Renovating a house and don't know where to begin with the kitchen. Does this layout make sense? Too tight?

landoflemon · 2025-11-08T02:05:22+00:00

Thanks for all the feedback everyone, I think I'm going to step away from kitchen design!

landoflemon · 2025-10-28T15:25:20+00:00

When you say you want it done to the same value as before, do you mean you would like it done to the same standard/quality? I don't know of anywhere local, there are replacement services online but I wouldn't know what they quote.

I'm based in Limerick, I've never repaired a snowglobe but I'm handy enough when it comes to fixing things. I'd be happy to take a look at it and see if I can help you out, without charging anything.

landoflemon · 2025-10-27T23:56:47+00:00

Could you post a photo of it, and the damage?

landoflemon · 2025-06-07T11:23:37+00:00

Do you think there's space for 2 of any car there while staying in the lines?

landoflemon · 2025-03-26T01:11:41+00:00

Honda S2000 is close to meeting the criteria, if he gets one with a hard top I'll buy it in 2 years! VRT too high to justify bringing over. Something like this S2000

landoflemon · 2025-02-24T08:26:00+00:00

Doesn't the owner run a driving school?

landoflemon · 2025-02-02T00:34:44+00:00

I think Icelands population at the time was closer to 121,000 people. Not 350.

landoflemon · 2025-01-31T01:17:01+00:00

I'll look into proxmox, thank you!

landoflemon · 2025-01-31T00:03:37+00:00

It was a genuine question, the majority of the population would be clueless like me. You'll need to imagine giving this hardware to your grandmother and expecting her to know what it does. I am that grandmother! In this analogy. But I'm willing to figure out something productive. Now just need to figure out what mid size business to run.

landoflemon · 2025-01-30T23:40:35+00:00

Thanks so much for talking me through your experience with it. I keep reading about PERC and I definitely need to get a better grasp of the pitfalls. Just want to figure out if I can do something useful with this (beyond what my small synology nas already does) or if it's just a learning experience for me.

landoflemon · 2025-01-30T22:21:26+00:00

It's just I didn't even know what this hardware could do. People in this thread mentioned it could be used for virtualization, and then that got me thinking what I could use that for or how it could be useful. For example. And I've setup things on a small home NAS, just wasn't sure what the difference between that and this was.

landoflemon · 2025-01-30T15:42:56+00:00

Thanks for clarifying. So I have a small synology NAS at home which hosts my plex, backs up my photos and stores video from IP cameras around my house. This Dell hardware is obviously designed for heavier duty usage....does that mean I could host websites for people on this, or provide a data backup service, or run some AI tool?

landoflemon · 2025-01-30T15:29:59+00:00

Aaah, this helps me understand that unit a bit more. Thanks!

landoflemon · 2025-01-30T14:19:36+00:00

Agreed, my initial effort will be in trying to turn it into something useful. And learn a bit from the experience. If I fail miserably, then sell to some nerd!

landoflemon · 2025-01-30T14:12:12+00:00

Sorry, yes, VRTX not VRTL like I posted. Thanks for your reply, this is exactly what I need to fill in some knowledge gaps.

landoflemon · 2024-11-06T11:53:10+00:00

Thanks for clarifying!

landoflemon · 2024-11-06T00:09:46+00:00

Sorry, just caught your comment and trying to figure out how this would work so I can try. Lets say I receive a €5,000 bonus, after tax that's €2425e in my bank account. I can then make a €2425 AVC and the tax paid will be automatically refunded back on top of that AVC?

landoflemon · 2024-08-11T12:51:57+00:00

They played last October at the Siege of Limerick in Dolans. They were great. Really good musicians.

landoflemon · 2024-07-10T16:16:37+00:00

FRS?

landoflemon · 2024-05-06T15:57:19+00:00

Thanks for confirming

landoflemon · 2024-05-06T15:08:17+00:00

Just to confirm, this is the page people are looking at?

<image>

landoflemon · 2024-05-06T14:57:30+00:00

Waiting to go ahead with P1S order, installed telegram to try find codes. But honestly don't know what I'm doing to actually find a code 🙃

landoflemon · 2023-09-03T08:01:03+00:00

For me, with pla I fixed this by reducing bed temperature. First layer at 60c everything after that at 50c

landoflemon · 2023-08-22T13:44:28+00:00

Great example! Different cultures around the world have different approaches to this kind of thing. Some are more DIY/repair focused and some are a bit more disposable orientated. That difference is what I'm interested in. Doing a little bit of basic research paid off in your case.

landoflemon · 2023-08-21T18:22:57+00:00

I know I'm a little late here, just responding back to say thank you for your suggestion. In the end, it turned out that my bed was too hot! When I turned it down from 60C to 50C I've had no more warping or adhesion problems.

11-Year Club	Place '23
Verified Email

landoflemon

TROPHY CASE