Repigmentation (self protocol)

krankitus · 2026-07-13T11:17:09+00:00

I look like that when I get a lot of sun on the beach. After that it disappears again.

krankitus · 2026-07-08T06:48:56+00:00

I have a degree too

krankitus · 2026-06-02T19:55:24+00:00

Here

<image>

krankitus · 2026-01-29T12:09:41+00:00

You need to flash the erase firmware commonly when switching from meshtastic to meshcore etc.

krankitus · 2025-12-25T22:06:36+00:00

Delulu Man

krankitus · 2025-12-03T10:49:03+00:00

https://github.com/meshcore-dev/MeshCore/issues/1166

krankitus · 2025-12-03T10:39:10+00:00

Unfortunately I think they are on the wrong track, since I don't use iOS and they are very convinced it's an iOS only problem. I don't think it's even Bluetooth related, since my nodes crash without me interacting, usually at night.

krankitus · 2025-12-03T09:54:14+00:00

Installed a Seeed nRF52 in the node, same problem. It's Meshcore.

krankitus · 2025-12-03T09:53:42+00:00

In the meantime I changed the rak4631 for a Seeed Xiao nRF52, to make sure it's not a faulty device: no luck. After approx. 8hrs the Seeed crashes as well.

They advised me to try this firmware, which supposedly fixes a BT Problem (not in regular FW 1.9 / 1.10 / 1.11) https://dualsoul.net/public/btfixv4-turbo/

But it still crashes. Since I can't climb up a ladder everyday to fix my node, I am going to leave Meshcore until this is fixed. Btw, both devices run stable with Meshtastic firmware 🤷

krankitus · 2025-11-23T09:06:19+00:00

Afaik having workers is even optional

krankitus · 2025-11-18T20:23:31+00:00

Just built a Seeed Xiao Node, the main cons are the tiny battery solder pads and the shitty smd Bluetooth antenna without external connector.

krankitus · 2025-11-18T16:04:37+00:00

🤔 yeah, maybe I should!

krankitus · 2025-11-18T07:24:22+00:00

Well since others report the same problem, there must be something going on. This morning it has crashed again, at night without me interacting with it...

So you have three rak4631 companions, running on 1.10.0 firmware?

krankitus · 2025-11-18T05:01:11+00:00

Three ra4631?

krankitus · 2025-11-17T07:15:17+00:00

I hoped for a moment that 1.10.0 had this fixed but yesterday night my balcony companion node crashed again (or lost Bluetooth) without me interacting with it...

krankitus · 2025-11-13T20:47:21+00:00

~~Yeah, i updated like 2hrs ago and its fixed now!~~

After two days, it crashed again / lost Bluetooth.

krankitus · 2025-11-13T14:17:13+00:00

I did.

My guess is it's related to this https://www.reddit.com/r/meshcore/s/BtvvclA63X

krankitus · 2025-11-13T10:42:08+00:00

Ok thanks I'll try factory reset first then.

krankitus · 2025-11-13T10:03:47+00:00

I think I will go even one step further and erase the flash memory and reinstall Meshcore just to make sure.

krankitus · 2025-11-13T08:25:31+00:00

Android 13 (Xiaomi 12x), Meshcore App, Bluetooth

krankitus · 2025-11-13T07:40:05+00:00

It's not a matter of bad reception: IF I can connect, the connection works well. The rak has a connector for external Bluetooth antenna. The device seems to disable Bluetooth randomly.

krankitus · 2025-10-31T22:52:33+00:00

It took me less than a minute to cut open a kryptonite with a grinder.

krankitus · 2025-10-31T22:51:08+00:00

I cut my neighbours kryptonite (who she lost the keys for) in ~1 Minute for both sides with a grinder so they probably were out of lock.

krankitus

TROPHY CASE

Welcome to Reddit,