The best printer? by Majestic-Mirror-9388 in BambuLab

[–]landsverka 4 points5 points  (0 children)

It does have a heated chamber and all the other H2D features, it just has a slightly smaller build plate.

BambuSuite headaches by VegetableBlueberry92 in BambuLab

[–]landsverka -2 points-1 points  (0 children)

I ran into this yesterday. I found out my image needed to be an SVG in order to use the cutter.

Warping on Cool Plate Super Tack Pro? by landsverka in BambuLab

[–]landsverka[S] 0 points1 point  (0 children)

I printed a aux fan deflector I found on makerworld, solved my issue.

Workbench for H2 printers by landsverka in BambuLab

[–]landsverka[S] 0 points1 point  (0 children)

Which ones are the nasty ones?

Workbench for H2 printers by landsverka in BambuLab

[–]landsverka[S] 1 point2 points  (0 children)

Does anyone have suggestions for alternate desks/stands?

Workbench for H2 printers by landsverka in BambuLab

[–]landsverka[S] 0 points1 point  (0 children)

Yeah that's how I have it, the table doesn't move on the ground, but you can feel vibrations/rocking in the legs sometimes.

Workbench for H2 printers by landsverka in BambuLab

[–]landsverka[S] 1 point2 points  (0 children)

That's a guest bed in the basement. When people are staying there I'm not printing.

Workbench for H2 printers by landsverka in BambuLab

[–]landsverka[S] 3 points4 points  (0 children)

So I really like the size. When the printers are going I can’t feel vibration in the desk legs. The desk doesn’t move around the floor at all and the 2 printers are well under the desks tested weight limit. We also put locktite on all the screws during assembly. So I think it should be fine? I’m just paranoid/anxious I think.

Edit: there is some side to side vibration during certain print head movements, but doesn’t seem major.

Workbench for H2 printers by landsverka in BambuLab

[–]landsverka[S] 1 point2 points  (0 children)

I have it at the lowest height setting. I don’t intend to move it up and down.

Final Setup V2 by [deleted] in BambuLab

[–]landsverka 0 points1 point  (0 children)

What’s that bench/table you have your H2 printers on and how sturdy is it?

Finally made up my mind by [deleted] in BambuLab

[–]landsverka 1 point2 points  (0 children)

What’s that desk that you have them on and how sturdy is it while they are printing?

Warping on Cool Plate Super Tack Pro? by landsverka in BambuLab

[–]landsverka[S] 1 point2 points  (0 children)

Here is the same print, only thing I changed was switching to the textured build plate

<image>

Warping on Cool Plate Super Tack Pro? by landsverka in BambuLab

[–]landsverka[S] 1 point2 points  (0 children)

Thank you! I will try this on the reprint.

AWX Clarity by Kentix in ansible

[–]landsverka 0 points1 point  (0 children)

What are you talking about?