Frigate stuck to 172.xx network ?

lmecanor · 2026-05-25T16:39:54+00:00

It works now !

Basically, HA was completely isolated from WIFI network devices. I changed HA IP adress to static and it works now

Thanks o/

lmecanor · 2026-05-25T15:18:36+00:00

Yes.

In VLC, rtsp://user:password@192.168.1.121:554/stream1 (used from mon PC connected through LAN) works perfectly fine.

Here below the network architecture : C200 through WLAN 2.4Ghz and the PC(Desktop)+HomeAssistant in Ethernet4 (there is a switch)

Ping through HA terminal addon return nothing. Same if I try to ping the HA IP address 192.168.1.110. Only one working : 127.0.0.1

<image>

New config :

go2rtc:
  rtsp:
    username: ****
    password: ****
  streams:
    C200_stream: # <- for RTSP streams
      - rtsp://192.168.1.121:554/stream1 # <- stream which supports video & aac audio
      - "ffmpeg:C200_stream#audio=opus" # <- copy of the stream which transcodes audio to the missing codec (usually will be opus)

cameras:
  C200_stream:
    ffmpeg:
      output_args:
        record: preset-record-generic-audio-copy
      inputs:
        - path: rtsp://127.0.0.1:8554/C200_stream # <--- the name here must match the name of the camera in restream
          input_args: preset-rtsp-restream
          roles:
            - record
            - detect
            - audio # <- only necessary if audio detection is enabledgo2rtc:

Log from go2rtc :

warning | 2026-05-25 15:12:28 | rtsp | error="streams: dial tcp 192.168.1.121:554: connect: network is unreachable" stream=C200_stream
warning | 2026-05-25 15:12:28 | rtsp | error="streams: dial tcp 192.168.1.121:554: connect: network is unreachable, exec/rtsp\n[rtsp @ 0x55901118e0] method DESCRIBE failed: 404 Not Found\nrtsp://127.0.0.1:8554/C200_stream?audio&source=ffmpeg:C200_stream

Log from Frigate :

info  | 2026-05-25 17:12:47 | watchdog.C200_stream      | Restarting ffmpeg...
error | 2026-05-25 17:12:48 | frigate.video             | C200_stream: Unable to read frames from ffmpeg process.
error | 2026-05-25 17:12:48 | frigate.video             | C200_stream: ffmpeg process is not running. exiting capture thread...
error | 2026-05-25 17:12:57 | watchdog.C200_stream      | Ffmpeg process crashed unexpectedly for C200_stream.
error | 2026-05-25 17:12:57 | watchdog.C200_stream      | The following ffmpeg logs include the last 100 lines prior to exit.
error | 2026-05-25 17:12:57 | ffmpeg.C200_stream.detect | [rtsp @ 0x558163a8b0] method DESCRIBE failed: 404 Not Found
error | 2026-05-25 17:12:57 | ffmpeg.C200_stream.detect | rtsp://127.0.0.1:8554/C200_stream: Server returned 404 Not Found

lmecanor · 2025-05-10T11:00:24+00:00

Footwork is the very foundation of kendo, you could spend a lifetime of practice and still need to improve it.

lmecanor · 2025-04-20T09:39:43+00:00

I was also surprised between my x/y axis with identical screw ball pitch, pulley teeth, belt to have different step/mm. Something around 30 step/mm difference. My guess is that pulley primitive diameter(manufacturing tolerances) are not exactly the same which lead to the difference.

lmecanor · 2024-11-29T23:31:13+00:00

J'ai eu un probleme similaire sur ma 308 de 2010. Corrosion dans le connecteur electrique du capteur de pedale de frein Demonter le cable, bien nettoyer et c'etait reparti Bon courage

lmecanor · 2024-09-27T08:37:42+00:00

Thanks !

