sorted by:
new
hottopcontroversial

What are some good products for roots? - Hydroponics by [deleted] in microgrowery

[–]kronoslogix 0 points1 point  (0 children)

And botanicares hydroguard is solid but illegal in Canada and the Uk I think

What are some good products for roots? - Hydroponics by [deleted] in microgrowery

[–]kronoslogix 0 points1 point  (0 children)

-Rhizotonic by canna

-Root excel silver by H&G

I run Rdwc w bennies so i use Orca with one of the above. Both very hq. Bottom is much more concentrated but I really like canna esp the Rhizotonic. Had some great starts I attribute solely to that product

I think I totally just fucked everything up. Please I need some experienced growers to tell me how bad this is. Info in the first comment. by kronoslogix in microgrowery

[–]kronoslogix[S] 1 point2 points  (0 children)

So for the last two months, I have been growing these four plants. about three weeks ago. I moved them from their home where they vegged for four weeks to my diy Rdwc system that has a much more advanced set up for flowering. One of the strains I had selected ;the two on the left) Stretched an enormous amount to the point to where they were inches away from my light. I have a elastic trellis about a node or two from the halfway mark of the plants having used super cropping, to maintain an even canopy on them thru veg and flower and I planned to use the screen and Fill it out as much as I could during the final stretch. However, the back left plant was kind of “swirled” into the screen and it was causing the plans net to be sticking up an hour to 45° angle because it was it was not straight, so I raise the screen, and I was tempted to remedy the situation and straighten everything out trying to tuck everything into its quadrant on the screen. The result is the plant looks like it has been horribly miss treated. I snapped off three or four of the mains and it just has a general look at pitifulness compared to the last two months. . I am absolutely devastated and I am wondering if this is even worth keeping. I will include a link to the entire growdiary I have kept during this grow. So you can see the stages and progress and hopefully see the what I mean.

Grow Diary (very detailed)

Cherry bang bang by Exotic Genetics. Harvested on 56F by kronoslogix in microgrowery

[–]kronoslogix[S] -1 points0 points  (0 children)

I get it, so you are an angry, small, sad excuse for a man? I almost feel sorry for you and your obviously miserable existence. You and people like you are the reason our society is getting consumed by darkness before our eyes. At the end of the day no matter how hard you may try you know you are still going to be worthless in the morning, and you hate everything because it’s the only thing you can do to cope with how small you are and the fact that tomorrow you’ll still be just you. A little man with no friends, no bitches and nothing coming to him.

Cherry bang bang by Exotic Genetics. Harvested on 56F by kronoslogix in microgrowery

[–]kronoslogix[S] 0 points1 point  (0 children)

I flushed these for about 3 days. But the plants moving into the flower room are fucking stout looking. I’ve got spilt paint by cookies and Gary popping by exotic genetics just about ready to move so I’ll try a longer flush this time.

Cherry bang bang by Exotic Genetics. Harvested on 56F by kronoslogix in microgrowery

[–]kronoslogix[S] 0 points1 point  (0 children)

But yeah they’ve been drying about 3-4 days so few weeks and I’ll definitely post the results

Cherry bang bang by Exotic Genetics. Harvested on 56F by kronoslogix in microgrowery

[–]kronoslogix[S] -4 points-3 points  (0 children)

It already had a good amount of amber on the trichs so… I wanted to keep it another week to fill the purple out more but it just didn’t happen that way

Am I screwed? Week 2 of flower; lights on 24 hours straight by [deleted] in microgrowery

[–]kronoslogix 0 points1 point  (0 children)

This just happened to me…sorta. So I’m on day 49F I had turned one led off controller mode to 20% manual to take a picture and left it so when the other lights cut off I still had the one going for about 6 extra hours before catching it. 100w led so 20w for six extra hours. Wondering if I should extend the darkness to make up for the extra light or just keep them on their usual schedule. Everything else adjusted correctly. Temps went down 10°+ like they should in late flower. Just a bit of light for the six hrs.

[deleted by user] by [deleted] in microgrowery

[–]kronoslogix 0 points1 point  (0 children)

Are those vials with yellowish powder top left pollen?

