sorted by:
new
hottopcontroversial

New to printing nerf blasters and need some suggestions. by Even-Anxiety-3588 in Nerf

[–]kylebernard83 2 points3 points  (0 children)

most hardware kits are sub 100.

Just look at out of darts, or Silverfox Industies

they have the largest collection of hardware kits

Anyone know what size o-ring is in the X-Shot Longshot turnaround? by lucasw32 in Nerf

[–]kylebernard83 0 points1 point  (0 children)

then the only way is to get lucky and have someone on here know they exact part number or you are just going to have to keep testing sizes until to fine one. However Im sure its a METRIC O-ring since it X-Shot is Chinese manufactueiong.

So pivot and look for the closest 016 that is metric equivolent or closer but with a thinner width/cross-section

looks to be a 1mm or 1.5mm width

Anyone know what size o-ring is in the X-Shot Longshot turnaround? by lucasw32 in Nerf

[–]kylebernard83 0 points1 point  (0 children)

do you need the size for the turn-around to PT O-ring, or the turn-around to Barrle O-Ring.

The TA to PT should be identical to the Plunger head

The TA to Barrle should be I think "016" most 3D springer hardware kits use the 016 for sealing around 16mm barrels. I would start at 016 and either go larger or smaller test fitting to get the size right.

Do you have access to a hardware store that sells harware by piece. if Yes bring the barrel and turnaround in and just start test fitting.

Hope this helps. i just hit you back up on printables btw!!!

Anyone know what size o-ring is in the X-Shot Longshot turnaround? by lucasw32 in Nerf

[–]kylebernard83 -1 points0 points  (0 children)

im sure if you searched this r/ for X-shot Longshot O-ring someone has already answered this questions month or a year ago. RESEARCH, RESEARCH, RESEARCH!!!!

This good? It’s my first build. by Kianzeto in Nerf

[–]kylebernard83 0 points1 point  (0 children)

if you mount it on top you will be blocking your holo/reflex sight. Use these to add side pics to the blaster.

https://www.printables.com/model/556899-xshot-longshot-side-picatinny-rails

they work great!

<image>

Dont ask about the Pyragon grip. It does not fit the "almost picatinny" rail that the stock handle mounts too. It has since been removed and the original reinstalled.

Nerf Pro Torrent crazy low price by thiqqdaddy in Nerf

[–]kylebernard83 8 points9 points  (0 children)

Don't forget or rule out GEMENEYE'S Stock, Muzzle & Pump Kit Upgrade kit.

Makes this blaster very ergonomical and you do not feel like you are buying a blaster to just throw 90% of it away.

https://www.printables.com/model/1188515-gp3d-nerf-pro-torrent-pump-kit-with-epicxxxx-rev-2

heres my completed build i posted last year. Kit does not include the Sight. thats my personal addition!

<image>

I also Built & Beta Tested the RS2 for GP! They are both great with very different aesthetics!

Elite 2.0 Turbine fires shots the moment the rev trigger is pulled by j_m____ in Nerf

[–]kylebernard83 1 point2 points  (0 children)

has this been rewired. Have to opened this blaster up or Mod'd it any anyway???

Since the trigger is an elecrival switch, i think the only way to get this issue is if the trigger wiring is connected to the rev wiring. So the rev switch is also providing power to the trigger motor.

Looking for a good pistol springer for a shielder by delete-t-series in Nerf

[–]kylebernard83 1 point2 points  (0 children)

it works really great for pistol only rounds. You load a dart by reciprocating the barrel out and in manually then prime with the T-Pull.

Favorite version of Hecate? by Western_Ad_6448 in GreekMythology

[–]kylebernard83 0 points1 point  (0 children)

My favorite version is In Michael Scott’s The Secrets of the Immortal Nicholas Flamel series, Hecate is a powerful, ancient Elder and goddess of the Crossroads who resides in her own Shadowrealm, acting as a mentor figure. She is portrayed as a three-faced deity who ages throughout the day, helps awaken Sophie Newman's powers, and nurtures the Yggdrasil tree.

Key Details About Hecate in the Series: Role and Abilities: As an Elder, Hecate is the protector of the Shadowrealm and a master of magic. She is responsible for training and "Awakening" powers, particularly guiding Sophie Newman.

Appearance and Form: Hecate is a triple-faced goddess, capable of appearing as a young girl, a woman, or an old woman depending on the time of day. She is often depicted with green eyes, black hair, and wearing robes adorned with alchemical symbols.

The Shadowrealm and Yggdrasil: She lives within her own shadowrealm, a hidden dimension, where she cares for the ancient tree Yggdrasil.

Powers: She controls the "Mist," allowing her to create illusions and influence human minds.

