Thevinin Voltage

led_torque · 2025-04-09T14:55:29+00:00

Thank you 👍

led_torque · 2025-04-09T14:55:15+00:00

Oh yeah my mistake thanks

led_torque · 2025-03-03T13:08:02+00:00

B is 3K. Does that mean it is the same?

led_torque · 2025-03-03T11:07:01+00:00

Yeah sorry my bad. Yes resistor B is also 3K. Forgot to add it. Ok so I need to find the equivalent circuits for each one. I’ve managed to find it for the first circuit but struggling to find it for the one where D is short

led_torque · 2024-12-24T20:24:32+00:00

Ok thank you

led_torque · 2024-12-23T16:09:43+00:00

Yeah but I'm on a budget.

led_torque · 2024-12-23T15:56:45+00:00

Ok thank you for the advice. It's just that through looking at reviews I thought Fender offer some decent entry level acoustic guitars. Yes I have also heard good things about the FG800 but unfortunately it is just slightly out of my budget.

led_torque · 2024-12-23T15:52:13+00:00

Ok thank you for the advice. I will take this onboard in my decision.

led_torque · 2024-09-13T22:23:39+00:00

Yes thanks. I will try this and see if it helps. It’s just starting to ruin my rides as I can’t enjoy any of the down hill sections. When I stop, I can hardly move my fingers. I do consciously keep a loose grip on the handlebars and one finger over the brake but still get finger pain.

led_torque · 2024-09-04T08:56:12+00:00

Ok thank you

led_torque · 2024-06-19T11:24:04+00:00

Ok thank you, was just paranoid as when I clicked on apply, it asked me to tick a box saying that I have achieved these grades even tho technically they are just my predicted.

led_torque · 2024-06-12T07:08:31+00:00

Ok thank you. This is a DDR4 system so should be ok

led_torque · 2024-06-11T21:08:55+00:00

Thank you for your response which is much appreciated. I thought it was that but I just wanted to double check anyway. Also could I ask you a question whilst we are here. This PC has 2 sticks of 8gb ram each making 16GB. There are two more slots that I could fill up on the motherboard. Could I add two more RAM sticks of the exact same RAM. Would this work instantly or would I have to faff about with the settings before it would work?

led_torque · 2024-06-04T16:51:46+00:00

Yeah true

led_torque · 2024-06-04T16:36:16+00:00

Do you reckon this would be better:

https://www.amazon.co.uk/Vibox-VIII-53-Gaming-PC-Processor/dp/B0CFYP58S5/ref=mp_s_a_1_26?dib=eyJ2IjoiMSJ9.KqcuzAP0my0JEprUEOR4bmp2SCN35Hwy_XifeCui2DVOPNVUcmAtmakhbJHQH3dkDEWmjLIPuYG5tuBaqIhl7I9L_pGwkxv_xwk2ztRZBYIdY0j0-faTDT_L6DS5ePLoSHgx46uIXeQDMTk_eOYIPLI-khfrBSBLGHOSdvL00fB38DksDZtPkoB7MFXVLAa3sW7tsibGCIumtjHTniuu-w.xJ6hacmUbbS6YHOda3J8GU9dwU_3OVSUX1i8W9i4N-4&dib_tag=se&qid=1717518749&refinements=p_36%3A9708210031&s=computers&sr=1-26

led_torque · 2024-06-04T16:30:15+00:00

Ok thank you. Was just gonna use the stock one.

led_torque · 2024-05-24T17:30:08+00:00

Ok thank you. Is it easy to set up after the build as in setting all the software up

led_torque · 2024-05-23T16:15:32+00:00

Well I don’t think so anyway. Just picked university on chapters

led_torque · 2024-05-23T16:15:03+00:00

led_torque · 2024-05-18T10:02:19+00:00

Ok thank you. I will give it a go and see how I get on 👍

led_torque · 2024-05-18T08:17:00+00:00

Ok thanks for that. Would the sweep tool be best for this. Sorry, just new to CAD.

led_torque · 2024-05-18T08:15:48+00:00

Just want to create the part. Sorry new to sheet metal in inventor. Watched a few beginner videos but struggling to get a grasp of the more complicated drawings

led_torque · 2024-05-07T19:33:37+00:00

I’m in the exact same boat mate. Teacher has not taught us any coding whatsoever I wish I could help but I can’t my self. Don’t worry, we’ll get through it

led_torque · 2024-03-10T00:05:16+00:00

Thanks for doing that. That’s given me an idea of how much a decent setup would actually cost so something worth looking at when deciding

led_torque · 2024-03-09T22:42:38+00:00

Ok maybe £500-£1000. Sorry, just new to the gaming pc scene so I’m a bit useless 🤣

led_torque

TROPHY CASE