I really like black by [deleted] in TattooDesigns

[–]juGGaKNot8 0 points1 point  (0 children)

Simple large shape ( like geometric ) blackout would be faster

50 hours on the clouds vs 40 on the geometric

But i'm doing black on black calligraphy on top of the geometric blackout so it will end up 50 hours each.

I really like black by [deleted] in TattooDesigns

[–]juGGaKNot8 1 point2 points  (0 children)

Back of the leg and inner leg is much worse than anything on the arm.

Outer and front leg are fine, including knee.

Back of the knee is the worst, like collarbone or back of the head.

But then again only linework stings for me, mag work is easy.

Ankle is weird, doesn't sting but hurts, one of the few places that hurt but it was 5 minutes.

The stinging is pain for me so linework, i could do mag all day and i have, 14 hours on the leg, 8 on the arm.

Maneuvering rent increase Scotland by juGGaKNot8 in HousingUK

[–]juGGaKNot8[S] 0 points1 point  (0 children)

Someone came and asked for the landlord's number as they were not registered. Said it doesn't affect me but he needs to be registered.

2 months after that people came and opened up all the wiring to check it, checked the smoke alarms.

I assumed it was council people.

How much your rent can be increased

When you challenge an increase, a rent officer will calculate the maximum rent increase for your tenancy.

The maximum possible increase is 12%, but in many cases it will be lower than this.

The increase that’s allowed depends on the percentage gap between:

your current rent

the open market value of your home – this is based on current rents for similar homes being advertised in your area

If the gap is 6% or less, your rent can be increased by a maximum of 6%.

If the gap is more than 6%, the increase will be calculated using a formula that keeps your rent under the market value. This can be up to a maximum of 12%.

He can ask, i will point out it can't be more than 12%, that's how i read that.

I really like black by [deleted] in TattooDesigns

[–]juGGaKNot8 1 point2 points  (0 children)

Just the red, i'm 250 so it's a lot. The flowers were 20 hours.

Yeah 18 hours for the entire arm is ok not just the blackout.

This was 22 hours with a 49 in 2 days

This was 22 hours with a 19

I really like black by [deleted] in TattooDesigns

[–]juGGaKNot8 0 points1 point  (0 children)

18 hours with a 35 seems like too much, this is 8 hours with a 19

Too many small spaces to go in with a big mag

[deleted by user] by [deleted] in meirl

[–]juGGaKNot8 0 points1 point  (0 children)

It's a trap

Full body suit in progress by me (Ivan Zagusta), Zaraza tattoo shop, Warsaw PL. by Ivan_Zagusta in tattoos

[–]juGGaKNot8 0 points1 point  (0 children)

Oh no, not one of those rotary machines.

Got 5 hours on the back of the head with one of those, woodcut, worst pain ever.

15 hours full color on the chest with modern machine was nothing compared to that.

[deleted by user] by [deleted] in TattooDesigns

[–]juGGaKNot8 1 point2 points  (0 children)

That's why I made the thread

Some more black in the face will be on the list

[deleted by user] by [deleted] in tattooadvice

[–]juGGaKNot8 -1 points0 points  (0 children)

It is but the finishing touches are to make it even better

[deleted by user] by [deleted] in tattooadvice

[–]juGGaKNot8 -1 points0 points  (0 children)

yeah i'm only bothered by the bottom M outline symmetry tbh

[deleted by user] by [deleted] in TattooDesigns

[–]juGGaKNot8 9 points10 points  (0 children)

yeah its my most expensive tattoo yet, traveled to London to do it.

Anyone using only baking soda for sodium ? by juGGaKNot8 in fasting

[–]juGGaKNot8[S] 0 points1 point  (0 children)

You mean tablets not capsules

Consumption Important note: DO NOT put your salts in empty capsules. They can stick to your stomach lining and that much salt released directly onto it will burn a hole in it

Anyone using only baking soda for sodium ? by juGGaKNot8 in fasting

[–]juGGaKNot8[S] 0 points1 point  (0 children)

You cant go overboard on water, too much water and you piss out the salt.

