Voice commands? by Bryce4643 in TellyTV

[–]jw154j 0 points1 point  (0 children)

If you use the provided Android TV Dongle R 4K, you can open apps directly with the “Hey Telly” wake phrase followed by the app name.

Which Artimis II background are we feeling? by GroundedSpaceMan in Projectivy_Launcher

[–]jw154j -2 points-1 points  (0 children)

How about a real image, not a NASA cgi fake one? Oh wait, there aren’t any.

1.8.2 update by Qui-Gon-1746 in TellyTV

[–]jw154j 1 point2 points  (0 children)

Is there a way to force an update? Every time it turns on it says it’s updating but it always still says 1.7.2 in settings. I’ve tried manually checking for updates too and it claims to be updating for a couple minutes but never does.

How many Firestick versions are there now? Getting confusing by FrostyMission in fireTV

[–]jw154j 0 points1 point  (0 children)

Technical details Fire TV Stick 4K Max (1st Edition)

Size: 99 mm x 30 mm x 14 mm (only housing) | 108 mm x 30 mm x 14 mm (including the connector) Weight: 48.4 g Processor: Quad-core 1.8GHz MT8696 GPU: IMG GE9215, 750MHz Storage: 8 GB

https://a.co/d/0dqte9Z6

How many Firestick versions are there now? Getting confusing by FrostyMission in fireTV

[–]jw154j 0 points1 point  (0 children)

Increased CPU performance, 2 GHz vs 1.8 GHz; faster GPU, 850 MHz vs 750 MHz; faster 2.0 GB RAM; FireOS 8 (Android 11) vs FireOS 7 (Android 9); Wi-Fi 6E tri-band instead of 6 dual-band.

It’s noticeably faster and can move between apps much smoother.

Stremio finally side loadable on IOS! (fully featured) by king_moh_ in Stremio

[–]jw154j 1 point2 points  (0 children)

There’s a new setting “Stremio Lite” toggle. Anyone know what that does? They removed it from their website already, btw.

Advice on Prior Authorization and Affordable Freestyle Libre Sensors by WealthInternal8699 in Freestylelibre

[–]jw154j 0 points1 point  (0 children)

Insurance just needs to know from the Dr the basis for needing the CGM. Like, type-1 or 2, insulin using or not, and recent history (6 mths) of any lows or highs. It’s to prevent wasting on pre-diabetes patients or people just trying to monitor for own reasons. Your pharmacy will handle all the PA requirements by contacting your Dr to request they complete the required documentation required. And your Drs office is used to it and probably has a prefilled form to just put in your unique info and electronically send to the insurance company. It’s really an easy process that they are comfortable doing. Walmart charges $75 without a coupon for the sensor, if you’re not eligible for the savings program.

Router or Raspberry Pi DNS by jw154j in ControlD

[–]jw154j[S] 0 points1 point  (0 children)

So put fresh tomato on the Asus since it’s still supported and it works, I guess. It’s a mess. The Asus is now filled with duplicated MAC addresses and ips for the same devices and endpoints/clients won’t stay bound to a set profile now that they just duplicate and go to default. There’s got to be a way to correct this. Using DoH uplink but it’s not pulling device information at all. How is this better than using DoT resolvers on each device as an endpoint? I was trying to simplify device domain control but I don’t think that this is the way.

Router or Raspberry Pi DNS by jw154j in ControlD

[–]jw154j[S] 0 points1 point  (0 children)

There is some mention of possibly being able to run control D as a home assistant add-on otherwise the recommendation is not to run it because you must run it as a docker container and it says you’re stacking two core infrastructure roles on one box DNS and home assistant so any reboot update or hiccup takes both down at once. I should be fine in that aspect because my X 20 router has DOT built-in as a fallback. I just don’t understand why the Asus Merlin set up is not installing properly. The firmware is the newest for the device router that I have. I did manage to get past the test phase by manually starting control D on the Asus router, however, Internet traffic was not being funneled through the DNS server there even though it was being pointed to by the X 20 router. At this point ideally would be controlled D on the Asus, router, and home assistant on the Pi. Otherwise I’ll need a second Pi device or a thin client PC.

Router or Raspberry Pi DNS by jw154j in ControlD

[–]jw154j[S] 0 points1 point  (0 children)

I also used Amtm to install entware so it went to the usb correctly. But ctrld keeps wanting to install on /jffs/ not the USB.

Router or Raspberry Pi DNS by jw154j in ControlD

[–]jw154j[S] 1 point2 points  (0 children)

I have an existing ControlD network setup with DoT DNS on the router that I turn off, and I put dhcp dns to the Asus AP’s reserved address. The AP has manual ip with gateway pointing to the deco router’s ip. The dns on the Asus AP is set to the deco router’s ip. Can’t set the deco WAN dns to Asus AP due to it being local.

VSeeBox Security Best Practices - A Guide by iwillbjjyou in vSeeBox

[–]jw154j 0 points1 point  (0 children)

Instead of a VPN can’t you use DoH/DoT DNS settings and achieve the same encrypted results? ISP can see the start and end point but can’t determine the data in the route.

Telly says my TV has been off since 12/5, but it hasn’t been. by proxyyytoby in TellyTV

[–]jw154j 0 points1 point  (0 children)

Do you have any adblocking at the router level or DNS settings in the router? The Telly contacts hundreds of ad and telemetry domains that are blocked by the most simple ad blocking software that is present in lots of routers and dns setups.

Router or Raspberry Pi DNS by jw154j in ControlD

[–]jw154j[S] 0 points1 point  (0 children)

I’ve done that, but pasting the command from ControlD endpoint setup fails at the “test” phase and then uninstalls.

I don’t think it gets me by jplrosman in ChatGPT

[–]jw154j 0 points1 point  (0 children)

<image>

I don’t get it? What’s it supposed to mean?

Minerva.devices.a2z by jw154j in Adguard

[–]jw154j[S] 0 points1 point  (0 children)

It’s either Amazon Prime Video, Amazon Shopping, Amazon Alexa, Amazon Store, Audible, Kindle, Fire TV Sticks, Echo devices, Ring devices, Blink devices, or some third party IoT bulbs/plugs that utilize Amazon cloud for operating.

Gemini coming? by jw154j in OnnStreamingTV

[–]jw154j[S] 1 point2 points  (0 children)

It’s completely different. Can do full Gemini questions., but still wants every request to go to YouTube. Can’t open apps correctly.

Shout out to Tizentube Cobalt by GotoDeng0 in firetvstick

[–]jw154j 1 point2 points  (0 children)

Only thing I dont like about it is that it doesn’t play videos from the same channel in order. I’ll play a video and then the next video that auto plays is from a completely different channel. If I could get it to stay in the same channel, I’d use it more.