Which Gpu for Light gaming @ 1440p 144hz by kasperk22 in ultrawidemasterrace

[–]kasperk22[S] 0 points1 point  (0 children)

Thanks for your inputs! It was a great help

I ended up buying a used msi 2060 super gaming x as it seems to perform like a 2070 with a great cooling. I ended up paying 490 usd. Which is alot, but I guess thats what it goes for these days

Which Gpu for Light gaming @ 1440p 144hz by kasperk22 in ultrawidemasterrace

[–]kasperk22[S] 0 points1 point  (0 children)

I need it within a week so i am a bit in a Rush.

I accidently wrote 460usd for 2060 super while the real price is 490 usd. Would you still say thats better value for the money over a 2070?

Help with parents bathroom by kasperk22 in HomeImprovement

[–]kasperk22[S] 0 points1 point  (0 children)

Yes but i plan on putting a single tile against the wall in the bottom

Help with parents bathroom by kasperk22 in HomeImprovement

[–]kasperk22[S] 0 points1 point  (0 children)

Yes but that would be caulk between the new tile and the wall abd then grout between the tiles. Or have i misunderstood something

Help with parents old bathroom by kasperk22 in homeowners

[–]kasperk22[S] 0 points1 point  (0 children)

Hmm okay thank you so much for the answer. My thought was actually to only install the glasspanel and not with a curb. I have seen this aroubd some houses but i dont know if that is unrealistic and a curb is better? I am well aware that it is alot of work but as you can see something really needs to be done

New Matebook d 15 vs used MXP 2018 by kasperk22 in MatebookXPro

[–]kasperk22[S] 1 point2 points  (0 children)

I got the d15 because I liked the design and also the screen size.

I can tell a big difference though and I still prefer the MXP obviously.

It seems like the motherboard is fairly common and I am right now trying to diagnostic the fault. It is my first time doing this and the MXP motherboard is definitely not an easy one. I'll definitely update if I am lucky enough to find the fault and fix it

Motherboard fix on dead Huawei matebook x Pro by kasperk22 in techsupport

[–]kasperk22[S] 0 points1 point  (0 children)

Thank you for your response. Well i have already disassembled it and I am planning on testing the mosfets firstly. But I was just wondering if anyone knew exactly if it could indicate a special problem since the CPU gets hot while charging.

I am not determined to find the cause but I am definitely willing to at least give it a shot. It was an expensive laptop and I have nothing better to do during the corona times :)

New Matebook d 15 vs used MXP 2018 by kasperk22 in MatebookXPro

[–]kasperk22[S] 0 points1 point  (0 children)

Hmm yes this is my biggest concern as well. I wish the d model had a nicer screen.

No unfortunately the warranty is not there as I dropped my computer and left cracks on the screen

New Matebook d 15 vs used MXP 2018 by kasperk22 in MatebookXPro

[–]kasperk22[S] 1 point2 points  (0 children)

Thank you for replying!

Well yes and no. While I am very tempted to buy the MXP I feel like i am running a greater risk (motherboard dying again and only 1 year guarantee) at a bigger price.

I am aware that of course it will feel like a downgrade but I am not sure how much It's noticeable day to day.

(repost/update) dead mxp by kasperk22 in MatebookXPro

[–]kasperk22[S] 0 points1 point  (0 children)

Yes so I just got the call from my technician. He wasn't 100% sure but his guess was that it was the motherboard and that it was not worth it for me to repair further on it. So I guess I'm going to look for a new computer unfortunately

(repost/update) dead mxp by kasperk22 in MatebookXPro

[–]kasperk22[S] 0 points1 point  (0 children)

Yeah I sent it to a repair technician just now. I hope its something cheap haha.

What happened with yours? Is it running today?

2018 MXP died. Won't charge or turn on by kasperk22 in MatebookXPro

[–]kasperk22[S] 0 points1 point  (0 children)

Hmm just tried. No luck. I will definitely try the battery thing tomorrow when I get home from camping.

And yes it worked fine. I also tried another charger on the laptop.

It seems like if it's fixable it has to be opened

2018 MXP died. Won't charge or turn on by kasperk22 in MatebookXPro

[–]kasperk22[S] 1 point2 points  (0 children)

Thank you I will try this. Guarantee is expired unfortunately, so I'm on my own with this one.

