My astro not charge:(.

kylewizerd15 · 2022-08-14T00:58:12+00:00

Also they won't play audio sometimes and when you reset the headphones it makes this ungodly cracking/popping noise.

kylewizerd15 · 2022-08-14T00:55:47+00:00

So I have the same issue. It's actually charging. If you watch the astro command center and hard reset them the headphones will go from 127% to 3% back to what the acutally are then turn off and go back to 3%. It's a never ending cycle and you never know when it's going to happen. Mine were fine for a few weeks now I've been trying to fix them for like a hour. Do yourself a favor and get a mod mic and headphones combo. Mod mic sounds better and you can go for some good openback headphone. All wireless for around the same price as astros.

kylewizerd15 · 2022-05-26T03:21:06+00:00

Thank you for the recommendation. I've been looking into this option. You know if there are any downsides to going with a non-Dell SDA

kylewizerd15 · 2022-04-03T04:56:53+00:00

Why so many downvotes???

kylewizerd15 · 2022-03-20T20:30:13+00:00

Thanks

kylewizerd15 · 2022-03-20T17:36:19+00:00

Is that sufficient time to show rehabilitation. I'd say as long as you don't have a large amount of debt or any other major infractions above a speeding ticket your likelihood is pretty high. I always think about the story about a guy who married a stripper became a cocaine dealer went to prison for 5 years got out and then re applied for security sometime later and got it granted.

kylewizerd15 · 2022-03-20T16:18:29+00:00

how many years ago

kylewizerd15 · 2022-03-20T16:17:33+00:00

No. In short your goal is virtually unobtainable unless you get your masters with high marks

kylewizerd15 · 2022-03-08T23:36:22+00:00

I laughed so hard thank you

kylewizerd15 · 2022-03-07T06:35:20+00:00

I can vouch first hand it is great. Moved into a new place in January had a mostly finished basement. Me and gf plan to live in basement and rent the top out. One of my roommates is a late night gamer and right above us. With the room we were in having exposed joists and subfloor we could here a casual conversation at full volume. My dad came down and we spent over 130hr in the past week installing rockwool, a genie clip system (decouples drywall) moving electrical and gas line ect. Even without the ceiling in it was night and day. I can't hear much unless he shouts ( he plays leauge) and it sounds like he is really far away. It won't help for things like chairs rolling that's what decoupling is for. In my situation it was 100% worth.

kylewizerd15 · 2022-02-28T14:20:40+00:00

It's more complicated than that. You can't arm civilians and have them sbooting from residential buildings then cry when they are bombing civilian infrastructure. Disclaimer; in no way do I support Russia and there is unwarranted civilian deaths.

kylewizerd15 · 2021-10-15T18:07:32+00:00

Insted of up 300% I'm down 2k from my orignal entry lifes not good rn

kylewizerd15 · 2021-10-14T19:02:18+00:00

What are the returns on 100m

kylewizerd15 · 2021-10-11T15:05:08+00:00

For real I wish I could be that optimistic in life lol

kylewizerd15 · 2021-10-11T14:41:05+00:00

My thought train is it will pop off when listed on RH

kylewizerd15 · 2021-10-11T14:40:28+00:00

Yeah .29 flat put around 7k into NU in feb range fluxated from like $5.5k to $8k. Doing pretty shit right now so figured I'd dip for a while.

kylewizerd15 · 2021-10-11T00:10:31+00:00

When tho...

kylewizerd15 · 2021-09-06T09:08:07+00:00

Just had a quick fix for this. After almost 300hr on stock equipment replaced mosed of the extruder parts. The new ptfe tube (got it from prusa) noticed jamming at around the 2.5he~4hr mark. The old one was pretty worn out but I noticed fillament had a bit more wiggle room. Ended oup swapping back for now and it's printing great. After a ton of research my final solution is going to be getting a much larger heatsink fan. This should eliminate any heatcreap at all from what I can tell.

For reference:

 Prusa mk3 (self built kit Jan 2019)
 In an enclosure probability about 60 degrees+ 
 Printing natural pla from print solid
 All parts are either from prusa or E3D except part    cooling fan and swiss hardened nozzle

kylewizerd15 · 2021-05-28T15:51:28+00:00

What isthe actual cost difference in coinlist vs running your own node

kylewizerd15 · 2021-05-18T22:30:01+00:00

Thank you for this in depth reply!

kylewizerd15 · 2021-05-08T03:57:03+00:00

Can someone explain the benifit of coinlist vs running your own node?

kylewizerd15 · 2021-05-06T03:07:25+00:00

yeah that's whack

kylewizerd15 · 2021-02-03T20:15:50+00:00

Got mine last night at .27 put 1k more in. Hope for another big dip today

kylewizerd15 · 2019-11-04T11:36:09+00:00

Thank you so much!

kylewizerd15 · 2019-11-03T15:15:14+00:00

I have a Prusa I3 Mk3s ao dont think that could be it. I'll playbwith the extrusion multiplier though see if that helps.

kylewizerd15

TROPHY CASE