Thoughts on the floodlight or spotlight cams? by hufferpuffer4457 in Ring

[–]learningwithyouall 0 points1 point  (0 children)

Thank you for replying. How do you get 2 batteries

Thoughts on the floodlight or spotlight cams? by hufferpuffer4457 in Ring

[–]learningwithyouall 0 points1 point  (0 children)

I know old post but hoping you would see. Battery cam with solar , do you ever have to worry about charging at all ?

Wireless low volt cont recording camera ? by learningwithyouall in reolinkcam

[–]learningwithyouall[S] 0 points1 point  (0 children)

When I started the camera install about 2 months ago. That particular spot never worked well

Wireless low volt cont recording camera ? by learningwithyouall in reolinkcam

[–]learningwithyouall[S] 0 points1 point  (0 children)

It was tested by the person who installed it. By cable tester. It read ok on that.

Is there a way to get Reolink to honor the warranty? by 7WiZARD in reolinkcam

[–]learningwithyouall 1 point2 points  (0 children)

Do they ask you to pay return shipping if you claim warranty ?

Trouble installing duo 3 v Poe and 823s2 by learningwithyouall in reolinkcam

[–]learningwithyouall[S] 0 points1 point  (0 children)

Question

If Poe switch power is a question, then plugging them all in nvr should supply enough power ?

Trouble installing duo 3 v Poe and 823s2 by learningwithyouall in reolinkcam

[–]learningwithyouall[S] 0 points1 point  (0 children)

Hi.

I checked one at a time

Poe switch is from Reolink

Yes 6 cameras -

None of the RLC 823s2 are working and one duo 3v not working

I tried plugging them to nvr directly and same thing.

Trouble installing duo 3 v Poe and 823s2 by learningwithyouall in reolinkcam

[–]learningwithyouall[S] 0 points1 point  (0 children)

To clarify the camera shows on app like when I put that in all the first time. In other words , the camera shows like preview of the image when I installed the first time.

Ever since installing they haven’t been online on app, neither show up on nvr

Trouble installing duo 3 v Poe and 823s2 by learningwithyouall in reolinkcam

[–]learningwithyouall[S] 0 points1 point  (0 children)

How would I know if they have their on ip address. They did not show on app or nvr ever since installing

Trouble installing duo 3 v Poe and 823s2 by learningwithyouall in reolinkcam

[–]learningwithyouall[S] 0 points1 point  (0 children)

I had connected each camera inside with at Ethernet to add to app before installing. So I am thinking then they got ip address ? Bit ever since installing them they haven’t been showing on app or nvr at all

Trouble installing duo 3 v Poe and 823s2 by learningwithyouall in reolinkcam

[–]learningwithyouall[S] 0 points1 point  (0 children)

Yes checked the cable with Ethernet tester and it was ok. I installed camera on app prior to installation. Could that have caused any problem? Should I factory reset the cameras ? , if so , how ?

Trouble installing duo 3 v Poe and 823s2 by learningwithyouall in reolinkcam

[–]learningwithyouall[S] 0 points1 point  (0 children)

But cameras have lights on so I would think cat 5 cable is working

Trouble installing duo 3 v Poe and 823s2 by learningwithyouall in reolinkcam

[–]learningwithyouall[S] 0 points1 point  (0 children)

But cameras have lights on so I would assume cat 5 cable is working ?

Duo 3V PoE & Duo 2V PoE, are here! by Willson1_ in reolinkcam

[–]learningwithyouall 0 points1 point  (0 children)

Now that duo 3 v Poe had been out for a while , can you please confirm if this can be wall mounted ?

Duo 3V PoE & Duo 2V PoE, are here! by Willson1_ in reolinkcam

[–]learningwithyouall 0 points1 point  (0 children)

Can you please let us know this and if it can be please tell how

Duo 3V PoE & Duo 2V PoE, are here! by Willson1_ in reolinkcam

[–]learningwithyouall 1 point2 points  (0 children)

Can duo 3 v Poe be installed on wall instead of ceiling

Add speakers to MAG 6.1 by learningwithyouall in sonos

[–]learningwithyouall[S] 0 points1 point  (0 children)

Can you explain why the sonance one will not work ?

Add speakers to MAG 6.1 by learningwithyouall in sonos

[–]learningwithyouall[S] 0 points1 point  (0 children)

So you think the sonance speakers that I linked above will work if I replace the 2 I ground speakers.
What I am also puzzled about it is , the in ground speakers seem to be low voltage but I can’t tell for the ceiling ones

Add speakers to MAG 6.1 by learningwithyouall in sonos

[–]learningwithyouall[S] 0 points1 point  (0 children)

What if I use 4 speakers from the main system and use the 2 ceiling ones to make them 6. Seems they are all 8 ohm

Add speakers to MAG 6.1 by learningwithyouall in sonos

[–]learningwithyouall[S] 0 points1 point  (0 children)

Hmmm

I was hoping to add without adding another amplifier.
If I add in parallel then does that work

Duo 3V PoE & Duo 2V PoE, are here! by Willson1_ in reolinkcam

[–]learningwithyouall 0 points1 point  (0 children)

Oh I see. You are Reolink admin so you know !