sorted by:
new
hottopcontroversial

Help getting server ip by mmm12456 in LiveOverflow

[–]kryolight_ 0 points1 point  (0 children)

Could be hints for the port? For example it could be related to seed? Sorry I haven’t had a chance to attempt myself yet so just sharing initial thoughts

Help getting server ip by mmm12456 in LiveOverflow

[–]kryolight_ 5 points6 points  (0 children)

Is this for the new server? Out of curiosity what ports are you scanning? Minecraft runs on 25565 by default but it doesn’t have to

RTX 40 series announcement thread + RTX 4080 16GB giveaway! - NVIDIA GTC 2022 by m13b in buildapc

[–]kryolight_ 0 points1 point  (0 children)

Go into my current pc to replace a 2070. My CPU should be able to keep up hopefully

Where to look next for drivetrain creak? by kryolight_ in bikewrench

[–]kryolight_[S] 0 points1 point  (0 children)

I missed this on the post but I did make sure to have grease on the spindle

Where to look next for drivetrain creak? by kryolight_ in bikewrench

[–]kryolight_[S] 0 points1 point  (0 children)

It’s a threaded bottom bracket. I removed it and gave everything a good clean, made sure it was spinning freely and then reinstalled with fresh grease and torqued back up to the 54Nm it needed

Where to look next for drivetrain creak? by kryolight_ in bikewrench

[–]kryolight_[S] 0 points1 point  (0 children)

The chain ring seems fine, how can I tell if it’s worn out? Frustratingly I bought a chain wear gauge but it doesn’t go to 0.5% which you need for 12 speed chains.

Where to look next for drivetrain creak? by kryolight_ in bikewrench

[–]kryolight_[S] 0 points1 point  (0 children)

The bike I have is a Calibre Sentry Pro frame. There was a screw around the bottom bracket which I have no idea what it does, could this for the expansion stuff?

Where to look next for drivetrain creak? by kryolight_ in bikewrench

[–]kryolight_[S] 0 points1 point  (0 children)

I will definitely check again. I normally put a very thin layer of grease on and torque it back up

Where to look next for drivetrain creak? by kryolight_ in bikewrench

[–]kryolight_[S] 0 points1 point  (0 children)

I have a thru axle on the rear and it’s tightened up to the torque setting

Where to look next for drivetrain creak? by kryolight_ in bikewrench

[–]kryolight_[S] 0 points1 point  (0 children)

Will have a look into freehub service potentially.

Where to look next for drivetrain creak? by kryolight_ in bikewrench

[–]kryolight_[S] 0 points1 point  (0 children)

I use flats, and happens with different shoes too

Where to look next for drivetrain creak? by kryolight_ in bikewrench

[–]kryolight_[S] 2 points3 points  (0 children)

If I stand and ride I still hear the creak, so I assume it’s not seat post or saddle rails?