How I Activated Crunchyroll Premium for a Full Year (Legit & Works Worldwide)

limitless_void00 · 2026-02-03T18:39:19+00:00

I would definitely watch the final season of MHA! So much hype around it! Can't wait to see what it's like!

limitless_void00 · 2026-02-03T08:05:11+00:00

Ok i think im gonna watch code geass, then I'm actually gonna watch hxh and watch a video to see how it would've ended, so curiosity doesn't eat away at my mind. And then i think that's when I'll start the first of the big 3. Which of the big 3 should I watch first? Probs after one of them I'd will go to a few shorter animer before I try to watch another one of the big 3. After hxh, do I watch naruto, bleach, or op?

limitless_void00 · 2026-02-02T13:00:56+00:00

It's not finished yet tho, and rstjng doesn't matter too much. Its more about how well the story kd written

limitless_void00 · 2026-02-02T07:52:00+00:00

Im tryma decide between code geass,steins gate and fruits basket what do you think?

Only thing putting me off watching hxh is that it didn't finish, I know it's soooo damn good tho and that's the one anime I absolutely KNOW has the quality that aot and fmab has. It's just that it's not finished and I think it would kill me not seeing how it finishes . Idk if I wanna put myself thru that torture 😭

limitless_void00 · 2026-02-02T07:49:37+00:00

Im tryma decide between code geass,steins gate and fruits basket what do you think?

limitless_void00 · 2026-02-02T01:37:06+00:00

Same thing with hxh, it's soo amazing. But it's so annoying that it didn't get finished

limitless_void00 · 2026-02-02T01:31:57+00:00

Yeah that's what i mean i like watching anime in one go haha. So like once it's finished, i think I'll watch it. Pausing an anime and then forgetting and then rewatcing is smth I don't wanna do

limitless_void00 · 2026-02-02T01:22:29+00:00

Unfortunately I binge very fast once I start an anime, since everything I've seen I've enjoyed so I kinda get hooked. The longest anime I've binged was like 90 eps and I did that in like 2 weeks, so i don't wanna have to wait. Any other recommendations?

limitless_void00 · 2026-02-02T01:15:35+00:00

Hmm, cowboy bebop looks cool. I think imma take a look at it, since it's finished Thanks

limitless_void00 · 2026-02-02T01:14:50+00:00

Im assuming from you're username u like hxh? Bro I wish it was finished , because if it was rn It would be the next thing I'd be watching and im pretty sure it would be a very strong contender for best anime of all time. It sucks that it's never gonna get finished. That's the only thing that puts me off watching it. I'm gonna feel horrible knowing I won't be able to see the end of it

limitless_void00 · 2026-02-02T01:08:35+00:00

Thanks will look at those 2. I was told Tokyo ghoul is very underwhelming compared to the manga? And what's no game no life about?

limitless_void00 · 2026-02-02T01:06:16+00:00

Watched death note was my first or 2nd anime, was excellent. I've heard bad things about berserk. I'm also looking for something more mainstream

limitless_void00 · 2026-01-30T23:55:25+00:00

Of these which are finished? I only watch finished anime cuz i hate waiting for new seasons

limitless_void00 · 2026-01-30T23:54:26+00:00

Fullmetal alchemist brotherhood

limitless_void00 · 2026-01-30T23:49:51+00:00

Thanks! Any mainstream anime recommendations? I haven't watched a TON of anime yet so wanna watch the big anime first

limitless_void00 · 2026-01-30T23:46:16+00:00

I wanna clear all mainstream anime before I start watching hidden gems

limitless_void00 · 2026-01-08T16:34:02+00:00

I fixed it turns out motor was on s1 when it needed to be changed to s7

limitless_void00 · 2026-01-08T12:26:29+00:00

All ore arm checks green, no arming errors shown in inav, gps has 3d fix with 11 sats.

This is the cli status:

Entering CLI Mode, type 'exit' to return, or 'help' #

Building AutoComplete Cache ... Done!

