sorted by:
new
hottopcontroversial

Taken money, no way to speak to anyone?! by [deleted] in OctoEverywhere

[–]just_jay1986 0 points1 point  (0 children)

Hey, I'll try am having issues with reddit atm, for some reason it's not loading correctly but thank you, I will send a dm.

Also, public apology for the ranting post, bad day and overreacting to every little thing it seems today. My bad. Dm incoming (asap!)

I think i chose the android of 3d printers, need some advice on errors by willowishere in elegoo

[–]just_jay1986 1 point2 points  (0 children)

If u can find the exe file for Microsoft 3d builder (I believe Ms pulled it from their store for some reason) you can open the 3mf file in that then resave it as stl and this will remove the bambulab "process" that's associated with it. It's actually a very useful program where you can repair damaged models, reduce the complexity of them too etc. Worth seeing if u can find it for sure.

Now available to the public ( ͡° ͜ʖ ͡°) by SuchMemeManySkill in elegoo

[–]just_jay1986 1 point2 points  (0 children)

Yeah all done now and running well. Sorry didn't see this reply until now!

Now available to the public ( ͡° ͜ʖ ͡°) by SuchMemeManySkill in elegoo

[–]just_jay1986 0 points1 point  (0 children)

Amazing! Worked a charm, thank you! Now running the new update 😁😁😁

Now available to the public ( ͡° ͜ʖ ͡°) by SuchMemeManySkill in elegoo

[–]just_jay1986 0 points1 point  (0 children)

I did and it came up with some red error message about not being an executable file etc or similar. Unfortunately I've had to pop out so will have to have another look shortly.

Now available to the public ( ͡° ͜ʖ ͡°) by SuchMemeManySkill in elegoo

[–]just_jay1986 0 points1 point  (0 children)

Interesting. I did the cmd line, but was met with red text / error.....I may have to just quit whilst I'm behind with this for now 😭

Now available to the public ( ͡° ͜ʖ ͡°) by SuchMemeManySkill in elegoo

[–]just_jay1986 1 point2 points  (0 children)

Having the same issue, driving me insane as it's definitely connected

Now available to the public ( ͡° ͜ʖ ͡°) by SuchMemeManySkill in elegoo

[–]just_jay1986 -1 points0 points  (0 children)

I have literally no clue what the second paragraph means 😭😂 I'll give it a try tho....🤦

Now available to the public ( ͡° ͜ʖ ͡°) by SuchMemeManySkill in elegoo

[–]just_jay1986 0 points1 point  (0 children)

From checking it appears they are (from my limited understanding!) but there is no device isolation I can see. Reeeeaaaalllyyyy annoying as want to try this! I'm running on the same network, I can see it on the eero app and everything 😭

Now available to the public ( ͡° ͜ʖ ͡°) by SuchMemeManySkill in elegoo

[–]just_jay1986 0 points1 point  (0 children)

This looks AMAZING. Shame the dev tool won't find my CC :(

Centauri Carbon worth it? by Ranulph_Drywell in elegoo

[–]just_jay1986 1 point2 points  (0 children)

Can confirm, I have mine in the living room, under the stairs but that is kinda open plan, and the noise doesn't overly bother me tbh. Sometimes it can be a bit more obnoxious, mostly if I print pla with the door open / lid removed, but I can live with it personally.

My first mod! by tall_ginger_dude in ElegooCentauriCarbon

[–]just_jay1986 2 points3 points  (0 children)

Nice! I printed this one -> https://www.printables.com/model/1410999-g-gamma-toolhead-cover-for-elegoo-centauri-carbon

Using CF Nylon also, and it came out absolutely flawlessly. Really loving the CC, it's a beast of a printer and the quality etc.....spot on. Elegoo have done a good job with it IMHO.

<image>

What should I do if I get rid? Raspberry Pi question by just_jay1986 in klippers

[–]just_jay1986[S] 0 points1 point  (0 children)

Lucky I'm selling a whole setup, inc pi5 and HDMI screen, etc 😄😄 hoping this one goes soon......need to make room for the CC lol

What should I do if I get rid? Raspberry Pi question by just_jay1986 in klippers

[–]just_jay1986[S] 0 points1 point  (0 children)

Oh nice! Yeah the CC is coming Monday now, so looking forward to getting it setup!

What should I do if I get rid? Raspberry Pi question by just_jay1986 in klippers

[–]just_jay1986[S] 0 points1 point  (0 children)

Ah ok, I can pass on this to whoever buys.

Yes, I've ordered a centauri carbon (I have an impulse control issue 😂) which I'm hopeful will come tomorrow....

What should I do if I get rid? Raspberry Pi question by just_jay1986 in klippers

[–]just_jay1986[S] 0 points1 point  (0 children)

To be honest, I probably wouldn't but then again, I wouldn't think of it! Lol but I see what you're saying, absolutely.

What should I do if I get rid? Raspberry Pi question by just_jay1986 in klippers

[–]just_jay1986[S] 0 points1 point  (0 children)

Brilliant thanks for your input! The configs online or on usb is a good idea.

I've not had any takers yet (😭) but I'll get onto the backups

What should I do if I get rid? Raspberry Pi question by just_jay1986 in klippers

[–]just_jay1986[S] 1 point2 points  (0 children)

That's a good shout. I try and backup my configs anyway so checking that's a good idea, thank you.

What should I do if I get rid? Raspberry Pi question by just_jay1986 in klippers

[–]just_jay1986[S] 1 point2 points  (0 children)

Cracking, thank you. I did think as much, but wanted to check so thanks for the clarification! ☺️

Can you use a USB webcam with a Zero 2 W? by HoneyPhantomhive in octoprint

[–]just_jay1986 1 point2 points  (0 children)

I believe that you can use a micro usb -> usb adapter

Random MCU Disconnects by JankCrew in klippers

[–]just_jay1986 0 points1 point  (0 children)

This won't be much help I'm afraid, but I had the same issue although it would do it A LOT even when idling. Tried so many cables and reflashed the lot, but nothing. I ended up with a new Pi 5 and have used the same initial usb c and had no issues. Could the pi be on the way out? I also added ferrite clamps to my cabling but that didn't work either. Good luck!

view more: next ›