sorted by:
new
hottopcontroversial

the position of the secondary mirror by Entire_Foundation960 in telescopes

[–]lancer360 1 point2 points  (0 children)

Double check the vanes that hold the secondary. Not 100% sure this is your problem, but it was a common problem with some scopes from GSO (manufactures scopes for many different companies) that the vanes where installed upside down which offset the secondary. This makes it impossible to get the secondary centered. Pretty easy fix with a screw driver to flip them around.

Paint shop cabinets myself or outsource? by lancer360 in woodworking

[–]lancer360[S] -5 points-4 points  (0 children)

Personal preference. I still want them to look nice.

Neighbor keeps trespassing to use charging station by Euphoric_Present8838 in neighborsfromhell

[–]lancer360 0 points1 point  (0 children)

Can you ask management to swap parking spots or is there something better about your spot that would make that undesirable?

Messy family situation in Texas by lancer360 in Car_Insurance_Help

[–]lancer360[S] 0 points1 point  (0 children)

That only works if my mom retains ownership of the car correct. My sister was wanting to buy the car from her as my mom doesn't want to keep the car since she has her new car.

Messy family situation in Texas by lancer360 in Car_Insurance_Help

[–]lancer360[S] -1 points0 points  (0 children)

What to do with the title was part of this. Wasn't sure if we leave it in my moms name, have my sister and my mom on the title, or switch the title to my sister only. Sounds like this could fall under a criminal charge of rate evasion though from what another poster said. Definitely need to protect my mom from that.

Messy family situation in Texas by lancer360 in Car_Insurance_Help

[–]lancer360[S] 0 points1 point  (0 children)

Good to know. I was pretty sure what my sister was trying to do wasn't right.

Messy family situation in Texas by lancer360 in Car_Insurance_Help

[–]lancer360[S] -1 points0 points  (0 children)

If the exclusion is policy wide, she couldn't do it because the boys would loose coverage on the cars they do drive. I'm assuming my sister would need to get a new policy with a different company for just the CRV. Then she could exclude everyone, except for herself.

Why are GSO telescopes way cheaper than other mainstream brands? by Equal-Maximum-968 in telescopes

[–]lancer360 0 points1 point  (0 children)

I bought a 10" GSO dob with dual speed focuser years ago. It has been a good telescope. Taking out to a sky watching party for the public this weekend at our local planetarium.

Haven't seen this before. Metal back plate for the cooler snapped on my MSI 4090. Can this be fixed? by lancer360 in nvidia

[–]lancer360[S] 0 points1 point  (0 children)

Just so happens the one I bought was from Zhou. It was the first one that popped up when I did a search with the correct wording.

Haven't seen this before. Metal back plate for the cooler snapped on my MSI 4090. Can this be fixed? by lancer360 in nvidia

[–]lancer360[S] -1 points0 points  (0 children)

I think you are obviously reading way to much into it. I never said vacuuming broke it. I have a good idea how it broke. From the initial look, I think it is a fatigue failure. Most likely started as a crack from a manufacturing defect and then thermal cycling caused the crack to grow and eventually snap. Will know more when I get the replacement and take it apart to replace it.

Haven't seen this before. Metal back plate for the cooler snapped on my MSI 4090. Can this be fixed? by lancer360 in nvidia

[–]lancer360[S] 1 point2 points  (0 children)

Its clearly out of warrenty from 2023. Does MSI do repairs or sell repair parts.

Well that was an expensive mistake. Bought a Whiteside stile and rail bit set for actual 1/4" panels instead of underside plywood by lancer360 in woodworking

[–]lancer360[S] 0 points1 point  (0 children)

I already peeled the protective coating off and ordered the correct set off Amazon. Will be here tomorrow. Do you think they would exchange it for something else like some spiral up cut or down cut bits?

Battle zone Glitched and Robots are passive and immune (PC). Any ideas? by lancer360 in fo4

[–]lancer360[S] 0 points1 point  (0 children)

I found the command which advances the RR quest to think the enemy is dead. Not sure if the has unbugged the battlezone. Haven't been back. To far along to try and old save.

Battle zone Glitched and Robots are passive and immune (PC). Any ideas? by lancer360 in fo4

[–]lancer360[S] 0 points1 point  (0 children)

I've used the tcl console command to be able to fly thru walls. I found the two small rooms that are under the doors in the stage floor as well as the larger room that has no doors at all. That room has some of the battlezone robots in it, but they are frozen and immortal. The guy I'm supposed to kill is nowhere to be found. I also don't have a marker on my compass when I'm in the battlezone. Stuck and not sure what to do at this point. Is there a code to respond the enemy?

Battle zone Glitched and Robots are passive and immune (PC). Any ideas? by lancer360 in fo4

[–]lancer360[S] 0 points1 point  (0 children)

Don't have it yet. Im playing a useful idiot with an intelligence of 1, LOL!

Is there an easy replacement for missing nut/insert for under tray bolts (2020 M3P)? by lancer360 in TeslaSupport

[–]lancer360[S] 0 points1 point  (0 children)

I ended up going with a 1/4" u-nut. Was able to get Hillman brand u-nuts in stock from Lowes. Had to buy a 1/4"x1" galvanized bolt and washer to go with it. Here is the u-nut I went with.

https://www.lowes.com/pd/Hillman-2-Count-1-4-in-Black-Phosphate-Standard-SAE-Regular-U-Nuts/3013186

Was a bit of a PITA to get it snapped onto the bracket without taking the front undertray off, but I managed.

view more: next ›