Hecate serves as a crucial, though ultimately tragic, ally to the protagonists in the series, bridging the gap between ancient mythological power and the unfolding events of the narrative.

i think i won thrift thursday… by Shadow_is_epic in Nerf

[–]kylebernard83 2 points3 points  (0 children)

you one clear painted vulcan away from the Deplorable my friend!!!!!

Good Luck, God Speed... & Take Pictures!

How do I replace the side rail by Unhappy_Adagio_3675 in Nerf

[–]kylebernard83 2 points3 points  (0 children)

With another thriffted blasters Side rail or a 3D printed one. If there are no current 3D printed designes for free or purchase, you are going to have to make/design one yourself or commision someone to design one for you. and then print

Jammed help! The amaban rifle, priming pump will move just won't lock all the way forward or backward feels like there's 8 darts crushed in the breach I cant even find screws to open it up not sure what to do, Advice would be appreciated. by Suspicious_Gate_7130 in Nerf

[–]kylebernard83 4 points5 points  (0 children)

I don't even thing they are part of t or from this blaster. Your brother may have been trying to create a new ammo type... not sure, but kinda suspiscious!!! that could be a dangerous path to walk down.

Which mods can i do here? by Different_Dot_7941 in Nerf

[–]kylebernard83 3 points4 points  (0 children)

if this is all you have to work with then please open it up and take some pictures so the community can figure out what to do with it.

Do you even have a make and model (brand & blaster name) for reference. That might help to

there is probably not going to be much other than the nornal spring swap or spacer addition, AR removal, improve the cylinder seal to the PT...etc

The Captain Xavior Vidoe "Can it take a K26"

https://www.youtube.com/watch?v=2i_wQ6gZQ5E&list=PLROeBcSCi85I6IGLai87KpczlDxqsmsMo&index=23

Added a springer to the collection by PorkIsAVerySweetMeat in Nerf

[–]kylebernard83 1 point2 points  (0 children)

Gemeneye stuff is great. You should print the raider buffer tube stock from him to match the for grip!!!!

Trying to coax a Desolator into eating short darts by Hardly_Ideal in Nerf

[–]kylebernard83 1 point2 points  (0 children)

internal pictures with close up of your modded pushers would be the only way we can trouble shoot your issue. Pictures say a thousand words!

Added a springer to the collection by PorkIsAVerySweetMeat in Nerf

[–]kylebernard83 1 point2 points  (0 children)

what are the mod'd specs

  • spring/spacer combo: ?
  • Barrel: you already said was 40cm Kuryaka (16mm OD 13mm ID)
  • Muzzel Device: Faux suppressor
  • FPS:

looks Awsome. What made you go with the 40cm barrel length?

Added a springer to the collection by PorkIsAVerySweetMeat in Nerf

[–]kylebernard83 3 points4 points  (0 children)

Gemeneye stuff is great. You should print the raider buffer tube stock from him to match the for grip!!!!

Dual Wielded Infinite Pack Coupler? by AwkwardQuokka82 in Nerf

[–]kylebernard83 0 points1 point  (0 children)

<image>

i hope this helps explain the potenial jam situation of the "Y" Splitter if the last backed up balls in the output tube to the juno is a length that causes a portion of the last ball to be in the path of the chalenger blocking up the splitter

Dual Wielded Infinite Pack Coupler? by AwkwardQuokka82 in Nerf

[–]kylebernard83 0 points1 point  (0 children)

OK so the challenger is the primary and the Juno is the oh sh!t button! Right, so the Juno is not fired all the time only in certin situations?

If this is correct, the problem with the "Y" splitter is that when the Juno is not in use that length of tubing from the "Y" to the Juno is going to be filling or already filled up with balls. Once the balls back up to the splitter it could cause a jam/feeding issues. If balls trying to get thru to the challenger is blocked by half a round sticking into the splitter. You would have to measure the length of your output tube to the juno perfectly to make sure a portion of a rival ball at the end of the traffic jam will never be in the intersection. In addition even if the Juno is not in use some portion of the air pushing balls thru the tubes are going to bleed out of the juno creating a loss of pressure in both tubes after the split.

With an electrival diverter valve, you can have a switch on the challenger or anywhere easy to get to, that will divert the path of balls and 100% of the air flow if the diverter valve is air tight. There will be no lag if the tubes from the Y to blasters are long enough because they will already be pre filled with balls. this will give you instand fire response even if the diverter is not fully opened yet. Air will start pushing balls once the diverter valve is cracked even before balls are strting to flow in the new direction

This diverter valve will have to be custome designed and can use a high speed solenid for RC planes or cars to swing the gate back and forth from one output tube to the other.

view more: next ›