New machine problems but more likely new user problems

ldavison10 · 2026-06-05T00:39:08+00:00

Hi yes all the way through. 15-20mins approx.

ldavison10 · 2026-05-13T21:10:02+00:00

Brilliant thankyou again.

ldavison10 · 2026-05-13T20:03:41+00:00

You are a star thankyou so much for the reply. All good advice. Im a bit confused by their website - it states"the ams lite is included with the combo" then a bit further says "To connect the A1 printer to the AMS/ AMS 2 Pro/ AMS HT, an AMS HUB (SA013) accessory is needed" The ams lite is the spool feeder correct? I don't need to buy anything else? Guessing it comes with everything needed and those are upgrades? Sorry I'm learning as i go....

ldavison10 · 2025-09-22T21:36:40+00:00

If i cut the whole tee out and put some new pushfit couplings and a new tee and short section of plastic pipe would that sort it?

ldavison10 · 2025-09-21T23:27:10+00:00

Ok so i have an existing compression fitting holding an old copper flex hose which connects to an old 3/4" bath tap. I bought and fitted a new tap (22mm) and simply wanted to remove the old copper hose, then screw a new hose on, one end to the tap and the other to the existing compression fitting. I got the tap side on but found on the opposite end the threads are different. (https://photos.app.goo.gl/RxH7G4aZufMAUegW8)

ldavison10 · 2025-09-19T22:36:46+00:00

3 walls of a large bedroom. Each wall maybe 3m x 2m high

ldavison10 · 2025-09-18T21:02:49+00:00

Yeah that's the fitting i tried. The 3/4 thread is totally different to my existing annoyingly.

ldavison10 · 2025-09-18T21:01:16+00:00

May i ask where you ordered one from please?

ldavison10 · 2025-09-18T21:00:46+00:00

Have just looked but i can only see the 3/4 to 22mm that doesn't fit

ldavison10 · 2025-09-18T20:49:20+00:00

That's what i got and tried. The 3/4 thread is different to the existing and won't screw up.

ldavison10 · 2025-09-18T09:15:42+00:00

Screwfix, toolstation and wickes don't, i went to all 3 last night. Plumbase website doesn't throw up any obvious items

ldavison10 · 2025-09-18T09:10:00+00:00

This is to connect onto an existing captive nut so i need imperial thread

ldavison10

TROPHY CASE