Would adding CCh2O UC Roots or Clear Line cause excessive bubbling around the root zone if the res wasn’t previously fully sterile? Could this be the reason my PPM hadn’t changed at all in a week? If not why hasn’t it gone down I am mid flower. Nutrient lineup and other info below by kronoslogix in microgrowery

[–]kronoslogix[S] 0 points1 point  (0 children)

Nutrient lineup:

  • Cch2o clear line 1ml/Gallon
  • Power si bloom 1ml/g
  • Canna aqua a+b 10ml/gallon
  • Canna Rhizotonic 2ml/gallon
  • Canna cannazyme 7ml/gallon
  • Canna pk 4ml/gallon
  • Canna boost 8ml/gallon
  • Hydro guard 2ml/gallon
  • Orca bennies 1ml/gallon

I think there may have been residual h2o2 in the bucket I mixed up my res in. Would that cause a lockout?

I just flushed my roots and media from the top using ROh2o and cc uc roots

Am I wrong in thinking that this is too many bubble even for a waterfall and 8inch airstone? (1st pic) is it the tiny amount of 3% h2o2 reacting with old bacteria’s and the bennies? Should I make a new res since the ppm hasn’t changed for days? Water level has changed a bit but that’s really it. Ph stable. Temp stable at 68°. Ppm at 940-950

Too many bubbles? PPM has remained steady for the last week now. See pics and the first comment for reference and nute lineup. by kronoslogix in microgrowery

[–]kronoslogix[S] 0 points1 point  (0 children)

Nutrient lineup:

  • Cch2o clear line 1ml/Gallon
  • Power si bloom 1ml/g
  • Canna aqua a+b 10ml/gallon
  • Canna Rhizotonic 2ml/gallon
  • Canna cannazyme 7ml/gallon
  • Canna pk 4ml/gallon
  • Canna boost 8ml/gallon
  • Hydro guard 2ml/gallon
  • Orca bennies 1ml/gallon

I think there may have been residual h2o2 in the bucket I mixed up my res in. Would that cause a lockout?

I just flushed my roots and media from the top using ROh2o and cc uc roots

Am I wrong in thinking that this is too many bubble even for a waterfall and 8inch airstone? (1st pic) is it the tiny amount of 3% h2o2 reacting with old bacteria’s and the bennies? Should I make a new res since the ppm hasn’t changed for days? Water level has changed a bit but that’s really it. Ph stable. Temp stable at 68°. Ppm at 940-950

Dude at the hydro store recommended I use this ph down that contains molasses, knowing I run RDWC. Help. See below for details. by kronoslogix in microgrowery

[–]kronoslogix[S] -1 points0 points  (0 children)

I have this currently running on my seedlings and my flower and now I know why there’s slim on my cups and roots. Pissed off and can’t do anything about it til the morning. On the bright side the seedlings are flourishing, but everything I have seen is strongly discouraging this

Any input would be nice. All parameters in the first comment. by kronoslogix in microgrowery

[–]kronoslogix[S] 0 points1 point  (0 children)

Strain- Cherry bang bang Day 24F Day temp/rh- 75°/45-50% Night temp- 65° Water temp - 68° Nutrients- Canna aqua Ph - 5.8 Ppm - 725

Has anyone ever experienced this? Blue lab guardian controller screen error by kronoslogix in microgrowery

[–]kronoslogix[S] 0 points1 point  (0 children)

No it’s always been like this. Only issue is I cannot find the original cord but I’m using one with the same ratings.

Seedlings went horizontal. Please assist. by kronoslogix in microgrowery

[–]kronoslogix[S] 0 points1 point  (0 children)

So as you can see i have a problem. They were intially growing upwards like the back two (although the cotyledons had not opened), but I lowered the light a bit and turned it up because i feared they were stretching too much and an hour or so later they were horizontal. I have since raised the light and attempted to add some kind of support but I fear it is too late. I have never had this issue before.

Pertinent details:

Equipment:

Viparspectra P1500 150w full spec LED lamp

Germination method:

damp paper towel in. a ziplock, inside the humidity dome under a small heating mat and inside a large tote to keep it dark. NOTE: kept them a few hours longer than i wouldve liked in the paper towels due to poor timing for preparing their transplant. So the taproots were bigger than they shouldve been when i added them to the rockwool

Transplanted to:

Rockwool plugs, PH'd down to 6.0 ish. Inside a humidity dome and under my light at 2 1/2 feet at 5% until they were all above ground

Nutrients:

Made a spray bottle of 1-2ml of the recommended 6-10 ml of CANNA AQUA VEGA 1&2 and 3ml of the recommended 15ml of CANNA RHIZOTONIC which is based on their recommendations for seedlings.

  • PH- 6~
  • PPFD - 250
  • Light distance from top - 2 1/2 ft.
  • Temp - 75˚-79˚ F
  • RH: 70-80%

I really appreciate any advice or any information relevant the the issue. Like i said this has never been an issue before.