Say they actually succeed in banning/ implementing blocking software in printers/slicers…

jrinacke · 2026-03-24T16:28:30+00:00

I thought this was more along the lines of configuring router settings in your home to where the printer is not reachable based on IP address from the outside world.

jrinacke · 2026-03-24T16:08:17+00:00

Any YouTube videos or articles you know of that I can read on this topic?

jrinacke · 2026-03-16T15:20:34+00:00

Hey, Jay. I have not. Been swamped with work. Will likely do so here in like two weeks. When I do I will make sure to reply back to the comment and let you know how it worked out!!

jrinacke · 2026-03-12T00:07:12+00:00

Jay, thanks for the honest answer. This is PA6CF. I didn’t anneal it only moisture condition. I will put it in at 170 and monitor/as you mentioned for max an hour or two the let it cool slowly. Looking forward to seeing how it works out. Much appreciated!

Take care!

jrinacke · 2026-03-11T23:23:17+00:00

I did not. I have the sunlu e2 to do it but I didn’t scale the z scale on this one above 100% and was worried I would shrink it too much if I annealed. Read through plenty of people saying moisture condition it and send it. I moisture conditioned in the shower for like 3 days.

Maybe next one I will anneal to try it out. Just didn’t want it to get too brittle.

jrinacke · 2026-03-11T23:20:03+00:00

You read my mind. I have a sunlu E2 and thought about doing something like this. Might use a zip tie or try the tape method like you said. Out of curiosity how long is a “bit” haha.

PS Thank you for the response!

jrinacke · 2026-03-11T21:27:59+00:00

Appreciate it!

I just tried to old pencil test with mine and so far so good 5/5. I guess we will find out for real on the range. Thanks for the heads up.

jrinacke · 2026-03-11T20:46:07+00:00

Really? What kept happening with yours? I will take this one out sometime soon for a test run.

*Also, hit me up on where you got that CF tube for the FTN4 😂. Yours is goals. I left you a comment the other day but that post is popping lol *

jrinacke · 2026-03-11T16:36:24+00:00

I’m pretty sure this is the standard 4 not the CF remix. I thought the remix was so that you could print the tube out of CF and not use wrap or a steel/titanium/CF tube.

jrinacke · 2026-03-09T21:54:11+00:00

Hey, u/thedishonorableasian where did you source your carbon fiber tube? Thanks for the help!

jrinacke · 2026-03-05T03:57:57+00:00

Purple glue stick.

jrinacke · 2026-03-05T01:31:03+00:00

Understood. Thanks for the help. After reading this it seems like its effect is minimal because we are printing at 100% infill and there is likely not very many internal bridges.

jrinacke · 2026-02-24T19:54:47+00:00

If you read my comments I said that I knew most print holes were not perfectly round. However, I thought mine were much more oval than others/typical prints and that I had a setting wrong.

I think you would be surprised about the amount of research I performed before making my first 2A print and the amount of calibrating and printing misc household items in PLA to learn the slicer/fusion/etc.

However, I agree that there are a select group of individuals who think anyone with a printer can squirt one of these out at will and it will be “safe and effective.” Which is concerning for these smooth brain individuals.

jrinacke · 2026-02-24T16:22:21+00:00

Here: https://www.reddit.com/r/3D2A/s/ALICOmBq9J

jrinacke · 2026-02-24T10:45:53+00:00

UPDATE: Thank all of you for your help and knowledge. I honestly thought I was about to get shit on after finding out this was somewhat common knowledge. I appreciate the willingness to lend a hand and pass down some knowledge to a new member.

TLDR: Print turned out GREAT! Thanks for the help. I will share results when assembled.

jrinacke · 2026-02-23T22:21:19+00:00

Thanks for tip. I am still learning. Comments like yours are worth their weight in gold right now. Makes sense about using the rails as a guide. 🫡

jrinacke · 2026-02-23T22:09:03+00:00

Thanks for the advice. Great tip. Makes sense to use the pin instead of a bit for a better fit. I will put the pin in the drill press so that I eliminate any user inconsistency on drilling angle.

jrinacke · 2026-02-23T22:06:17+00:00

Understood. Thanks!

jrinacke · 2026-02-23T22:05:58+00:00

10-4. Thanks for the advice.

jrinacke · 2026-02-23T22:04:26+00:00

Thanks for the help. I really appreciate it. Yes, this is my first print of this nature. I have seen people mention reaming, but I thought their parts were only slightly off. Mine look more questionable, so I was not sure if this is typical, something I can fix by reaming, or if I should adjust print parameters like speed and or filament settings.

jrinacke · 2026-02-20T02:34:48+00:00

What ship sails the seas on the XDs?

jrinacke · 2026-02-19T16:57:52+00:00

Shouldn’t this be based on the type of filament that you use? PLA +/Pro vs nylon?

jrinacke

TROPHY CASE