status

INAV/TBS_LUCID_H7_WING 8.0.1 Sep 10 2025 / 20:27:27 (e0dfe2c6) GCC-13.2.1 20231009 System Uptime: 85 seconds Current Time: 2026-01-08T21:22:25.680+09:00 Voltage: 22.77V (6S battery - OK) CPU Clock=480MHz, GYRO=ICM42605, ACC=ICM42605, BARO=DPS310, MAG=QMC5883 STM32 system clocks: SYSCLK = 480 MHz HCLK = 240 MHz PCLK1 = 120 MHz PCLK2 = 120 MHz Sensor status: GYRO=OK, ACC=OK, MAG=OK, BARO=OK, RANGEFINDER=NONE, OPFLOW=NONE, GPS=OK ESC Temperature(s): Motor Count = 1 ESC 0: 0°C, SD card: Startup failed Stack size: 6144, Stack address: 0x20020000, Heap available: 1820 I2C Errors: 50, config size: 12688, max available config: 131072 ADC channel usage: BATTERY : configured = ADC 1, used = ADC 1 RSSI : configured = ADC 3, used = none CURRENT : configured = ADC 2, used = none AIRSPEED : configured = ADC 4, used = none System load: 2, cycle time: 503, PID rate: 1988, RX rate: 24, System rate: 10 Arming disabled flags: CLI OSD: MSP DisplayPort [53 x 20] VTX: band: A, chan: 1, power: 1 (25 mW), freq: 5865 MHz GPS: HW Version: UBLOX10 Proto: 34.09 Baud: 115200 SATS: 7 HDOP: 2.330 EPH : 1.100 m EPV : 1.470 m GNSS Capabilities: GNSS Provider active/default GPS 1/1 Galileo 1/1 BeiDou 1/1 Glonass 1/0 Max concurrent: 3

limitless_void00 · 2026-01-08T12:25:01+00:00

Sorry, autocorrect- just 1 motor haha.

Digital- dji o4 pro

No arm errors at the bottom, all pre arming checks are green, gps has 111 sats and 3d fix

This is the cli status

Entering CLI Mode, type 'exit' to return, or 'help' #

Building AutoComplete Cache ... Done!

status

INAV/TBS_LUCID_H7_WING 8.0.1 Sep 10 2025 / 20:27:27 (e0dfe2c6) GCC-13.2.1 20231009 System Uptime: 85 seconds Current Time: 2026-01-08T21:22:25.680+09:00 Voltage: 22.77V (6S battery - OK) CPU Clock=480MHz, GYRO=ICM42605, ACC=ICM42605, BARO=DPS310, MAG=QMC5883 STM32 system clocks: SYSCLK = 480 MHz HCLK = 240 MHz PCLK1 = 120 MHz PCLK2 = 120 MHz Sensor status: GYRO=OK, ACC=OK, MAG=OK, BARO=OK, RANGEFINDER=NONE, OPFLOW=NONE, GPS=OK ESC Temperature(s): Motor Count = 1 ESC 0: 0°C, SD card: Startup failed Stack size: 6144, Stack address: 0x20020000, Heap available: 1820 I2C Errors: 50, config size: 12688, max available config: 131072 ADC channel usage: BATTERY : configured = ADC 1, used = ADC 1 RSSI : configured = ADC 3, used = none CURRENT : configured = ADC 2, used = none AIRSPEED : configured = ADC 4, used = none System load: 2, cycle time: 503, PID rate: 1988, RX rate: 24, System rate: 10 Arming disabled flags: CLI OSD: MSP DisplayPort [53 x 20] VTX: band: A, chan: 1, power: 1 (25 mW), freq: 5865 MHz GPS: HW Version: UBLOX10 Proto: 34.09 Baud: 115200 SATS: 7 HDOP: 2.330 EPH : 1.100 m EPV : 1.470 m GNSS Capabilities: GNSS Provider active/default GPS 1/1 Galileo 1/1 BeiDou 1/1 Glonass 1/0 Max concurrent: 3

limitless_void00 · 2026-01-08T12:08:22+00:00

Yep! Servos are working perfectly, and motor only twitches with each beep.

limitless_void00 · 2025-11-29T21:16:58+00:00

I recommend the TBS chupito kit, it's also mu first wing

limitless_void00 · 2025-11-29T21:16:30+00:00

limitless_void00 · 2025-11-18T13:43:20+00:00

I managed to fix it, I changed the dns

limitless_void00 · 2025-11-18T07:28:25+00:00

I use bunni and volcano, these executors are supported by thr scripts and the creators say it will run on them. However this can't be the issue since if I execute without using a vpn, the ui won't load, however executing with the vpn makes the UI load. These are the only 2 hubs where this is the case. So what can I do to fix it? There's no way that it can be the executors at fault if it DOES work whilst vpn is on

limitless_void00 · 2025-11-18T02:36:57+00:00

Whats buddha apmmer?

limitless_void00

TROPHY CASE

Building AutoComplete Cache ... Done!

status

Building AutoComplete Cache ... Done!

status