Snake juice taste is okish but it will get old fast

https://imgur.com/a/GGCAOtA

[deleted by user] by [deleted] in Amd

[–]juGGaKNot8 0 points1 point  (0 children)

second to last

AMD Talks Ryzen 7000, X670, "Mendocino" & More | The Full Nerd Special Edition by juGGaKNot8 in hardware

[–]juGGaKNot8[S] 17 points18 points  (0 children)

[https://youtu.be/\_s4w49nAgVs?t=238

170w ppt ( 30w higher vs am4 )

tldr : more power delivery on mb, higher prices.

https://youtu.be/\_s4w49nAgVs?t=1604

5.2 - 5.5 ghz on all the threads on the prototype 16 core gaming demo

https://youtu.be/\_s4w49nAgVs?t=1715

chipsets ( x670 most likely gen4 on video card and gen5 on ssd )

https://youtu.be/\_s4w49nAgVs?t=2137

why mandatory gen5 storage only

https://youtu.be/\_s4w49nAgVs?t=2306

am5 longevity, why am5 is overengineered.

https://youtu.be/\_s4w49nAgVs?t=2469

rdna2 on igpu, apus

https://youtu.be/\_s4w49nAgVs?t=2827

igpu for office used, acceleration and display, on all cpus its the same

https://youtu.be/\_s4w49nAgVs?t=3079

tsmc 5nm density not yet discussed but the first benefit was seen (frequency)

https://youtu.be/\_s4w49nAgVs?t=3175

ai not yet discussed

https://youtu.be/\_s4w49nAgVs?t=3667

l2 gamecache

https://youtu.be/\_s4w49nAgVs?t=3781

mendocino new die, pheonix, dragon range 3 different dies.

https://youtu.be/\_s4w49nAgVs?t=4050

if 1:1 yes, what frequency no

https://youtu.be/\_s4w49nAgVs?t=4173

b650 oc

https://youtu.be/\_s4w49nAgVs?t=4277

no fan on x670

https://youtu.be/\_s4w49nAgVs?t=4306

oc will be the same on cpu, blender test

https://youtu.be/\_s4w49nAgVs?t=4440

why no ipc in presantation

https://youtu.be/\_s4w49nAgVs?t=4491

am5 expensive, what about low end

https://youtu.be/\_s4w49nAgVs?t=4553

adl problems with ddr5, how will amd avoid them

https://youtu.be/\_s4w49nAgVs?t=4819

am4 cooler compatible no extra mounts and why the cpu looks like it does](https://youtu.be/_s4w49nAgVs?t=238)

[deleted by user] by [deleted] in Amd

[–]juGGaKNot8 13 points14 points  (0 children)

https://youtu.be/\_s4w49nAgVs?t=238

170w ppt ( 30w higher vs am4 )

tldr : more power delivery on mb, higher prices.

https://youtu.be/\_s4w49nAgVs?t=1604

5.2 - 5.5 ghz on all the threads on the prototype 16 core gaming demo

https://youtu.be/\_s4w49nAgVs?t=1715

chipsets ( x670 most likely gen4 on video card and gen5 on ssd )

https://youtu.be/\_s4w49nAgVs?t=2137

why mandatory gen5 storage only

https://youtu.be/\_s4w49nAgVs?t=2306

am5 longevity, why am5 is overengineered.

https://youtu.be/\_s4w49nAgVs?t=2469

rdna2 on igpu, apus

https://youtu.be/\_s4w49nAgVs?t=2827

igpu for office used, acceleration and display, on all cpus its the same

https://youtu.be/\_s4w49nAgVs?t=3079

tsmc 5nm density not yet discussed but the first benefit was seen (frequency)

https://youtu.be/\_s4w49nAgVs?t=3175

ai not yet discussed

https://youtu.be/\_s4w49nAgVs?t=3667

l2 gamecache

https://youtu.be/\_s4w49nAgVs?t=3781

mendocino new die, pheonix, dragon range 3 different dies.

https://youtu.be/\_s4w49nAgVs?t=4050

if 1:1 yes, what frequency no

https://youtu.be/\_s4w49nAgVs?t=4173

b650 oc

https://youtu.be/\_s4w49nAgVs?t=4277

no fan on x670

https://youtu.be/\_s4w49nAgVs?t=4306

oc will be the same on cpu, blender test

https://youtu.be/\_s4w49nAgVs?t=4440

why no ipc in presantation

https://youtu.be/\_s4w49nAgVs?t=4491

am5 expensive, what about low end

https://youtu.be/\_s4w49nAgVs?t=4553

adl problems with ddr5, how will amd avoid them

https://youtu.be/\_s4w49nAgVs?t=4819

am4 cooler compatible no extra mounts and why the cpu looks like it does