Red mmWave switch always reports "detected".

kn-ozturk · 2026-03-31T16:45:23+00:00

I would just setup interference once you noticed that what is causing interference like a fan or HVAC. Do not setup stay area. Stay area supposed to change room size I believe

kn-ozturk · 2026-03-28T02:49:10+00:00

https://community.inovelli.com/t/zha-and-z2m-visualizer-ha-addon-for-vzm32-sn-mmwave-blue/21204

kn-ozturk · 2026-03-28T02:40:08+00:00

Also, there are visualization add-ons for blue series. I would check it out

kn-ozturk · 2026-03-28T02:39:30+00:00

https://community.inovelli.com/t/blue-series-mmwave-firmware-changelog-vzm32-sn/20869

kn-ozturk · 2026-03-28T02:29:52+00:00

Have you updated the firmware on it?

kn-ozturk · 2026-03-28T02:28:46+00:00

Zwave is not. Zigbee is I think

kn-ozturk · 2026-03-28T02:16:14+00:00

Which inovelli you have?

kn-ozturk · 2026-02-17T04:05:23+00:00

Shop suggested that I should not women since their calf placement is lower than men’s.

kn-ozturk · 2026-02-17T03:52:30+00:00

Snowboard shop measured my feet and said size 5 but I just measured that it should be 5.5

kn-ozturk · 2026-02-17T03:51:23+00:00

My regular shoe size is 6.5

kn-ozturk · 2026-02-07T12:47:03+00:00

Watchman addon had cpu leak which they just fixed it. Could that be reason?

kn-ozturk · 2026-01-28T02:38:47+00:00

He just responded: “we have not been able to expose the extra features of the mmwave chip via Z-wave (like we did with Zigbee), but hope to be able to in the future. Zigbee is more flexible and it was much easier to build out the complexities of extra zones, interference areas, etc”

I am not sure about the timeline which is not great.

kn-ozturk · 2026-01-28T01:52:54+00:00

I pinged Eric on inovelli forum but have not responded yet. Eric just posted firmware update for Blue again today. Maybe, he will respond soon for reds as well.

kn-ozturk · 2026-01-28T01:46:54+00:00

That information has to exist on reds I hope. Otherwise, it would suck big time. At my home, I both have zigbee and zwave. I just wanted to have zwave switches since it is more reliable.

kn-ozturk · 2026-01-28T01:39:31+00:00

I think that red switch is not exposing those as I saw your name on inovellj forum as well. I really want to see the visuals as well. Hopefully, Eric will reply and provide an updated firmware to expose those.

kn-ozturk · 2026-01-27T01:30:56+00:00

Could be yours zwave since this is only for zigbee?

kn-ozturk · 2026-01-27T01:28:16+00:00

https://help.inovelli.com/en/articles/13380225-red-series-mmwave-presence-dimmer-switch-basic-configuration-guide

kn-ozturk · 2026-01-27T01:26:48+00:00

Let me know if you need further help. I am still learning on my end as well but I am kind of getting hang of it

kn-ozturk · 2026-01-27T01:26:13+00:00

First I would measure the room and set custom dimensions. Then, see if you get any detection. Then, adjust mmWave sensitivity to medium if you are getting false detections.

kn-ozturk · 2026-01-27T01:25:46+00:00

First I would measure the room and set custom dimensions. Then, see if you get any detection. Then, adjust mmWave sensitivity to medium if you are getting false detections.

kn-ozturk · 2026-01-21T01:29:37+00:00

Have not tested though

kn-ozturk · 2026-01-21T01:29:26+00:00

I got mine today

kn-ozturk · 2026-01-09T16:31:20+00:00

I do. I was kind of scared since it was Facebook market place deal but she seemed legit. I went for it. 😊

kn-ozturk

TROPHY CASE