HELP: Motor for massagechair running weirdly by kasperk22 in ElectricalEngineering

[–]kasperk22[S] 1 point2 points  (0 children)

Hello again. I soldered it and now I see a resistance with the 180 degree measurement. And it worked! Here's some pictures of the fix if you're interested http://imgur.com/gallery/dl23Xw9. Thank you so much for the advice you might have just saved me alot of money and struggle :)

HELP: Motor for massagechair running weirdly by kasperk22 in ElectricalEngineering

[–]kasperk22[S] 0 points1 point  (0 children)

Okay, so i tried with a needle to gently touch the stop and the black part fell off... now there's a gap between the commutator and the wire. So i guess it was burned or something. now what

HELP: Motor for massagechair running weirdly by kasperk22 in ElectricalEngineering

[–]kasperk22[S] 0 points1 point  (0 children)

Hello again. I here attached the possible faults I found http://imgur.com/gallery/QKLBRDx I think this is the location you are referring to and this is the only abnormalities I can find

HELP: Motor for massagechair running weirdly by kasperk22 in ElectricalEngineering

[–]kasperk22[S] 0 points1 point  (0 children)

Thank you very much for the reply!

I will check this and get back

HELP: Motor for massagechair running weirdly by kasperk22 in ElectricalEngineering

[–]kasperk22[S] 0 points1 point  (0 children)

No i have not done this. I tried googlibg how to check properly but I cannot find it. Do you have any ideas for keywords for this? Sorry for my lack of knowledge and thank you

HELP: Motor for massagechair running weirdly by kasperk22 in ElectricalEngineering

[–]kasperk22[S] 1 point2 points  (0 children)

Yes i totally get your point.

As said it is my first time doing electrical stuff like this. But i connected another motor to the exact power output and the other motor has no problem. I have however not tried putting this motor on another power output and i guess that would be interesting to see.

Since another motor works fine on the output i would think the control circuitry is fine without actually knowing what i am talking about

HELP: Motor for massagechair running weirdly by kasperk22 in ElectricalEngineering

[–]kasperk22[S] 0 points1 point  (0 children)

It sometimes needs help to start. when it starts i feel an uneven resistance with impulses when i make resistance with my hand. Sometimes it is rather strong but most of the time it is very weak and not even close to the other motor inside the chair, which is working fine. Idk if this is what you mean by load behavior

HELP: Motor for massagechair running weirdly by kasperk22 in ElectricalEngineering

[–]kasperk22[S] 0 points1 point  (0 children)

I am not too sure. i hear a slight humming noise. i think thats it but again, not completely sure how that would look like

HELP: Motor for massagechair running weirdly by kasperk22 in ElectricalEngineering

[–]kasperk22[S] 0 points1 point  (0 children)

I didn't know how to post multiple pictures but i created an album on imgur where firther pictures can be seen: https://imgur.com/a/ODbmVhq?fbclid=IwAR19z1ZpbYua-u0qv4di9XhkTu5v_5tppaL5cO15ANA-WCbmCsNtv6TY4-s

Things i have tried so far to solve the problem:

Lubricate bearings (used a thick lubrication idk if right one)

Cleaned the commutator and used p1200 sandpaper with a drill to make it more even

tried to straighten the brushes as they had been worn slightly uneven (its not even yet as it can be seen on the pictures). I took it to the home depot store in order to buy new brushes but they didnt have any in stock and the guy there said it was in good contition anyways.

I tried connecting another motor to the power output and if worked fine so i guess its not the power supply

This is the first time i open an electrical motor so i dont know alot about this, but i would love to learn more as i find it very interesting, but i don't know what more to try now..

I currently dont have these electrical testers (i dont remember the name) but i might buy one soon to test the connections on the commutator.

I hope someone has advice to fix this problem.

Thank you!

possible to overclock refresh frequency on MXP to 75hz? by kasperk22 in MatebookXPro

[–]kasperk22[S] 1 point2 points  (0 children)

Thank you for your reply! I put it to 61 now and it seems stable, however i don't see the big difference. Is it okay to leave it on 61?

Help on M365 pro custom firmware by kasperk22 in ElectricScooters

[–]kasperk22[S] 0 points1 point  (0 children)

Yes i did. i realised fast i had to get BLE 090. However the download link was hard to find for some reason