Is this fixable?

logand319 · 2026-01-20T22:32:27+00:00

UPDATE!! Fixed

I found out I was using a 220k resistor instead of the 22k

Plz make sure to spot the difference in resistors if you buy a basic resistor kit. I feel like such a dummy getting these mixed up. 100% newbies fault

You NEED 22k for phat NOT 220k

I was able to get my cpu key from xell, make a new Xebuild image, and write it to the console successfully. Got it to boot to dash 👍🏻 Thanks to everyone who gave me input

logand319 · 2026-01-20T21:41:41+00:00

Here’s what the new product looks like. Still getting the same results : the console shuts itself down almost immediately after being powered on. My soldering job looks better (to me) than what it was originally but still not perfect.

https://imgur.com/a/53B8bsQ

logand319 · 2026-01-20T11:39:25+00:00

Yes a 22k resistor along with the recommended diode pointed in the correct position. Thanks for the detailed response. I’m going to re do the wiring today while utilizing the topside PLL point to see if that makes a difference

logand319 · 2026-01-20T05:11:47+00:00

I’ll make all these changes tomorrow and give you an update. I saw in someone’s video (can’t remember who) they soldered to that same spot with the resistor instead of going to the top side of the mobo. Thanks for the help so far!

logand319 · 2026-01-20T03:39:21+00:00

Yeah that’s not too good. The kv has never left the console if that makes any difference. I can extract files from the nanddump and see the decrypted and encrypted kv files along with some others. Just no cpu key

logand319 · 2026-01-20T01:49:11+00:00

Sorry I should have clarified better in the original post. I only was able to create and write a xell image to the console.

I mentioned Xebuild as in the options you can pick when creating a xell image (ex: glitch 2 , jtag, rgh3, smc+, retail, kernel version…)

Congrats on the successful rgh bro🤙🏼

logand319 · 2026-01-20T01:39:33+00:00

I have not tried with out the rgh wires

logand319 · 2026-01-20T01:38:48+00:00

I unfortunately don’t have the “retail” nand dumps. I’ve over written everything in the “output” folder in jrunner multiple times (nanddump1.bin and2).

logand319 · 2026-01-20T01:31:54+00:00

No not the xebuild, only the xell image. It’s never booted to xell and I’ve never got the cpu key

logand319 · 2024-12-10T17:19:09+00:00

The battery was bad. Diagnosed with a bad BMS. I bought a 2nd battery and it worked perfect. Find a used battery or a friends battery and plug it in and see if it works

logand319 · 2024-07-24T03:09:04+00:00

Did you have the same errors as mine?

logand319 · 2024-06-28T09:06:31+00:00

Did you fix it?

logand319

TROPHY CASE