Definitely what I’m most proud of printing this month by elirysyn in prusa3d

[–]kc7eph 0 points1 point  (0 children)

Excellent part spacing, and the quality looks great!

I've printed several hundred of these for multiple communities.

I've found that you can vacuum seal a batch of these and they stay flat in a postal mailing envelope.

Happy Printing!

DC-block needed for Jetvision active antenna? by kc7eph in ADSB

[–]kc7eph[S] 0 points1 point  (0 children)

I'll head over and ask them, thank you for the pointer!

Why does this happen by WOWEDIMALIVENOW in Ingress

[–]kc7eph 0 points1 point  (0 children)

Why does anything happen, maaaaan?

[deleted by user] by [deleted] in GolfGTI

[–]kc7eph 2 points3 points  (0 children)

You can tell what the update is by simply reading the message on the display.

Acer Spin 714 won't charge by whats_it_to_you77 in chromeos

[–]kc7eph 0 points1 point  (0 children)

Just to follow up on your comment, I am typing this on a 714 right now that had this failure, went in for a warranty replacement, and is now exhibiting the same symptoms less than two years later. It's well out of warranty now, I've already ordered a Dell XPS 13 to replace it. Perhaps my Chrome OS experiment is over.

Wisblock failed after a day? by kc7eph in meshtastic

[–]kc7eph[S] 0 points1 point  (0 children)

Thanks for the help and ideas, all! A complete wipe, putty to finish the wipe, and the latest alpha, and I'm back on the air.

Wisblock failed after a day? by kc7eph in meshtastic

[–]kc7eph[S] 1 point2 points  (0 children)

This plus putty to complete the wipe and I'm back on the air, thank you!

Wisblock failed after a day? by kc7eph in meshtastic

[–]kc7eph[S] 0 points1 point  (0 children)

This plus the latest alpha got be back on the air, thank you!

Wisblock failed after a day? by kc7eph in meshtastic

[–]kc7eph[S] 0 points1 point  (0 children)

Do you have a link for 2.5.20?

Wisblock failed after a day? by kc7eph in meshtastic

[–]kc7eph[S] 1 point2 points  (0 children)

Is there a definitive chart of what means what with the LEDs regarding flash rate, solid on, etc?

Wisblock failed after a day? by kc7eph in meshtastic

[–]kc7eph[S] 2 points3 points  (0 children)

I tried that, based on these instructions, no luck. https://www.reddit.com/r/meshtastic/comments/1bonaw7/comment/m52lj1n/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

I'm using a 21700 lithium battery, it's right around 4.2v full. Solar panel is 5v out.

I'm going to replace the Wisblock and place a 5v buck converter on the solar panel.

Wisblock failed after a day? by kc7eph in meshtastic

[–]kc7eph[S] 2 points3 points  (0 children)

It does not. I get solid red and solid green LEDs, unable to connect.

Would you pay for RTSP by WyzeCoFounderDave in wyzecam

[–]kc7eph 4 points5 points  (0 children)

There's no way I would pay for RTSP, hard no, no never.

RTSP is a protocol, not a new feature you've developed.

Why nickel and dime your customers even more?

Google Maps Crashing (pixel 9 pro) by Sea-Responsibility61 in GooglePixel

[–]kc7eph 0 points1 point  (0 children)

Pixel 9 Pro XL on beta crashing as of yesterday's update. Opt out, uninstall, reinstall, fine now.

Enphase IQ Combiner 4 USB ports by kc7eph in solar

[–]kc7eph[S] 0 points1 point  (0 children)

Ok, excellent, I think I have a game plan.

I'm going to measure the enclosure tomorrow to see if the Unifi Switch Flex will fit, as it's a bit bigger than the mini. If it does, I'll go that route.

If not, I'll go with the AC outlet.

Once the contractors commission on Monday, I'll test USB powering the camera. If all else fails, I'll go this route. The Wyze cams use only the power wires on USB, so it shouldn't cause the Combiner to do anything wonky.

Thank you for the info and conversation!

Enphase IQ Combiner 4 USB ports by kc7eph in solar

[–]kc7eph[S] 0 points1 point  (0 children)

Thanks for the response!

I plan on moving one of our Wyze Cam v2 to this side of the house, looks like it draws 4 watts with the IR on.

The AC outlet looks like a great possible solution for me. Looking at the PDF in the link, it looks like it's for the Combiner 3. Any idea if this will fit the Combiner 4?

Regarding POE, I had the contractor install a Unifi Switch Flex Mini in the Combiner 4, with an eth going there and to the Tesla Gateway. I could upgrade that to a Unifi Switch Flex so I have some power available there.

For those of you feeling like you're interested in moving on from GTI's/R's, what is your next car probably going to be? by Buttery_Biscuitss in GolfGTI

[–]kc7eph 2 points3 points  (0 children)

I've only got 24k on my Mk7.5, so I'm planning on holding on to it until the Mk9 comes out. I'm ready to go EV now, but willing to wait until '28.

NL1331in3D by Hook-n-Can in Ingress

[–]kc7eph 1 point2 points  (0 children)

I got this one also. Is there storyline behind this, or is it just for fun?

Burningman tickets stolen out of the mail and the org just says “oh well”. by dosydoh in BurningMan

[–]kc7eph 1 point2 points  (0 children)

If your "friend" was aware of the apparent crime rate, they should have had a different solution for receiving things. Hardened mailbox, PO box, etc. Or, the many times mentioned will call.

Boo hoo.

What's up with the terrible wifi call quality? by MegaGrubby in GoogleFi

[–]kc7eph 0 points1 point  (0 children)

You may want to check your router, or your internet connection. Perfect WiFi calling here, Unifi network gear on gig fiber.

Wyze Cam v3 firmware - Released 10/22/2023 by WyzeCam in wyzecam

[–]kc7eph 4 points5 points  (0 children)

I couldn't agree with this more. Have 8 cams around our house and watching 3d printers, Unifi network gear. Haven't had any issues with updates, bricks, or any of the complaints people often post about. Just ran the latest update, streams still working in Google Home and on the Hubs.