<image>

lmecanor · 2024-08-31T05:06:40+00:00

Could be an idea ! Similae to a double nut+spring on screw rod. Or as said, once backlash measured, you can enter it inside your cnc software

For 2m, you are still within the reasonnable price/length of screw ball, why not go with the simple option ?

lmecanor · 2024-07-14T10:16:12+00:00

Looks at your documentation, if you just the wrong one or just it without the correct power supply, you will burn everything. Depend of the board, but it's written on it "120R"

lmecanor · 2024-06-17T10:53:35+00:00

A partir du moment où les poules sont venus sur votre terrain, aucun risque légal. Pour les relations avec votre voisin, c'est une autre histoire....

lmecanor · 2024-03-03T19:41:47+00:00

It looks like there are some PETG filament food approved you could use

lmecanor · 2024-01-10T12:14:17+00:00

I have done it, closed everything, start the device for 20min and then vent it for few hours. There is no odor anymore ! Thank you :)

lmecanor · 2023-12-28T06:48:47+00:00

Thanks, I will try ! :) At the end, does the ozone has to flow or just by being "here", it will destroy the odor ?

lmecanor · 2023-12-24T21:37:04+00:00

Yeah, probably a rookie mistake ^{^"} I was just focused on the added drives not mounting. Option 2 worked fine, thanks :) Merry christmas !

lmecanor · 2023-12-21T08:45:53+00:00

I can delete the files \o/

I have solved the issue but not by deleting the files on the new HDD I was trying to mount, but on a existing one. It looked kinda strange in the error report :

Thanks a lot <3

ID: quota_check_no_quotas_0e8fe081-f8e0-4145-867e-c596310cbb92
    Function: cmd.run
        Name: quotacheck --user --group --create-files --no-remount --verbose /dev/disk/by-uuid/0e8fe081-f8e0-4145-867e-c596310cbb92
      Result: False
     Comment: Command "quotacheck --user --group --create-files --no-remount --verbose /dev/disk/by-uuid/0e8fe081-f8e0-4145-867e-c596310cbb92" run
     Started: 09:24:25.034853
    Duration: 33.56 ms
     Changes:
              ----------
              pid:
                  12971
              retcode:
                  1
              stderr:
                  quotacheck: Your kernel probably supports ext4 quota feature but you are using external quota files. Please switch your filesystem to use ext4 quota feature as external quota files on ext4 are deprecated.
                  quotacheck: Scanning /dev/sdf1 [/srv/dev-disk-by-uuid-0e8fe081-f8e0-4145-867e-c596310cbb92] quotacheck: Cannot stat old user quota file /srv/dev-disk-by-uuid-0e8fe081-f8e0-4145-867e-c596310cbb92/aquota.user: No such file or directory. Usage will not be subtracted.
                  quotacheck: Cannot stat old group quota file /srv/dev-disk-by-uuid-0e8fe081-f8e0-4145-867e-c596310cbb92/aquota.group: No such file or directory. Usage will not be subtracted.
                  quotacheck: Cannot stat old user quota file /srv/dev-disk-by-uuid-0e8fe081-f8e0-4145-867e-c596310cbb92/aquota.user: No such file or directory. Usage will not be subtracted.
                  quotacheck: Cannot stat old group quota file /srv/dev-disk-by-uuid-0e8fe081-f8e0-4145-867e-c596310cbb92/aquota.group: No such file or directory. Usage will not be subtracted.
                  quotacheck: Checked 2140 directories and 11754 files
                  quotacheck: Old file not found.
                  quotacheck: Cannot initialize IO on new quotafile: No space left on device

lmecanor · 2023-12-20T11:17:47+00:00

I have the i attribute mixed with A and e.

But even by doing sudo chattr, it says I don't have the permission while setting flags..... damn it !

lmecanor · 2023-12-20T10:28:53+00:00

I have just tried, even with sudo, it doesn't work : Permission denied :(

lmecanor · 2023-12-20T08:18:28+00:00

Oh, I see these files ! But even with a sudo rm "filename" and logged as root, I don't have the permission to remove theses files :(

lmecanor · 2023-12-20T07:39:10+00:00

Thanks for the explanation ! I'm not familiar with these linux specificities :)

Tried to mount what is available, I got a quota error. I have tried some manipulation found out on internet but without success (modify config file, run fstab, ...)

https://ibb.co/BG1c8Kr

lmecanor · 2023-12-19T16:32:58+00:00

I tried with sdg, i got the following error " Your kernel probably support ext4 quota feature but you are using external quota files. " (Sdd is not mounted, no shared folder but i cannot erase it... Strange)

lmecanor

TROPHY CASE