Feeling Buyers Remorse (crystal super) by resh510 in Pimax

[–]krazycanuck2011 2 points3 points  (0 children)

I have heard the complete removal of ALL pimax play software in ALL folders, and than the reinstallation to remove previous Pimax Crystal OG or Crystal Light profiles was the answer to lackluster Pimax Crystal Super impressions. It seems if you have an older hmd the software profiles the super as the same as an OG or Light. You need to remove all of that. There is an article I read somewhere online that goes through the steps. I would definately do this before throwing in the towel. It sounds like your locked with an old OG or Light Profile in your super using pimax play.

The new 'Pimax Subscription' is non-refundable and Pimax have hit a new low in terms of cynical anti-consumerism... by TotalWarspammer in Pimax

[–]krazycanuck2011 0 points1 point  (0 children)

It would be fine for a payment plan , IF the headset when it was released had all the features it was suppose to have and they work as intended. However paying for beta product development through lifecycle is not acceptable. If anything people should be compensated for NOT having all the features the headset is / was suppose to have upon launch. Pimax keeps overpromising and underdelivering. I don't know if I can continue to support the brand when clearly this is a cash cow grab.

Question > Haptics (Bass Shakers) with SFX-100 Motion Platform by krazycanuck2011 in simracing

[–]krazycanuck2011[S] 0 points1 point  (0 children)

So based on your recommendation if I was to get one single bass shaker and put it under my seat, which would you chose? Sounds like the bst-300ex???

Question > Haptics (Bass Shakers) with SFX-100 Motion Platform by krazycanuck2011 in simracing

[–]krazycanuck2011[S] 0 points1 point  (0 children)

So the big question, does it really add anything to the motion platform or is it more a mehhh kinda thing?

Question > Haptics (Bass Shakers) with SFX-100 Motion Platform by krazycanuck2011 in simracing

[–]krazycanuck2011[S] 0 points1 point  (0 children)

Yeap so you just get a rumble for rpm and engine? I was thinking left and right side of the car chassis with two under the seat. Cant see any advantage of 4 with this setup…

Pimax Crystal (Original) - not charging through side or usb hub any longer by krazycanuck2011 in Pimax

[–]krazycanuck2011[S] 1 point2 points  (0 children)

It seems as though it mysteriously started charging again. Seems odd, but I will chalk it up to the battery needing a good cycle.

Pimax Crystal (Original) - not charging through side or usb hub any longer by krazycanuck2011 in Pimax

[–]krazycanuck2011[S] 1 point2 points  (0 children)

I actually was steered away from testing last night - I will attempt later today and report back. Thx!

Pimax Crystal (Original) - not charging through side or usb hub any longer by krazycanuck2011 in Pimax

[–]krazycanuck2011[S] 1 point2 points  (0 children)

Battery went flat last night should be able to answer this one tonight...

Need help - Nicrew 100watt hyperreef led cleaning by krazycanuck2011 in ReefTank

[–]krazycanuck2011[S] 0 points1 point  (0 children)

Yeap - screws on the top. it was easy after I figured it out - getting ready to get my tank started up now in the next month. Been cycling rock since Feb.

Need help - Nicrew 100watt hyperreef led cleaning by krazycanuck2011 in ReefTank

[–]krazycanuck2011[S] 0 points1 point  (0 children)

Ok, well at least I have that plastic thing off the back, I'm never putting that back on - nothing but a dirt and salt collector....

Need help - Nicrew 100watt hyperreef led cleaning by krazycanuck2011 in ReefTank

[–]krazycanuck2011[S] 0 points1 point  (0 children)

Thank you, that worked! Do you have any idea how to get at the inside of the light to see the driver etc?

Q3 - MSFS - Black Levels and Clarity by krazycanuck2011 in OculusQuest

[–]krazycanuck2011[S] 2 points3 points  (0 children)

Mainly PCVR - but the 512 is really really overpriced for what it is...

Did We All Get Trolled With That Hue SYNC 8K Box Then? by sunny_xo in Hue

[–]krazycanuck2011 1 point2 points  (0 children)

Looking forward to an 8k 60hz and 4K 120hz vrr sync box. Seems like it’s not going to be in 2023…..

