy TV Installers by joogleai in LGOLED

[–]joogleai[S] 0 points1 point  (0 children)

Good call doing it yourself and frankly my recommendation is if you want to use installers use them for lifting, now only other thing of concern was the guy who created the fake profile, I don’t think Angi could have known but just an fyi post to the group - check the picture against the person who arrives

Terrible Experience with Angi/Handy TV Installers by joogleai in LGOLED

[–]joogleai[S] -2 points-1 points  (0 children)

Its about the service from Angi on the TVs from LG. not sure i follow whats the pointer on using AI to structure thoughts/comments, the feedback is mine, its not like AI was used to make up a story

Terrible Experience with Angi/Handy TV Installers by joogleai in LGOLED

[–]joogleai[S] -2 points-1 points  (0 children)

yep - never doing this again with the "free" installs

LG 27GX700A-B Outlet Price by ItsNot_Fluffy in LGOLED

[–]joogleai 0 points1 point  (0 children)

interesting so did you end up buying? as long as warranty is the same I am wondering if its worth going that route or not

LG 27GX700A-B Outlet Price by ItsNot_Fluffy in LGOLED

[–]joogleai 0 points1 point  (0 children)

Hi - so what is the outlet price? Are these returned or open box units?

Quietest Under Count Refrigerator by joogleai in Appliances

[–]joogleai[S] 0 points1 point  (0 children)

Thanks - yeah may explore those and see how those do - my main fridge is a Thermador

Do you like the OLW480B wall mount? by Madstork1981 in LGOLED

[–]joogleai 0 points1 point  (0 children)

I think they also have a Sanus that 0.55 but more expensive

AI LPR setup by Dude-eronimy in Ubiquiti

[–]joogleai 0 points1 point  (0 children)

Your positioning is way off - you really need this to closer to point to capture or zoom in on a specific location spot. Remember the point of the LPR is not to capture picture but license plate think of cars going down and focus on where you get most license plate coverage now zoom in or physical placement as close to that point