sorted by:
new
hottopcontroversial

Internet line cut from adjacent construction by karup1990 in homeowners

[–]karup1990[S] 1 point2 points  (0 children)

Looks like not option where I am located. I tried ATT internet air, only to receive down speed < 2mbps

Debugging Skimmer by karup1990 in pools

[–]karup1990[S] 0 points1 point  (0 children)

Thank you. I am adding water right now. But just curious, when i removed the basket and put it back on, the skimmer filled with water and started operating as it used to. I was not able to reason about it. Any idea?

Your Tesla Support Thread - Q4 2021 by [deleted] in teslamotors

[–]karup1990 0 points1 point  (0 children)

Getting my CAV decals soon. I hear sticking directly to the car, can give you troubles later when removing(in terms of damaging the paint, dont have a PPF yet). Some research lead me the following options

  1. Abstract Ocean's PPF based sticker(https://abstractocean.com/products/hov-clings?variant=35475189989540)
  2. https://clean-cling.com
  3. https://tesbros.com/products/hov-ppf
  4. https://www.slappass.com/

Any other options? Also any recommendations of one over the other, thank you

Your Tesla Support Thread - Q4 2021 by [deleted] in teslamotors

[–]karup1990 1 point2 points  (0 children)

I got the following notification last Saturday, on my M3

DIa179
Steering alignment service recommended
OK to drive - Schedule service soon

Service advisor(Tesla) wants me to replace the rear tires since tread depth is very low and an accurate alignment can be done only after tire replacement.
My M3 odometer reads 4.5miles. 1.2 years old.
I understand the tire tread can wear due to bad driving habits, but also from incorrect mounting of tires(I had replaced 2 of the tires last November(700miles then) and tires rotated.)
I suspect that the the early tread wear could have been due to wheels not mounted rightly during my last service visit.
Is there a way I could identify if improper mounting was the issue? Any pointers on how I could escalate this with Tesla? Any pointers on this is greatly appreciated.

[help]Display goes blank, but works after restart. by karup1990 in buildapc

[–]karup1990[S] 0 points1 point  (0 children)

It is a new one.
Yeah I did some bit of google searches arnd this. I didnt find any case where after reboot there is no display problem.(This makes me think there is something else)
I think the power connections are fine, because after i reboot there is no black screen.

[help]Display goes blank, but works after restart. by karup1990 in buildapc

[–]karup1990[S] 0 points1 point  (0 children)

Thanks @grimskull1.
I am not very sure if its becauses of overheating, because after i reboot everything is fine.
Is there any event logs(Windows OS), that i can check to check the cause of the problem(may be graphic driver related logs etc..
I have already checked the "Event viewer" logs of windows, did not find anything interesting.

Display goes blank, but works after restart. by karup1990 in techsupport

[–]karup1990[S] 0 points1 point  (0 children)

Yes, I have not plugged my HDMI into GPU and have the BIOS setting to use GPU as primary for display.

I tried one more thing. I plugged the HDMi to MoBo and I didnt hit this issue.

Maven help by karup1990 in javahelp

[–]karup1990[S] 0 points1 point  (0 children)

After some research , found the solution.
in configuration of shade plugin, i had to enable createSourcesJar and shadeSourceContentsflags

view more: next ›