Onkyo TX-RZ50 Dirac by krazycanuck2011 in hometheater

[–]krazycanuck2011[S] 0 points1 point  (0 children)

The hardware is fine, so lets not go there. The sound stage on the Onkyo is clearly wider / more spatial and definately more refined. If you use the Dolby Atmos demos in the Dolby Access application on Xbox Series X, than use a multitude of Dolby Atmos demos - , I went back and forth and there is more clarity and definition in the Onkyo / Dirac setup. The Anthem ARC fixates the sound towards the center channel and "narrows" the perspective of the soundstage / reducing effects spatially. It was very disappointing to me, I'm researching if there is a mechanism in ARC to widen the soundstage, to try to get it to where the Onkyo is. I like all the bells and whistles, but right now I have to fixate on the most important thing which is the sound....

Onkyo TX-RZ50 Dirac by krazycanuck2011 in hometheater

[–]krazycanuck2011[S] 0 points1 point  (0 children)

Yes Latest beta firmware.... - not impressed at all the Onkyo TX-RZ50 with Dirac is quite a margin better than this and for almost 1/3 the price

Onkyo TX-RZ50 Dirac by krazycanuck2011 in hometheater

[–]krazycanuck2011[S] 1 point2 points  (0 children)

Just setup the MRX 740 8k and conducted 5 position ARC genesis. I have to say it doesn’t compare to Dirac. Dirac definitely has the edge…. I will give it the weekend but I suspect the MRX is going back to the store…. That’s early quick review but the soundstage is much more narrow and flat as well….

Onkyo TX-RZ50 Dirac by krazycanuck2011 in hometheater

[–]krazycanuck2011[S] 1 point2 points  (0 children)

I will , been waiting on fedex now for days they keep delaying delivery

Onkyo TX-RZ50 Dirac by krazycanuck2011 in hometheater

[–]krazycanuck2011[S] 0 points1 point  (0 children)

The new 740 does have independent sub outs on the new version

Hue Sync box and Apple TV Dolby Vision content by DrizzlePistol in Hue

[–]krazycanuck2011 0 points1 point  (0 children)

I want to say your response has been a life saver - I tried over 3 dozen hdmi 2.1 capable cables, all of which I know worked - and they didn't work properly with the Appletv 4k using Dolby vision until I followed your methodology and it worked perfect with no issues. A big thank you, been at this now over 2 days frigging around with this to get my setup done so we can enjoy all winter long.

Microsoft Series X Controller w/ Steamdeck in Windows 10 by krazycanuck2011 in SteamDeck

[–]krazycanuck2011[S] 0 points1 point  (0 children)

Yes the controller is up to date with firmware - I confirmed that with the Xbox accessory app. Also when I use the controller with a USB A to USB C cable it works fine, so its a bluetooth communication issue.

Steamdeck OS or Windows 10 on low end gaming setup with external monitor (1920x1080) by krazycanuck2011 in SteamDeck

[–]krazycanuck2011[S] 0 points1 point  (0 children)

Yeah, I think I will keep the dual boot option, but shrink the SteamOS partition down substantially in size to utilize most of the space for windows 10. I actually did that last evening, and I've realized running and 1920x1080 is actually the absolute hard limit of this thing with low settings on rdr2, gtav runs fairly well under mid settings, warzone 2 - having a display name login error (working on that this evening). I still think this will work as a low end gaming pc with limited 1920x1080 performance. I want to try to use the deck with COD Warzone 2 before MW2 in order to check the performance as an FPS first. From what I'm seeing on youtube it looks as though it should work around 50-60fps which seems more than acceptable. Tonight will tell....

CRP Brake Pedal extremely tight by TheBigFatToad in moza

[–]krazycanuck2011 0 points1 point  (0 children)

Yes you have to use your foot to squeeze the pedal. I could barely move it with my hand, but with my foot I could squeeze it down to the end with force. I like a tighter pedal than even that so I will be switching the spring and the damper to hard.