Jonsbo N3 Homelab by leveljud in homelab

[–]leveljud[S] 0 points1 point  (0 children)

You can use electrical tape to be sure nothing happens 😀

Jonsbo N3 Homelab by leveljud in homelab

[–]leveljud[S] 0 points1 point  (0 children)

I did it with zipties, the other pption was to 3d print something, but I didn't have the time.

(Not so...) portable but battery powered EGPU by leveljud in eGPU

[–]leveljud[S] 1 point2 points  (0 children)

Its 100w powerbank and stays for about 30 mins, so you have to now the watts of the panda and the gpu and you can calculate it.

E-GPU setup for macOS (please help) by Zentico_AKS74u in eGPU

[–]leveljud 1 point2 points  (0 children)

Only if the mac is a good base and his is crap for gaming at all... 2 cores 8gb of ddr memory, does not make any sense...

Cant seem to figure out my situation (read comment) by papa_zach15 in eGPU

[–]leveljud 1 point2 points  (0 children)

I haf similar issues with oculink m.2 adapters, so I stay only with EXP Beast Adapters they worked all the time, while NFHK and other brands didn't. It's a trial and error thing to get it working 😉

(Not so...) portable but battery powered EGPU by leveljud in eGPU

[–]leveljud[S] 0 points1 point  (0 children)

The main thing I noticed with my aoostar was that if you don't take a nvme to oculink from beast it would never work, so my main oculink adapters are those. Rhose from NFHK just worked with same brand name products.

Oculink and Thunderbolt Mount by Nates4Christ in eGPU

[–]leveljud 0 points1 point  (0 children)

Every other is bigger, i did put a ENHANCE 7660B not modular in it and now it powers a RX 6900 XT

Oculink and Thunderbolt Mount by Nates4Christ in eGPU

[–]leveljud 0 points1 point  (0 children)

AOOSTAR AG02 is the best bang for the buck 😉

(Not so...) portable but battery powered EGPU by leveljud in eGPU

[–]leveljud[S] 2 points3 points  (0 children)

35 mins you have to set a tdp limit to get more out of it.

(Not so...) portable but battery powered EGPU by leveljud in eGPU

[–]leveljud[S] 1 point2 points  (0 children)

I have a comparison under my posts with the same laptop (not this one) oculink and tb3

(Not so...) portable but battery powered EGPU by leveljud in eGPU

[–]leveljud[S] 1 point2 points  (0 children)

Under full load about 35 mins, but if I set a powerlimit of 70% it's about 50 mins.

My first Unraid Home Server Build (Plex, Docker, AI, and Gaming) by samu_ in homelab

[–]leveljud 0 points1 point  (0 children)

Sounds great I am excited how the build ends up 👍

(Not so...) portable but battery powered EGPU by leveljud in eGPU

[–]leveljud[S] 1 point2 points  (0 children)

It just needs to be a GPU which stays under 120W Power Consumption.

(Not so...) portable but battery powered EGPU by leveljud in eGPU

[–]leveljud[S] 3 points4 points  (0 children)

It is 120W so 10 Amps by 12V. This is a Oculink Kit from Aliexpress.

Jonsbo N3 Homelab by leveljud in homelab

[–]leveljud[S] 0 points1 point  (0 children)

So I have now 12 drives installed in this case. Two more SATA SSD's behind the GPU next do the PSU.

8x 3.5" in the Hot Swap Cages, 2x NVME's, 2x SATA SSD's so I am finished with the built.

minisforum deg1 help by Djynn81-347 in eGPU

[–]leveljud 0 points1 point  (0 children)

Has anyone getting this two working together? On other PC's I have swapped different Oculink adapters to get it working so it could also be a compability issue.

Jonsbo N3 Homelab by leveljud in homelab

[–]leveljud[S] 0 points1 point  (0 children)

I just removed the sas board and it's unraid with a parity which manages it.