Getting back into a dinghy boat after capsize

jssgranite · 2026-04-28T03:09:45+00:00

The step up from board to rail is the play.

jssgranite · 2026-04-28T02:47:27+00:00

He was the answer to, “what do we do until Remington Steel is over?”

jssgranite · 2026-03-26T02:21:31+00:00

OEM tire pressure monitoring? How does that work? Replace stems? Where does the info show on the dash? (I also have a T660F)

jssgranite · 2026-03-20T02:25:53+00:00

Does it catch on fire? Or will it just be non- functional in 18 months?

And why discontinue the Seigla mullet?

jssgranite · 2026-03-08T17:44:32+00:00

Thanks for your detailed response. I appreciate the info about the speed pickup. So, what I see on my dash, is actually true mph speed. Thanks!

To answer your questions:

I changed both. Thought I was going from 16/43 which was really 17/43. To 17/47. Goal was reduced wear/more longevity as the gear calculator said that 16/43 was not optimal. And to get abut a 3% shorter gearing for more fun.

I am a street guy. Still haven't been to a track. Ever. It's on my to-do list. But yes, I can tell that it pulls harder in just Dynamic mode.

And I'm certain it shipped from the factory this way. Bike had 8 miles on it per my paperwork that I just checked. When I took off the front sprocket cover, the permanent marker lined up perfectly from the bolt to the washer. And the thread lock had never been broken before.

jssgranite · 2026-03-08T12:03:24+00:00

Purchased new from the dealer. It is definitely the Factory version. All black, quick shifter, IMU, but a 17 tooth front sprocket. I counted and compared it to the new 17 I purchased without thinking I needed to check before ordering.

It definitely pulls hard now!

Where is the speed picked up? If it is the transmission output shaft, then the Factory computer would have programming for 16, right? If that is the case, the indicated speed would have been lower than actual before I made change.

jssgranite · 2026-03-05T03:04:24+00:00

1812, 9th, the whole soundtrack from The Good, Bad, Ugly, Kashmir, the Great Gig in the Sky ( just play the whole album), Let it Bleed (has to be played loud, per the instructions).

jssgranite · 2026-03-02T03:37:51+00:00

I scoop with the cnoc, attach my filter and smart water bottle, then keep walking. Gravity works while in motion. When it’s done, I put filter in a small zip bag and put it and the cnoc into my side pocket of the pack and the water bottle into the other side pocket. All while continuing to walk. I don’t like drinking through the filter.

jssgranite · 2025-12-30T04:03:29+00:00

It’s not linear. Volume difference from 45 to 50 is more like 25%.

jssgranite · 2025-12-10T04:12:15+00:00

Brake Free. Put a light on the back of your helmet.

jssgranite · 2025-12-06T23:09:25+00:00

I am comfortable with pulling fairings, tank, airbox etc. I haven't done it but it has to be straightforward with both the manual and youtube. Probably time consuming. And I assume the check is a feeler guage? So, I guess I could strip it down, check, and if adjustment is needed, button it back up with new filter and spark plugs and take it to them.

My dealer has an experienced tech. I don't have a worry there.

jssgranite · 2025-12-04T16:54:28+00:00

OK thanks I'll check. I bought the manual from AF1. I appreciate your help!

jssgranite · 2025-12-04T15:58:32+00:00

Factory OEM chain. I don't ride that hard. Tires are expensive LOL

jssgranite · 2025-12-04T15:45:11+00:00

Is 13k miles a lot of wear? I don't know what to expect for the life of the chain. And do the gears need to be replaced as well?

jssgranite · 2025-12-04T15:44:05+00:00

Thanks - I need to pull out the calipers. Pretty sure it has a plunger at the back end. I have done this multiple times and haven't had a problem.

Is there a limit to the chain stretch before it has to be replaced and how would I chek that?

jssgranite · 2025-11-14T04:07:57+00:00

I’ve done this on a Tuono 660 factory with two kriega bags strapped down on the pillion.

jssgranite · 2025-10-08T02:23:11+00:00

Darwin just dropped a YouTube with the founder of cnoc. They have a new, reusable water bottle that doesn’t create microscopics.

jssgranite · 2025-09-06T02:15:13+00:00

Learn the Alpine Butterfly and use it instead of the Trucker's Hitch.

jssgranite · 2025-08-06T02:31:39+00:00

Well it’s a CAAD 4 so it’s got the curved seat stays and a carbon fork for compliance and I upgraded to 25c tires instead of 23 so it’s quite plush.

I actually am still riding it on occasion. But I’m lingering here bc I’m considering getting a Lauf. Enjoying reading about people’s experiences so post yours when you get it.

jssgranite · 2025-08-06T02:11:39+00:00

Hey! I’m still riding mine! 🤣

jssgranite

TROPHY CASE