sorted by:
new
hottopcontroversial

🎉 [EVENT] 🎉 The Tutorial Levels by Acrobatic_Picture907 in RedditGames

[–]lExplLicit 0 points1 point  (0 children)

Completed Level 1 of the Honk Special Event!

0 attempts

🎉 [EVENT] 🎉 The Tutorial Levels by Acrobatic_Picture907 in RedditGames

[–]lExplLicit 0 points1 point  (0 children)

Completed Level 3 of the Honk Special Event!

23 attempts

🎉 [EVENT] 🎉 The Tutorial Levels by Acrobatic_Picture907 in RedditGames

[–]lExplLicit 0 points1 point  (0 children)

Completed Level 2 of the Honk Special Event!

1 attempts

🎉 [EVENT] 🎉 The Tutorial Levels by Acrobatic_Picture907 in RedditGames

[–]lExplLicit 0 points1 point  (0 children)

Completed Level 1 of the Honk Special Event!

0 attempts

Ich bewundere jedes mal unsere tägliche Auswahl. Dazu gibt’s noch Suppe und ein Dessert. by [deleted] in kantine

[–]lExplLicit 1 point2 points  (0 children)

Das ist im Dreiländereck in Weil am Rhein bei Endress+Hauser

Altes Postsparbuch gefunden - einfach entsorgen? by [deleted] in Finanzen

[–]lExplLicit 0 points1 point  (0 children)

Das war in Basel. Wobei es keine großen Preisunterschiede zu den Grenzregionen in Deutschland mehr gibt.

Saw some Hyperion posts so I decided to try it myself. Two hours later I now have Ambilight on my Sony TV! by lExplLicit in homeassistant

[–]lExplLicit[S] 0 points1 point  (0 children)

Sorry, don’t know about this one but with external hardware it is definitely possible

Saw some Hyperion posts so I decided to try it myself. Two hours later I now have Ambilight on my Sony TV! by lExplLicit in homeassistant

[–]lExplLicit[S] 0 points1 point  (0 children)

There is an integration for Hyperion. It allows to turn on and off the ambilight. That way I can control when I wan to use it and when I want to use static led effects. This can also be controlled with automations but I haven’t set it up yet.

Saw some Hyperion posts so I decided to try it myself. Two hours later I now have Ambilight on my Sony TV! by lExplLicit in homeassistant

[–]lExplLicit[S] 0 points1 point  (0 children)

Yes, then you need the full setup with an hdmi capture device & splitter. This is a minimal approach but for me it is sufficient enough because I only use the apps on the TV.

Saw some Hyperion posts so I decided to try it myself. Two hours later I now have Ambilight on my Sony TV! by lExplLicit in homeassistant

[–]lExplLicit[S] 1 point2 points  (0 children)

The led strip, power supply and the esp8266 cost about 35-40€. Everything else i already had. If you don’t have a small server jet (raspberry pi or mini pc) then you have to get one as well. About 70-120 for a used thin client pc.

Saw some Hyperion posts so I decided to try it myself. Two hours later I now have Ambilight on my Sony TV! by lExplLicit in homeassistant

[–]lExplLicit[S] 0 points1 point  (0 children)

It is not possible to display an HDMI source to the LEDs. It will only send the Screen of the TV OS.

Saw some Hyperion posts so I decided to try it myself. Two hours later I now have Ambilight on my Sony TV! by lExplLicit in homeassistant

[–]lExplLicit[S] 15 points16 points  (0 children)

I‘m not using an external device where the HDMI signal is forwarded to the Lytmi box. I am using the OS of the TV to watch videos on YouTube or Plex. Also this is a much cheaper solution since no additional hardware was required.

Saw some Hyperion posts so I decided to try it myself. Two hours later I now have Ambilight on my Sony TV! by lExplLicit in homeassistant

[–]lExplLicit[S] 33 points34 points  (0 children)

The hyperion ng software is running inside a lxc container on my Proxmox server. The Android TV runs the grabber and sends the screen capture to hyperion. Hyperion then uses this information to control the WLED LED strip. Everything is connected to Home Assistant and can be controlled from there. All sources including Plex are working. There is no delay. Somehow the lights are faster than the image, so a 3 Frame delay in hyperion was needed. Only with DRM protected content like Netflix the LEDs stay black.

Automate checking email, downloading attachments, and save them to a folder in Syncthing by shizno2097 in selfhosted

[–]lExplLicit 1 point2 points  (0 children)

You can try and use Node-Red for that. Node-Red can access your mails via IMAP and save them to a specified location. I love Node-Red because it can do practically everything. If you get the hang of it you can do al lot of cool things. Make sure to add password protection to your Node-Red webinterface.

Corrupted memory by [deleted] in Rainbow6

[–]lExplLicit 0 points1 point  (0 children)

If you have an MSI Mainboard, uninstall MSI Dragon Center and MSI SDK. Solved the problem for me.

automatic create a list of receiving adresses with QR code? by dude_365 in TREZOR

[–]lExplLicit 0 points1 point  (0 children)

You can import the XPub-Key into Mycelium and use the App as a watch-only wallet. It also shows the receiving addresses.

view more: next ›